• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.189-189
• /
• 2012

Lead sulfide (PbS) nanocrystal quantum dots (NQDs) are promising materials for various optoelectronic devices, especially solar cells, because of their tunability of the optical band-gap controlled by adjusting the diameter of NQDs. PbS is a IV-VI semiconductor enabling infrared-absorption and it can be synthesized using solution process methods. A wide choice of the diameter of PbS NQDs is also a benefit to achieve the quantum confinement regime due to its large Bohr exciton radius (20 nm). To exploit these desirable properties, many research groups have intensively studied to apply for the photovoltaic devices. There are several essential requirements to fabricate the efficient NQDs-based solar cell. First of all, highly confined PbS QDs should be synthesized resulting in a narrow peak with a small full width-half maximum value at the first exciton transition observed in UV-Vis absorbance and photoluminescence spectra. In other words, the size-uniformity of NQDs ought to secure under 5%. Second, PbS NQDs should be assembled carefully in order to enhance the electronic coupling between adjacent NQDs by controlling the inter-QDs distance. Finally, appropriate structure for the photovoltaic device is the key issue to extract the photo-generated carriers from light-absorbing layer in solar cell. In this step, workfunction and Fermi energy difference could be precisely considered for Schottky and hetero junction device, respectively. In this presentation, we introduce the strategy to obtain high performance solar cell fabricated using PbS NQDs below the size of the Bohr radius. The PbS NQDs with various diameters were synthesized using methods established by Hines with a few modifications. PbS NQDs solids were assembled using layer-by-layer spin-coating method. Subsequent ligand-exchange was carried out using 1,2-ethanedithiol (EDT) to reduce inter-NQDs distance. Finally, Schottky junction solar cells were fabricated on ITO-coated glass and 150 nm-thick Al was deposited on the top of PbS NQDs solids as a top electrode using thermal evaporation technique. To evaluate the solar cell performance, current-voltage (I-V) measurement were performed under AM 1.5G solar spectrum at 1 sun intensity. As a result, we could achieve the power conversion efficiency of 3.33% at Schottky junction solar cell. This result indicates that high performance solar cell is successfully fabricated by optimizing the all steps as mentioned above in this work.

• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.179-185
• /
• 2005

As the electrodes of secondary battery are made with sulfur compounds, excellent electrode system of environmental non-toxicity, high specific energy density and low material cost can be obtained. In this study, the $FeS_2$ fine compound powders for active material in the battery were synthesized by mechanical alloying. Fine Fe-53.5 wt.%S powders of 450 nm of mean size were fabricated by mechanical alloying for 60 hours at the horizontal attritor. As the mechanical alloying time increases, particle size of Fe-53.5 wt.%S was decreased and steady state of Fe-53.5 wt.%S compound powders was obtained at 30 hours. Fe-53.5 wt.%S cathode shows the excellent discharge capacity (1011 mAh/g).

• 대한화학회지
• /
• 제32권2호
• /
• pp.130-134
• /
• 1988

수은방울전극에서 바로 시안이온을 시차펄스음극벗김 전압전류 법으로 측정한 결과 검출한계를 낮출수가 있었다. 가장 알맞는 실험조건은 다음과 같다. : 0.1M KCl-0.01M 인산염 지지전해질, pH 7, 석출전위 0.00V, 그리고 석출시간 3분이었다. 이 조건에서 검출한계는 $3{\times}10^{-7}M$ (8ppb) $CN^-$이다.

• 한국재료학회지
• /
• 제30권5호
• /
• pp.217-222
• /
• 2020

The design and fabrication of catalysts with low-cost and high electrocatalytic activity for the oxygen evolution reaction (OER) have remained challenging because of the sluggish kinetics of this reaction. The key to the pursuit of efficient electrocatalysts is to design them with high surface area and more active sites. In this work, we have successfully synthesized a highly stable and active NiCo₂S₄ nanowire array on a Ni-foam substrate (NiCo₂S₄ NW/NF) via a two-step hydrothermal synthesis approach. This NiCo₂S₄ NW/NF exhibits overpotential as low as 275 mV, delivering a current density of 20 mA cm^-2 (versus reversible hydrogen electrode) with a low Tafel slope of 89 mV dec^-1 and superior long-term stability for 20 h in 1 M KOH electrolyte. The outstanding performance is ascribed to the inherent activity of the binder-free deposited, vertically aligned nanowire structure, which provides a large number of electrochemically active surface sites, accelerating electron transfer, and simultaneously enhancing the diffusion of electrolyte.

• 센서학회지
• /
• 제32권4호
• /
• pp.207-212
• /
• 2023

H₂S is a toxic and harmful gas, even at concentrations as low as hundreds of parts per million; thus, developing an H₂S sensor with excellent performance in terms of high response, good selectivity, and fast response time is important. In this study, an H₂S sensor with a high response and fast response time, consisting of a sensing material (SnO₂), an electrode, a temperature sensor, and a micro-heater, was developed using micro-electro-mechanical system technology. The developed H₂S sensor with a micro-heater (circular type) has excellent H₂S detection performance at low H₂S concentrations (0-10 ppm), with quick response time (<16 s) and recovery time (<65 s). Therefore, we expect that the developed H₂S sensor will be considered a promising candidate for protecting workers and the general population and for responding to tightened regulations.

• Composites Research
• /
• 제29권4호
• /
• pp.167-172
• /
• 2016

$Co_9S_8/reduced$ graphene (CSRG) has been prepared by a facile two step hydrothermal method and used as a supercapacitor electrode material. It is anticipated that the $Co_9S_8$ and reduced graphene oxide (RGO) would serve as a spacer material to each other to stop the agglomeration and simultaneous contribution of electrical double layer capacitance (RGO) and pseudocapacitance ($Co_9S_8$) would provide high electrochemical properties. The chemical analysis has been done by Fourier transform infrared spectroscopy and the morphology is characterised by field emission scanning electron microscopy. CSRG shows a high electrical conductivity of $98S\;m^{-1}$. The symmetric supercapacitor shows a specific capacitance of ${\sim}728F\;g^{-1}$ with a current density of $2A\;g^{-1}$. CSRG also showed an energy density of $25.2Wh\;kg^{-1}$ with a power density of $1000W\;kg^{-1}$.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.223-230
• /
• 2011

An electrolytic oxidation process was applied to remove odorous compounds from non-point odor sources including wastewater pipelines and manholes. In this study, a distance between the anode and the cathode of the electrolytic process was varied as a system operating parameters, and its effects on odor removal efficiencies and reaction characteristics were investigated. Odor precursors such as sediment organic matters and reduced sulfur/nitrogen compounds were effectively oxidized in the electrolytic process, and a change in oxidation-reduction potential (ORP) indicated that an stringent anaerobic condition shifted to a mild anoxic condition rapidly. At an electrode distance of 1 cm and an applied voltage of 30 V, a system current was maintained at 1 A, and the current density was 23.1 $mA/cm^{2}$. Under the condition, the removal efficiency of hydrogen sulfide in gas phase was found to be 100%, and 93% of ammonium ion was removed from the liquid phase during the 120 minute operating period. Moreover, the sulfate ion (${SO_4}^{2-}$) concentration increased about three times from its initial value due to the active oxidation. As the specific power consumption (i.e., the energy input normalized by the effective volume) increased, the oxidation progressed rapidly, however, the oxidation rate was varied depending on target compounds. Consequently, a threshold power consumption for each odorous compound needs to be experimentally determined for an effective application of the electrolytic oxidation.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2895-2900
• /
• 2014

We fabricated quantum dot-sensitized solar cells (QDSSCs) using cadmium sulfide (CdS) and cadmium telluride (CdTe) quantum dots (QDs) as sensitizers. A spin coated $TiO_2$ nanoparticle (NP) film on tin-doped indium oxide glass and sputtered Au on fluorine-doped tin oxide glass were used as photo-anode and counter electrode, respectively. CdS QDs were deposited onto the mesoporous $TiO_2$ layer by a successive ionic layer adsorption and reaction method. Pre-synthesized CdTe QDs were deposited onto a layer of CdS QDs using a direct adsorption technique. CdS/CdTe QDSSCs had high light harvesting ability compared with CdS or CdTe QDSSCs. QDSSCs incorporating single-walled carbon nanotubes (SWNTs), sprayed onto the substrate before deposition of the next layer or mixed with $TiO_2$ NPs, mostly exhibited enhanced photo cell efficiency compared with the pristine cell. In particular, a maximum rate increase of 24% was obtained with the solar cell containing a $TiO_2$ layer mixed with SWNTs.

• 한국수소및신에너지학회논문집
• /
• 제11권3호
• /
• pp.119-125
• /
• 2000

가시광선을 이용하여 수용액 상태의 황화수소부터 수소를 제조하기 위해 사용되는 CdS 입자막전극의 광효율 개선과 광안정성 향상을 위해 막전극을 표면처리하였다. CdS 입자막 전극에 사용되는 CdS 입자는 $Cd{NO_3}{\cdot}9H_2O$와 $Na_2S{\cdot}4H_2O$의 혼합 침전법에 의해 제조하였다. 입자 결정상을 제어하기 위해 고압반응기에서 온도를 바꿔가며 12시간 동안 수열처리하였다. 이렇게 제조된 CdS 졸을 이용하여 캐스팅법으로 막전극을 제조하였으며, $TiCl_4$ 수용액을 사용하여 후처리 하였다. CdS 입자의 결정상은 XRD pattern으로 확인하였고, 평균 일차입자크기는 XRD pattern과 Scherrer 식에 의해 계산하였다. 입자 형상과 막 표면 형태는 SEM으로 관찰하였다. 수소 발생은 Xe램프가 장착된 연속흐름 광반응 장치를 이용하여 광전기화학적 방법과 광화학적 방법으로 각각 측정하였다. $TiCl_4$로 표면처리한 막전극의 광전류는 처리하지 않았을 때 보다 평균 2배가량 증가한 $4.0mA/cm^2$ 정도를 나타내었다. 수소발생량도 $2.4{\times}10^4mol/hr$ 정도로서 처리하지 않았을 때 보다 크게 증가하였다.

• 공업화학
• /
• 제33권1호
• /
• pp.58-63
• /
• 2022

흑연은 낮은 탈/리튬화 전압, 372 mAh/g의 높은 이론 용량, 낮은 가격 및 긴 수명 특성을 가져 지난 30년 동안 리튬이 온전지 음극 재료로 활용되었다. 최근 무기 고체 재료로 구성되어 높은 안정성을 가지는 전고체 리튬이온전지는 전기자동차 및 차세대 에너지 저장 장치로 엄청난 주목을 받고 있지만, 전고체 리튬이온전지 시스템에 잘 구동되는 흑연 연구는 부족한 실정이다. 그래서 우리는 탄소재료 표면에 존재하여 저항층으로 작용하는 비정질 탄소를 흑연으로부터 제거하여 흑연의 전기전도도 향상을 통해 황화물계 전고체 전지 음극 흑연 재료의 성능 향상을 유도했다. 400, 500 및 600 ℃ 공기 열처리된 흑연의 X-ray diffraction (XRD) 분석 결과, (002) 피크 반치폭(FWHM)이 bare 흑연보다 줄어들어 열처리 후 흑연의 결정성이 향상됨을 보였다. 또한 열처리 후 흑연의 결정성이 증가할수록 방전 용량, 초기 쿨롱효율(ICE) 및 수명 특성이 증가함을 확인했다. 500 ℃ 공기 열처리 한 흑연의 경우 331.1 mAh/g 및 ICE 86.2%와 10사이클 수명 측정 후 92.7%의 높은 용량 유지율을 나타내었다.