• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.379-384
• /
• 2002

The effect of size and volume fraction of ceramic particles with sliding velocity on the wear properties were investigated for the metal matrix composites fabricated by pressureless infiltration process. The particulate metal matrix composites exhibited about 5.5 - 6 times of excellent wear resistance compared with AC8A alloy at high sliding velocity, and as increasing the particle size and decreasing the volume fraction the wear resistance was improved. The wear resistance of metal matrix composites and AC8A alloy exhibited different aspects. Wear loss of AC8A alloy increased with sliding velocity linearly. whereas metal matrix composites indicated more wear loss than AC8A alloy at slow velocity region, however a transition point of wear loss was found at middle velocity region which show the minimum wear loss, and wear loss at high velocity region exhibited nearly same value with slow velocity region. In terms of wear mechanism, the metal matrix composites exhibited the abrasive wear at slow to high sliding velocity generally, however AC8A alloy showed abrasive wear at low sliding velocity and adhesive and melt wear at high sliding velocity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.91-91
• /
• 2008

$SnO_2-B_2O_3-P_2O_5$ system were prepared by melt-quenching technique in the compositional series containing 50, 55 aod 60mol.% of $SnO_2$. A large glass-forming region was found at the phosphate side of the ternary system with homogeneous glasses containing up to 5-25mol.% of $B_2O_3$. For these glasses, thermal expansion coeffient($\alpha$), glass transition temperature(Tg), and glass softening temperature(Ts), were determined. The values a decrease with increasing $B_2O_3$ content, while Tg and Ts increased. The reason for the observed changes is local structure of the glasses. Local structure of the glasses was investigated by Raman and FT-IR measurements, suggesting that the number of bridging oxygens decreased whereas the non-bridging oxygen concentration increased with increasing $SnO_2$ content in the glasses.

• 한국약용작물학회지
• /
• 제14권3호
• /
• pp.178-182
• /
• 2006

둥굴레 유전자원의 유연관계를 위한 기초 자료를 얻고자 둥굴레속 식물 수집종 10종에서 18S ribosomal RNA를 암호화하는 18S rDNA 영역의 염기서열을 결정하고 그 특성을 분석한 결과를 요약하면 다음과 같다. 둥굴레속 10종의 18S rDNA 영역 전체의 길이는 $913{\sim}914bp$로 비슷하였으나, 총 8개 지점에서 염기의 치환 및 결실에 의한 변이가 발생하였다. 전위는 $T{\rightarrow}C$전위가 4개 지점에서 발생하였고, $A{\rightarrow}G$ 전위가 1개 지점에서 발생하였으며, 전좌는 $C{\rightarrow}A$ 전좌가 1개 지점에서 발생하여 전위가 전좌보다 5배 만큼 발생하였다. 결실은 2개 지점에서 발생하였다. 18S rDNA의 염기의 조성은 adenine $23.09{\sim}23.33%$, guanine $23.33{\sim}23.52%$, thymine $25.60{\sim}25.85%$, cytosine $27.38{\sim}27.79%$로 pyrimidine계가 purine계보다 많았다. 18S rDNA의 A + T 함량은 $48.80{\sim}49.18%$로 평균 48.99%였고, G+C 함량은 $50.82{\sim}51.20%$로 평균51.01%였다. 다중 정렬에 의해 염기서열을 비교한 결과 $99.7{\sim}100%$ 일치하여 종간에 차이가 적었다.

• 폴리머
• /
• 제38권3호
• /
• pp.299-306
• /
• 2014

ZnO pillared saponite was synthesized via a microwave hydrolysis method. To enhance interfacial compatibility between zinc oxide (ZnO) pillared saponite and poly lactic acid (PLA), ZnO pillared organic saponite was prepared by intercalation modification of cetyltrimethylammonium bromide. Moreover, PLA/ZnO pillared organic saponite nanocomposites were prepared by melting processing. The microstructure analysis of PLA/ZnO pillared organic saponite nanocomposites showed that ZnO pillared organic saponite was exfoliated and homogeneouslydispersed in PLA matrix. The property results showed that ZnO pillared organic saponite improved the mechanical properties and thermal stabilities of PLA/ZnO pillared organic saponite nanocomposites. Differential scanning calorimetry (DSC) demonstrated that ZnO pillared organic saponite restrained the appearance of cold crystallization, lowered the glass transition temperature and melting temperature of PLA, and improved the crystallinity of PLA. The results demonstrated that ZnO pillared organic saponite had a good interfacial compatibility and heterogeneous nucleation effect in PLA matrix, and also played an active role in accelerating the crystallization process of PLA.

• 천문학회보
• /
• 제44권2호
• /
• pp.60.4-60.4
• /
• 2019

Small bodies in the solar system are pristine leftovers of planetesimals since the formation epoch (~4.6 Gyr ago). After the formation, icy planetesimals have been preserved in the distant cold place beyond 30 au (i.e., Trans-Neptunian region) until recently without any catastrophic processes but have just been injected into inner region (<~5 au from the Sun) to be observed as comets. On the contrary, asteroids are rocky primitive objects (although some of them contains icy volatiles) distributing in the mainbelt between Mars and Jupiter orbits. Because of frequent encounters in the mainbelt, asteroids have experienced a number of repeated impacts until the present day. Namely, it is important to investigate thermal alternation process of cometary volatiles and refractories in the solar radiation field, whereas collisional and subsequence phenomena of asteroidal bodies. Although recent spacecraft observations revealed the physical natures on the surfaces of comets and asteroids, their interiors still remain largely unexplored. It is likely that a sudden brightening of a comet is associated with rapid sublimation of internal CO and CO2 or phase transition of amorphous H2O. An episodic dust ejection from an asteroid is causally related to an impact among asteroids, sudden sublimation of remaining subsurficial volatiles, etc. Because these transient phenomena provide rare opportunities to investigate their interiors, immediate observations using any optical instruments are particular important. In my presentation, I will review some examples of such transient phenomena in the solar system and propose possible collaborative research using the Korean Small Telescope Network.

• 한국수소및신에너지학회논문집
• /
• 제17권2호
• /
• pp.125-132
• /
• 2006

The alloys which compositions were represented by the formula, $Ti_{(0.22+X)}Cr_{(0.28+1.5X)}V_{(0.5-2.5X)}$ ($0{\leq}X{\leq}0.12$), had the total hydrogen storage capacity higher than 3 wt% and the effective hydrogen storage capacity higher than 1.4 wt%. Particularly, among all the tested alloys, the $Ti_{0.32}Cr_{0.43}V_{0.25}$ alloy exhibited the best effective hydrogen storage capacity of 1.65 wt%. Furthermore, the reversible bcc${\leftrightarrow}$fcc structural transition was observed with hydrogenation and dehydrogenation, which predicted the possibility of pressure cycling. EDS analysis revealed micro-segregation, which suggested the necessity of microstructure homogenization by heat treatment. The $Ti_{0.32}Cr_{0.43}V_{0.25}$ alloy was selected for heat treatment and for other related studies. The results showed that the total and the effective hydrogen storage capacity increased to 3.7 wt% and 2.3 wt%, respectively. The flatness of the plateau region was also greatly improved and heat of hydride formation was determined to be approximately -36 kJ/mol $H_2$.

• Journal of Microbiology and Biotechnology
• /
• 제1권4호
• /
• pp.256-260
• /
• 1991

In B. subtilis, $\alpha$-amylase synthesis is regulated by amyR located directly on the upstream of amyE. Three different amyR alleles have been reported, amyR1, amyR2 and amyR3. Strains bearing the gra-10 mutation which confers derepression for catabolite repression has GlongrightarrowA transition mutation at ＋5 of amyR1. S1 nuclease mapping demonstrated that transcription initiated at 8 bases downstream from the -10 region of putative E$\sigma^{A}$ promoter P1 in amyR1 and gra-10. In amyR2, the major transcription initiatd at the same place and the minor, 10 bases downstream from -10 of P2. The transcript from P2 contributed approximately 15-20% of total amyE mRNA. S1 nuclease protection experiment indicated that amyE mRNA levels corresponded to the rate of synthesis assumed by specific activities of $\alpha$-amylase in culture supernatants, suggesting that $\alpha$-amylase synthesis is regulated at the level of transcription.n.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제3권3호
• /
• pp.159-167
• /
• 1999

This study performed experiments for measuring corrosion potential and current density variations in the polarzation curves of polyvinylchloride. The results were examined to identify particular influences affectingthe corrosion potential such as temperature, pH, enzyme, and salt. The lines representing active anodic dissolution were only slightly shifted in the potential direction by temperature, pH, enzyme and salt. The Tafel slope for the anodic dissolution was determined using the polarization effect with varying conditions. The slope of the polarization curves describing the active-to-passive transition region was noticeably shifted in the potential direction. In addition, using the variation in conditions, the best temperature and pH were determined for the corrosion rate, and resistance of corrosion. The second anodic current density peak and maximum passive current density were designated as degraded(IP/I0). The value of IP/I0 was used in measuring the extent of the degradation of the polyvinychloride. The potentiodynamic parameters of the corrosion were obtained using a Tafel plot.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1042-1044
• /
• 2003

The photoluminescence (PL) properties are studied for a new phosphor $BaZr(BO_{3})_{2}$ doped with $Eu^{3+}$ activator ion. The excitation spectrum shows strong absorption in the vacuum ultraviolet (VUV) region with an absorption band edge at 200 nm. The PL spectrum shows the strongest emission at 615 nm corresponding to the electric dipole $^{5}D_{0}\;{\rightarrow}\;^{7}F_{2}$ transition of $Eu^{3+}$, which results in a good color purity.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권1호
• /
• pp.43-50
• /
• 2000

In this study, experiments were carried out to measure the variations in the corrosion potential and current density of polarization curves using polycarbonate. The results were particularly examined to identify the influences affecting the corrosion potential including various conditions such as temperature, pH, catalytic enzyme, and salt. The lines representing the active anodic dissolution were only slightly shifted in the potential direction by temperature, pH, enzyme, and salt. The tafel slope for the anodic dissolution was determined based on the polarization effect with various conditions. The slope of the polarization curves describing the active-to-passive transition region were noticeably shifted in direction. Also, from the variation in the conditions, the optimum conditions were established for the most rapid transformation, including temperature, pH, corrosion rate, and resistance of corrosion potential. The second anodic current density peak and maximum passive current density were designated as the critical corrosion sensitivity(Ir/If). The value of Ir/If was then used in measuring the extent of the critical corrosion sensitivity of the polycarbonate. The potentiodynamic parameters of the corrosion were obtained using a Tafel plot.