• 한국표면공학회지
• /
• 제22권2호
• /
• pp.101-108
• /
• 1989

Effects of Na+ ion on zeta potential of SiC and Al2O3 particles suspended in nikel sufate and nickel chloride solutions were investigated. various complexing agents for Ni2+ ion were added to electroless Ni composite bath and the effects of the complexing agents on zeta potential and codeposition of the particles from the baths were studied. It was confirmed that Na+ ion was absorbed on the particles bringing about the positive surface charge and thus they promoted the entrapment of the particles into the nickel deposit. On the basis of these results it was possible to deposit SiCc particle in nickel chloride electrolyte containing complex agent such as trisodium citrate+sodium succinate.

• 한국세라믹학회지
• /
• 제24권4호
• /
• pp.343-348
• /
• 1987

The effects of salts such as aluminum sulfate as inorganic salt(2-4%), and sodium salts of citrate, tartrate, succinate, potassium tartrate and gelatin as organic salts(0.1%) on the formation of ${\alpha}$-calcium sulfate hemihydrate from by-product gypsum of phosphoric acid process under hydrothermal condition at 123$^{\circ}C$ and 133$^{\circ}C$ were investigated. Aluminum sulfate solution exhibited the catalystic effected on the crystallization of ${\alpha}$-calcium sulfate hemihydrate of which was assumed in the prismatic form, and organic salts solution exhibited little effect on the catalystic action to the crystallization, than inorganic salts. In the acidic solution with sulfuric acid(pH=2), needle like crystal of calcium sulfate hemihydrate was obtained. Hydrothermal process with aluminum sulfate solution also showed certain amounts of impurity removal such as phosphorus penataoxide from calcium sulfate hemihydrate.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.157-160
• /
• 2003

ALA is an intermediate in the tetrapyrrole biosynthesis pathway and has extensive applications as a biodegradable herbicide and insecticide as well as medical applications including photodynamic therapy of cancers. For the development of mass production process of ALA it is necessary to on-line monitor some metabolites such as glycine, succinate, LA and ALA. In this study, medium compositions and fermentation conditions were investigated for enhancement of ALA production by recombinant E. coli. A 2-dimensional fluorescence sensor was employed to monitor the bioprocess of ALA production. The monitored data is analyzed using principal component analysis, a powerful tool for multivariate statistical analysis.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.87-90
• /
• 2003

ALA is an essential intermediate in the tetrapyrrole biosynthesis pathway and has applications as a biodegradable herbicide and insecticide as well as medical applications including photodynamic therapy of cancers. For the development of mass production process of ALA it is necessary to on-line monitor some metabolites such as glycine, succinate, LA and ALA. In this work, medium compositions, pH conditions, induction and addition of LA were investigated to increase the production of ALA by recombinant E. coli. A 2-dimensional fluorescence sensor was used to monitor the processe and the fluorescence spectra were correlated with on- and off-line data like ALAS, ALAD, cell mass etc.

• BMB Reports
• /
• 제35권5호
• /
• pp.443-451
• /
• 2002

Malonate is a three-carbon dicarboxylic acid. It is well known as a competitive inhibitor of succinate dehydrogenase. It occurs naturally in biological systems, such as legumes and developing rat brains, which indicates that it may play an important role in symbiotic nitrogen metabolism and brain development. Recently, enzymes that are related to malonate metabolism were discovered and characterized. The genes that encode the enzymes were isolated, and the regulation of their expression was also studied. The mutant bacteria, in which the malonate-metabolizing gene was deleted, lost its primary function, symbiosis, between Rhizobium leguminosarium bv trifolii and clover. This suggests that malonate metabolism is essential in symbiotic nitrogen metabolism, at least in clover nodules. In addition to these, the genes matB and matC have been successfully used for generation of the industrial strain of Streptomyces for the production of antibiotics.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.455-463
• /
• 1996

Aluminium nitride (AlN) powder was prepared by using aluminium (III) complexes with dibasic carboxylate ligands(adipato)(hydroxo) aluminium(III) and (hydroxo)(succinato)aluminium (III) as a precursor. The AlN pow-der was obtained by calcining the complexes without mixing any carbon source under a flow of ammonia at 120$0^{\circ}C$ Contary to the conventional carbothermal reduction and nitridiation the process of decarboniza-tion of the residual carbon was not required because of the reaction of ammonia with carbon at temperature >100$0^{\circ}C$. Fine AlN powder was also prepared by calcining a mixture of an (adipato)(hydroxo)aluminium(III) complex and carbon under a flow of nitrogen at 140$0^{\circ}C$ The AlN powders prepared were ultrafine and their morphology was almost the same as that of powders of two precursors.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1986년도 추계학술대회
• /
• pp.527.3-527
• /
• 1986

Several factors predicted to affect the protoplast formation and regeneration were investigated. The optimum lysozyme, casamino acid and PVP concentration were 0.5 (mg/$m\ell$), 0.1 (%) and 1.5(%). In B. pumilus, Penicillin-G treatment concentration was 0.3 (U/$m\ell$) and optimum treatment period was transit log. phase. And in the case of Celm. fimi, 0.3 (U/$m\ell$) and initial log. phase. Osmotic stabilizer and di-cation for OSM medium of B.pumilus and Gelm .fimi were 25mM CaCl2, 0.5M sodium sucinate and 50mM MgCl$_2$, 100mM CaCl$_2$, 0.4M sodium succinate. The regeneration frequency of B.pumilus and Celm. fimi were 14.6(%) and 6.9(%).

• 한국미생물·생명공학회지
• /
• 제23권6호
• /
• pp.647-651
• /
• 1995

A tylosin-hyperproductive mutant of S. fradiae MNU20 was isolated among 3500 strains obtaincd from either MNNG- or UV-treated Streptomyces fradiae NRRL2702. The composition of optimal medium for tylosin production was formulated as followed as: 4 g soluble starch, 1 g glucose, 1 g corn steep liquor, 7.5 ml soy bean oil, 0.2 g KH$_{2}$PO$_{4}$, 1 g Na$_{2}$S$_{2}$O$_{3}$$\cdot $5H$_{2}$O, 2 g CaCO$_{3}$, 2 g NaCl, 0.001 g CoCl$_{2}$$\cdot $6H$_{2}$O in 1 liter of distilled water. With the optimal medium, S. fradiae MNU20 was able to produce 159 mg tylosin (g biomass)$^{-1}$, indicating that tylosin productivity of Streptomyces fradiae NRRL2702 was increased 14 times higher by mutation. When the effect of valine, succinate, and natural zeolite on tylosin production was investigated by using the optimal medium, these substances essentially enhanced tylosin production and their addition time during culture period appeared to be critical for the increase of tylosin production.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.297-300
• /
• 2000

Succinic acid was produced by Enterococcus faecalis RKY1 cells immobilized in hollow fiber bioreactor as an alternatively immobilized culture in bioconversion of fumaric acid to succinic acid. The feed was pumped through the shell side. As the flow rate of the feed was increased, the steady state was obtained more quickly. The steady state was reached after 24 hr cultivation in 0.25 ml/min, 12 hr in 0.5 ml/min, and 9 hr in 1.0 ml/min, respectively. The effect of medium pH on succinate production was also investigated. By changing the medium pH of 8.0, the succinic acid produced was increased about 16% than that of pH 7.0.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.88-91
• /
• 2004

In this study, a number of natural fiber henequen reinforced polymer matrix composites were successfully fabricated by means of a compression molding technique using chopped henequen fibers surface-treated with different electron beam irradiation (EBI) dosages, thermoplastic poly(butylene succinate), thermosetting unsaturated polyester and phenolic resins. Their interfacial and thermal characteristics were studied in terms of interfacial shear strength, fracture surface, dynamic mechanical properties, dimensional stability, and thermal stability using single fiber microbonding test, SEM, DMA, TMA, and TGA. The results show that their interfacial and thermal properties significantly depend on the intensity of EBl treatment on the natural fiber surface.