• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2023

Super absorbent polymers (SAPs) are hydrophilic molecules that can absorb large amounts of water. This study was conducted to investigate the enhancement of the physicochemical properties of sand soil blended with three SAPs imbibed with 100, 150, and 200-fold water. Three treatments were applied, namely, 100SAP, 150SAP, and 200SAP. The three SAPs were blended at concentrations of 0% (control), 3%, 5%, 7%, and 10% with sand. The pH, electrical conductivity, and cation exchangeable capacity (CEC) of soil blended with the three SAPs were pH 6.35-6.46, 0.09-0.65 dS/m, and 1.42-1.92 cmol_c/kg, respectively, and their capillary porosity, total porosity, and saturated hydraulic conductivity were 21.0-29.3%, 39.2-48.7%, and 272-470 mm/hr. CEC, capillary porosity, total porosity, and saturated hydraulic conductivity of soil were positively correlated with the ratio of the SAPs (p<0.01). These results indicate that blending sand soil with SAPs increased CEC, capillary porosity, and saturated hydraulic conductivity, thus improving the nutrient-retention capacity, water-retention capacity, and permeability of the soil.

• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.397-412
• /
• 2021

In Experiment 1, the impact of using diets sufficient in P on the performance of weaned piglet growth with or without a super dose of phytase was investigated. One hundred and twelve piglets were randomized into four treatments with 7 replicates (4 piglets·cage^-1). Bodyweight (BW), daily gain (ADG), daily intake (ADFI) and feed conversion ratios (FCR) were measured over three weeks. Treatments included a positive control (PC) with a Ca : P ratio of 0.80 : 0.50%. and the negative control (NC) had a Ca : P ratio of 0.60 : 0.50%. The PC plus phytase was denoted as PC+, and the NC with the phytase diet was designated as NC+. The PC diet was formulated to meet or exceed the NRC (2012) standards for pigs weighing 7 - 25 kgs. Better results were obtained with the PC diet (p > 0.1) compared to the NC diet. The super dose of phytase in the PC+ diet significantly improved the overall FCR (p < 0.1). For Experiment 2, the impact of different calcium (Ca)/phosphorous (P) ratios with or without supplementation of vitamin D₃ was determined. Ninety-six piglets were randomized into four treatments with 6 replicates (4 piglets·cage^-1). The PC, NC1 and NC2 diets had ratios of 0.80 : 0.50, 0.80 : 0.45, and 0.60 : 0.45%, respectively. The fourth diet (PCV) was the PC diet fortified with vitamin D₃. Improved results were observed with the PC diet (p > 0.1) compared to the NC diets. Supplementing dietary 25-OH-D₃ in the PCV diet led to numerically higher ADG and ADFI scores with lower FCR values at the early nursery stage (p = 0.0044), but the vitamin supplement did not significantly influence the growth.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.455-464
• /
• 2017

Static loading test was performed on a composite girder with an I-shaped steel girder and SUPER concrete on the top of the steel in order to evaluate flexural behavior characteristics. Total length of the test specimen was 25m long and the depth was 786mm including compressive concrete section('casing' hereafter) with 80MPa strength. 4-point loading on simply-supported beam was applied up to 2,010kN. Results showed that yield strength at tensile steel was 2.7 times greater than service load and the ratio of ductility was 1.481. No cracks were found on the casing surface and the relative slip between different sections was insignificant.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.425-431
• /
• 2005

New type of supercapacitor using high surface area activated carbons mixed with high conductivity polypyrrole (Ppy) has been prepared in order to achieve low impedance and high energy density. Mixed carbons of BP-20 and MSP-20 were used as the active electrode material, and polypyrrole doped with 2-naphthalenesulfonic acid (2-NSA) and carbon black (Super P) as conducting agents were added to activated carbons in order to enhance good electric conductivity. Electrodes prepared with the activated electrode materials and the conducting agents were added to a solution of organic binder [P(VdF-co-HFP) / NMP]. The ratio of optimum electrode composition was 78 : 17 : 5 wt.％ of (MSP20 : BP-20=1 : 1), (Super P : Ppy=10 : 7) and P(VdF-co-HFP) respectively. The performance of unit cell with addition of 7 wt％ Ppy have shown specific capacitance of 28.02 F/g, DC-ESR of $1.34{\Omega}$, AC-ESR of $0.36{\Omega}$, specific energy of 19.87 Wh/kg and specific power of 9.77 kW/kg. With addition of Ppy, quick charge-discharge of unit cell was possible because of low ESR, low charge transfer resistance and quick reaction rate. And good stability up to 500 chargedischarge cycles were retained about 80％ of their original capacity. It was concluded that the specific capacitance originated highly from compound phenomena of the pseudocapacitance by oxidation-reduction of polypyrrole and the nonfaradaic capacitance by adsorption-desorption of activated carbons.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.343-350
• /
• 2003

The best Ppy weight ratio was 7 wt% and the optimal electrode composition ratio was 78 : 17 : 5 wt.% of (MSP-20 : BP-20 =1 : 1), (Super P : Ppy =10 : 7) and P(VdF-co-HFP). Implantation of Ppy as the conducting agents have led to superior electrochemical characteristics because of the low of internal resistance and faradaic capacitance. The result of unit cell with Ppy 7 wt% were as follows: 28.02 Fig of specific capacitance, 1.34 Ω of DC-ESR and 0.36 Ω of AC-ESR. Unit cell showed a good stability up to 200 charge-discharge cycles, retaining 82% of their original capacity at 200 cycles. From the analysis of impedance, the electrodes with Ppy 7 wt% showed low ESR, low charge transfer resistance and quick reaction rate. It was inferred that quick charge-discharge was possible. As compared with the specific capacitance (rectangular shape) of CV, it was also concluded that the specific capacitance originated from thecompound phenomena of the faradaic capacitance by oxidation and reduction of Ppy and the non-faradaic capacitance by adsorption-desorption of activated carbon.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.1
• /
• pp.6-11
• /
• 2018

For the high performance of the secondary battery to satisfy the demands in electronic and energy industries, it is necessary to develop more safe, environmentally friendly and economical electrode. Recently, lithium-sulfur batteries are receiving attention as next-generation secondary cells in terms of its remarkable theoretical capacity, energy density and environmental characteristics. However, they have not yet overcome a fading phenomenon due to the dissolving of the polysulfide. In this study, we intend to fabricate a battery using sulfur, a higher energy density than the other bipolar materials, as an improved secondary cell electrode material. The aim of the study is to improve battery performance with an optimal ratio of the cathode components; such as sulfur of active material and Super P of an electronic conductor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1605-1610
• /
• 2012

Two experiments were conducted to study the effects of red pepper (Capsicum frutescens) powder or red pepper pigment on the performance and egg yolk color of laying hens. In Exp. 1, 210, thirty-wk old, Hy-line Brown laying hens were fed one of seven diets containing 0.3, 0.6, 1.2, 2.0, 4.8 or 9.6 ppm red pepper pigment or 0.3 ppm carophyll red. Each diet was fed to three replicate batteries of hens with each battery consisting of a row of five cages of hens with two hens per cage (n = 3). In Exp. 2, 180, thirty-wk old, Hyline Brown laying hens, housed similarly to those in Exp. 1, were fed an unsupplemented basal diet as well as treatments in which the basal diet was supplemented with 0.8% red pepper powder processed in a laboratory blender to an average particle size of $300{\mu}m$, 0.8% red pepper powder processed as a super fine powder with a vibrational mill ($44{\mu}m$) and finally 0.8% red pepper powder processed as a super fine powder with a vibrational mill but mixed with 5% $Na_2CO_3$ either before or after grinding. A diet supplemented with 0.3 ppm carophyll red pigment was also included (n = 3). In both experiments, hens were fed the red pepper powder or pigment for 14 days. After feeding of the powder or pigment was terminated, all hens were fed the basal diet for eight more days to determine if the dietary treatments had any residual effects. In Exp. 1, there were no differences in egg-laying performance, feed consumption or feed conversion ratio due to inclusion of red pepper pigment in the diet. Average egg weight was higher (p<0.05) for birds fed 1.2, 2.4 or 9.6 ppm red pepper pigment than for birds fed the diet containing 0.3 ppm red pepper pigment. On d 14, egg color scores increased linearly as the level of red pepper pigment in the diet increased. In Exp. 2, feeding red pepper powder did not affect egg-laying performance, feed consumption or feed conversion ratio (p>0.05). However, compared with the control group, supplementation with all of the red pepper powder treatments increased egg weight (p<0.05). All the red pepper powder treatments also increased (p<0.05) the yolk color score compared with the control. The results of the present study suggest that both red pepper powder and pigment are effective feed additives for improving egg yolk color for laying hens.

• Computers and Concrete
• /
• v.24 no.2
• /
• pp.137-150
• /
• 2019

In this paper, surrogate models such as multivariate adaptive regression splines (MARS) and M5P model tree (M5P MT) methods have been investigated in order to propose a new formulation for the 28-days compressive strength of self-compacting concrete (SCC) incorporating metakaolin as a supplementary cementitious materials. A database comprising experimental data has been assembled from several published papers in the literature and the data have been used for training and testing. In particular, the data are arranged in a format of seven input parameters covering contents of cement, coarse aggregate to fine aggregate ratio, water, metakaolin, super plasticizer, largest maximum size and binder as well as one output parameter, which is the 28-days compressive strength. The efficiency of the proposed techniques has been demonstrated by means of certain statistical criteria. The findings have been compared to experimental results and their comparisons shows that the MARS and M5P MT approaches predict the compressive strength of SCC incorporating metakaolin with great precision. The performed sensitivity analysis to assign effective parameters on 28-days compressive strength indicates that cementitious binder content is the most effective variable in the mixture.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.344-352
• /
• 2010

Objectives: The purpose of this study was to determine the setting time, compressive strength, solubility, and pH of mineral trioxide aggregate (MTA) mixed with glass ionomer cement (GIC) and to compare these properties with those of MTA, GIC, IRM, and SuperEBA. Materials and Methods: Setting time, compressive strength, and solubility were determined according to the ISO 9917 or 6876 method. The pH of the test materials was determined using a pH meter with specified electrode for solid specimen. Results: The setting time of MTA mixed with GIC was significantly shorter than that of MTA. Compressive strength of MTA mixed with GIC was significantly lower than that of other materials at all time points for 7 days. Solubility of 1 : 1 and 2 : 1 specimen from MTA mixed with GIC was significantly higher than that of other materials. Solubility of 1 : 2 specimen was similar to that of MTA. The pH of MTA mixed with GIC was 2-4 immediately after mixing and increased to 5-7 after 1 day. Conclusions: The setting time of MTA mixed with GIC was improved compared with MTA. However, other properties such as compressive strength and pH proved to be inferior to those of MTA. To be clinically feasible, further investigation is necessary to find the proper mixing ratio in order to improve the drawbacks of MTA without impairing the pre-existing advantages and to assess the biocompatibility.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.825-834
• /
• 2005

Two experiments were conducted with growing crossbred Super-Meat ducks at the experimental duck farm of Cantho University to evaluate the effects of reducing the proportion of soybean meal (SBM) in a broken rice (BR)-SBM mixture and providing soya waste (SW) ad libitum (Expt. 1), and reducing the proportion of fish meal (FM) in a BR-FM mixture and supplying ensiled shrimp waste (ESW) ad libitum (Expt.2). Both experiments included five treatments, with three replicates and ten growing ducks per replicate. In Expt.1, the five diets were based on BR and five levels of SBM, with SW offered ad libitum. The control diet (SBM25) consisted of 75% BR and 25% SBM, and the other four treatments included SBM levels of 20% (SBM20), 14% (SBM14), 8% (SBM8) and 0% (SBM0) mixed with BR to 100%, and with SW ad libitum. In Expt. 2, the control diet consisted of 86% BR and 14% FM, and the other dietary treatments had FM levels of 11% (FM11), 8% (FM8), 4% (FM4) and 0% (FM0) mixed with BR, and with ESW ad libitum. In Expt. 1, total intakes of dry matter (DM), neutral detergent fiber (NDF), acid detergent fiber (ADF) and metabolizable energy (ME) were higher for birds given SW (p<0.001). Total CP intake was highest on the SBM20 diet, and lowest on the SBM0 diet (p<0.001). Lower daily gain (DG) was found for the SBM0 diet (p<0.01). Carcass weights were higher on the control treatment, with the lowest values on the SBM0 diet (p<0.001). Gizzard weights were higher on diets with high intakes of SW (p<0.05). In Expt. 2, birds with high intakes of ESW (FM4 and FM0) had lower (p<0.01) daily intakes of DM. The total CP intakes declined (p<0.001) with higher intakes of ESW. The highest DG were for the control and FM11 diets, while the lowest value was for diet FM0 (p<0.001). The poorest feed conversion ratio (FCR) was for the FM0 treatment (p<0.01). Lower weights of carcass and breast muscle were found on the FM0 diet (p<0.001). Feed costs per kg gain were only slightly different between diets. However, the lowest feed cost was for ducks on the SBM0 and FM11 diets in Expt.1 and Expt. 2, respectively.