• 제목/요약/키워드: Suction mechanism

검색결과 83건 처리시간 0.022초

Uplift Capacity of a Plate Anchor Considering Suction Effects

  • 서영교
    • 한국해양공학회지
    • /
    • 제22권6호
    • /
    • pp.1-6
    • /
    • 2008
  • Anchors have been commonly used to as foundation systems of the structures that require the uplift resistance. Recently anchors have been used in ocean sediment for mooring systems to stabilizeoffshore structures. In the saturated clayey soil however suction developed between the soil and andchor and affects the uplift capacity of anchor. To estimate the uplift capacity of the andchor accurately, the failure mechanisms of the andchor by the uplift force should also be correctly assumed. The uplift capacity is usually expressed in terms of breakout factors with respect to embedment ratio. In this paper, a two-dimensional plane strain numerical investigation into the vertical uplift capacity of a plate andchor in a clayey soil is described. The breakout factor against their corresponding values of embedment ratio was calculated and plotted along a single curve. The modes of failure mechanism at shallow and deep andchors are also presented.

A model of roof-top surface pressures produced by conical vortices : Model development

  • Banks, D.;Meroney, R.N.
    • Wind and Structures
    • /
    • 제4권3호
    • /
    • pp.227-246
    • /
    • 2001
  • The objective of this study is to understand the flow above the front edge of low-rise building roofs. The greatest suction on the building is known to occur at this location as a result of the formation of conical vortices in the separated flow zone. It is expected that the relationship between this suction and upstream flow conditions can be better understood through the analysis of the vortex flow mechanism. Experimental measurements were used, along with predictions from numerical simulations of delta wing vortex flows, to develop a model of the pressure field within and beneath the conical vortex. The model accounts for the change in vortex suction with wind angle, and includes a parameter indicating the strength of the vortex. The model can be applied to both mean and time dependent surface pressures, and is validated in a companion paper.

냉장고용 왕복동식 압축기의 소음특성에 관한 실험적 연구 (An Experimental Study on the Acoustic Characteristics of a Reciprocal Compressor)

  • 박철희;차용웅;홍성철;주재만;김영헌;박윤서
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
    • /
    • pp.196-201
    • /
    • 1997
  • In point of noise and vibration, it is easy to occur a noise and vibration, because the reciprocal compressor is composed of crank shaft, rod piston and etc. Therefore, it is important to understand the mechanism of reciprocal compressor. In this study, we measured the sound pressure level of compressor. There are two dominent frequencies. The first of one results from the suction part. In suction process, the suction valve flutteres, and it produces the noise of the first frequency. The other results from the structural vibration of the shell resonated by discharge pipe. Thus, to reduce the noise of compressor, it will be most efficiency to redesign muffler for the first frequency and discharge pipe for the second frequency.

  • PDF

Nylon Net(대체근계)의 토질강도보강효과에 대한 실험적 연구 - 토양수분제어하의 단순전단시험에 의한 해석 - (Experimental Study on Reinforcement Effects of Soil Shear Strength by Nylon Net(Substitute Materials Simulating a Root System) -Analysis using Simple Shear Tester under Soil Suction Control -)

  • 이창우;윤호중;정용호
    • 한국환경복원기술학회지
    • /
    • 제9권3호
    • /
    • pp.76-81
    • /
    • 2006
  • The reinforcement of soil shear strength by nylon net as substitute materials simulating a fine root system was evaluated by soil strength parameters(apparent cohesion(c) and internal friction angle(tan${\phi}$), using simple shear tester which clearly depicts shear deformation and controls soil suction. And the results of shear test by using bamboo as a substitute materials simulating a main root system and using nylon net as a substitute materials simulating a fine root system were compared. The reinforcement of soil strength by nylon net are expressed by apparent cohesion more than internal friction angle. In addition the increment of apparent cohesion by nylon net reached a peak in suction 60 $cmH_2O$. Different from with bamboo, the possibility of the change on internal friction angle(tan${\phi}$) caused by the soil water condition was shown in shear strain 20% condition. These results show that the mechanism of reinforcement by substitute materials simulating root system may be different in the condition of various soil water content.

완전 무치악 환자들을 위한 보철 수복 시 흡착 의치를 이용한 비교 분석 증례 (Comparative analysis of case series for the prosthetic rehabilitation of edentulous patients using suction denture)

  • 김예지;송영균
    • 대한치과보철학회지
    • /
    • 제57권4호
    • /
    • pp.389-396
    • /
    • 2019
  • 심하게 흡수된 치조제에서 의치의 유지력을 얻기 어려운 경우, 의치가 불안정하게 되어 의치 사용이 어렵다. 흡착 의치는 의치상 변연부를 가동 점막으로 봉쇄하여 폐구 시에 의치상 내면에 생기는 음압 형성을 통해 더 높은 유지와 안정을 목표로 한다. 본 증례에서는 4명의 환자들이 의치가 헐겁다는 주소로 내원하였다. 의치의 유지력에 대한 높은 요구도를 반영하여 흡착 의치의 개념을 이용하여 유지와 안정을 얻고자 하였다. 무치악 환자들에서 흡착의치를 이용한 보철 수복 시 고려할 사항들에 대하여 비교 분석하여 보고하고자 한다.

풍화토 사면에서 강우로 인한 간극수압 변화에 대한 실험연구 (In-situ Monitoring of Matric Suctions in a Weathered Soil Slope)

  • 이인모;조우성;김영욱;성상규
    • 한국지반공학회논문집
    • /
    • 제19권1호
    • /
    • pp.41-49
    • /
    • 2003
  • 우리나라에서 흔히 볼 수 있는 화강풍화토 사면에서 강우침투로 인한 사면파괴는 통상 지하수위 위쪽의 얕은 깊이에서 발생한다. 지하수위 위쪽 지반의 간극수압은 대기압에 대하여 음의 값을 갖는다. 이러한 모관흡수력의 존재와 크기는 사면의 안정성에 크게 기여하는 것으로 밝혀졌다. 따라서, 계절적 강우에 의한 풍화토 사면의 얕은 파괴기구(failure mechanism)를 규명하기 위해서는 비포화대에서의 모관흡수력 분포를 예측하는 것이 필수적이다. 이 연구에서는 2001년 6월부터 8월까지 화강풍화토 사면에서 모관흡수력 및 체적함수비를 현장 모니터링 하였으며, 대상지반에 대한 투수해석을 수행하였다. 현장 모니터링 결과, 기후조건의 영향력은 깊이에 따라 감소하는 경향을 보였으며 강우침투에 의한 지반내 모관흡수력의 감소는 강우량 및 강우지속시간 뿐만 아니라 강우직전의 모관흡수력 분포에도 큰 영향을 받고 있는 것으로 나타났다. 모니터링된 모관흡수력과 체적함수비를 이용하여 현장 흙-수분특성을 얻을 수 있었는데 습윤경로(wetting path)에 가까운 분포를 보였다.

지각 내 열수 재분배와 금광상 형성의 구조적 제어: 석션 펌프 및 단층 밸브 모델에 대한 리뷰 (Structural Controls on Crustal Fluid Redistribution and Hydrothermal Gold Deposits: A Review on the Suction Pump and Fault Valve Models)

  • 곽유정;박승익;박창윤
    • 자원환경지질
    • /
    • 제55권2호
    • /
    • pp.183-195
    • /
    • 2022
  • 열수 금광상은 단층대 내에서 일어나는 열수 유체의 폭발적 흐름의 증거이며, 그로 인해 만들어지는 맥의 구조 및 조직은 열수유체 재분배 기작을 반영한다. 본 리뷰 논문에서는 열수 금광상의 형성을 야기하는 지각 내 유체 순환의 기작으로서 석션 펌프와 단층 밸브 모델을 소개하고 단층역학적인 측면에서 검토한다. 석션 펌프와 단층 밸브 모델은 (1) 지구조 응력의 누적과 유체압의 증가, (2) 지진성 단층파열에 따른 지구조 응력의 해소와 유체압의 감소가 주기적으로 발생됨에 따라 단층을 통해 불균질하게 발생하는 유체의 이동 및 맥의 형성 기작이다. 두 기작들이 작동하는 지질학적 환경과 응력 조건은 서로 상이하며, 결과적으로 형성된 맥의 구조 및 조직적 특성은 서로 공통점과 차이점을 가진다. 석션 펌프와 단층 밸브 모델은 향후 한국의 열수 금광상의 구조적 성인을 정교하게 해석하고 추가적인 탐사의 효율성을 제고하는데 유용하게 활용될 수 있을 것으로 판단된다.

Biofunctional Prosthetic System(BPS) 를 이용한 심미 총의치 제작 (Esthetic complete denture fabrication utilizing Biofunctional Prosthetic System (BPS))

  • 노관태
    • 대한심미치과학회지
    • /
    • 제24권1호
    • /
    • pp.68-74
    • /
    • 2015
  • 최근 건강한 고령 무치악자가 증가하면서 높은 기능과 심미성을 갖춘 의치에 대한 요구가 증가하고 있다. BPS(Biofunctional Prosthetic System)는 현재 미국, 일본의 많은 학교에서 교육과정에 도입하고 있으며, 각 단계가 표준화, 시스템화 되어있어 의치제작 경험이 비교적 적은 술자도 만족도 높은 의치를 제작할 수 있는 시스템이다. 또한 이 BPS의 치 제작법에 하악 총의치의 흡착 메커니즘을 융합하면 기능시 안정된 하악의치를 제작할 수 있다. 본고에서는 BPS와 하악총의치 흡착 인상법을 이용하여 기능시 안정되고 심미성이 뛰어난 의치를 제작하는 과정을 기술하고자 한다.