• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.71-74
• /
• 2008

NUFLEX is a general purpose thermo/fluid flow analysis program which has various physical models including spray. In NUFLEX, spray models are composed of breakup and collision models of droplet. However, in case of diesel engine, interaction between wall-film and impingement model considering heat transfer is not coded in NUFLEX. In this study, Lee & Ryou impingement & wall-film model considering heat transfer is applied to NUFLEX. For the verification of this NUFLEX program, numerical results are compared with experimental data. Differences of film thickness and radius between numerical results and experimental data are within 10% error range. The results show that NUFLEX can be used for comprehensive analysis of spray phenomena.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.99-102
• /
• 2007

NUFLEX is a general purpose program for the analysis 3D thermo/fluid flow and pre/post processor in a complex geometry. NUFLEX is composed various physical models, such as phase change(solidification/melting) and spray, MHD(Magneto Hydraulic Dynamics) models. It is possible to simulate of continuous cast iron process and spray droplet breakup/collision phenomenon. For the verification of these models, compared with the experimental data and commercial CFD code's results. The results show good agreements with experimental and comercial CFD codes's results.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.1
• /
• pp.173-183
• /
• 2011

Global logistics including Korea had developed at various fields through the developed IT technology. In addition, in changing into Internet based digital economy times, economic and logistics activities became extending into worldwide over the cross-border. Logistics activity performed by off-line rapidly changed in real environment. But, unfortunately business process modeling about the whole logistics was not happened, even though process modeling had done by transport stages or logistics entities. Therefore, it is difficult to grasp the whole logistics. Additional cost and time was requested due to no association between logistics entities and invisibility. So, this paper has to be process modeling for logistics industry domain. For objective modeling, work area shall be divided and it extracts general work process per each area. And then it defines subprocess of general work process. Cargo tracking in logistics industry domain means to grasp the status and present states at transportation or storage stage. This paper defines business process and data model for electronic processed work area using the UN/CEFACT standard modeling methodology.

• Journal of Engineering Education Research
• /
• v.14 no.6
• /
• pp.60-66
• /
• 2011

The curriculum system and documentation for advanced general education, MSC (Mathematics, Basic Science, Computer Science), and engineering-design courses have been developed to improve the education of advanced undergraduate students in engineering and technology at Chosun University. In this paper, to obtain improved quality of engineering courses, we systemized the education of engineering and technology, which could be designed as the education satisfying students and provide awards for high-quality performance, through efficient management of education courses and establishment of basic and professional courses. In addition, by applying evaluation to the engineering courses and using the model of continuous quality improvement, we could achieve a high-quality education system for the engineering and technology courses.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1411-1418
• /
• 2005

Obesity is not classed in general psychiatry disease. But, psychoneurotic factor has been known to be a risk factor of obesity. In order to evaluate and understand the psychoneurotic state on obese patient, this study used Minnesota Multiphasic Personality Inventory(MMPI). Total patients were classified into 3 or 5 clusters. MMPI scores were compared according to education, BMI and Sasang Constitution. Multiple regression analysis were used for psychological factor on obese patients by age, height, weight, education, percent body fat, fat distribution, BMI. Based on this study, it was no significantly difference by education level, BMI, sasang(四象) constitution except L profile according to BMI. These result is different from our general recognition of the psychoneurotic state on obese patient. Therefore, the bigger sample study is needed.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.6
• /
• pp.885-888
• /
• 2000

Electroantennogram(EAG) can be applied to detect odorants since insects have highly specialized olfactory receptors inside their antennae. The characteristics of EAG parameters were investigated for the quantitative measurement of a general odorant using ammonia as a model odorant. The antennae of male silkworm moth, Bombyx mori, were used for the EAG. The electical signal curves generated from a pair of antennae originating from the same silkworm moth were never identical; however, they exhibited a typical type I or type II characteristic curve pattern for every pair of antennae. The correlation between the EAG parameters and the ammonia concentration was analyzed for the type I and type II antennae. The stability of each parameter was also investigated for each type of antenna. The results show the possibility of the quantitative measurement of general odorants using the EAG technique.

• Korea Journal of Hospital Management
• /
• v.22 no.3
• /
• pp.31-45
• /
• 2017

The research is to examine medical service quality factors affecting choice of hospital(revisiting intention, and recommendation) in large general hospitals based on the SERVQUAL model. The study have surveyed 400 respondents in Gangbuk-gu not having any tertiary hospital. The main results of the analyses indicate: 1) 'assurance' and 'empathy' of medical service are basically, positively affect revisiting intention and recommendation; 2) 'empathy' is the most important factor affecting revisiting intention; and 3) 'tangibility' significantly affects recommendation of general hospitals to other people. The study suggests that it is necessary to pay more attention on 'empathy' among SERVQUAL factors to increase satisfaction of patients and to find better ways of improving medical service quality.

• Journal of applied mathematics & informatics
• /
• v.23 no.1_2
• /
• pp.73-86
• /
• 2007

The general stereographic projection which maps a point on a sphere with arbitrary radius to a point on a plane stereographically and its inverse projection have the pythagorean-hodograph (PH) preserving property in the sense that they map a PH curve to another PH curve. Upon this fact, for given spatial $C^1$ Hermite data, we construct a spatial PH curve on a sphere that is a $C^1$ Hermite interpolant of the given data as follows: First, we solve $C^1$ Hermite interpolation problem for the stereographically projected planar data of the given data in $\mathbb{R}^3$ with planar PH curves expressed in the complex representation. Second, we construct spherical PH curves which are interpolants for the given data in $\mathbb{R}^3$ using the inverse general stereographic projection.

• Structural Engineering and Mechanics
• /
• v.8 no.6
• /
• pp.561-578
• /
• 1999

The response of a reinforced concrete structure to loading is both immediate and time-dependent. Under a sustained load, the deflections caused by creep and shrinkage may be several times their instantaneous values. The paper describes a general finite element procedure, based on the so-called layered model, to analyse reinforced concrete members, and shows in particular how the simple Step by Step Method may be incorporated into this procedure. By invoking the Modified Newton Raphson Method as a solution procedure, the accuracy of the finite element method is verified against independent test results, and then applied to a variety of problems in order to demonstrate its efficacy. The method forms a general method for analysing highly indeterminate concrete structures in the time domain.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.87-93
• /
• 2017

In this paper, we design a small low power single channel ECG(Electrocardiogram) system of Chest Belt type with fiber-type electrodes to measure emotional state change of game addict. HRV(Heart Rate Variability) is analyzed through heart rate signal measurement and the psychological stress state is judged by using it. And it verifies its effectiveness through prototype. First, we design HR measurement module through low power MCU(Micro Controller Unit) and implement prototype level measurement system. The results showed that the difference between the addiction group and the general group was confirmed and that the system was effective. The result of this study can be used for health management such as reduction of stress of the user through music and breathing that lowers the stress by detecting the stress state of the general person or the chronic ill person.