• 컴퓨터교육학회논문지
• /
• 제15권6호
• /
• pp.11-20
• /
• 2012

교육분야에서 창의와 융합에 대한 관심이 높아지면서 통합교육에 대한 많은 연구들이 수행되고 있다. 기존의 선행연구들은 통합교육 모형, 교육내용 개발과 관련된 연구가 대부분이고 수업설계와 관련된 연구는 미흡하다. 본 연구에서는 교사들의 통합교육 수업설계를 안내하기 위한 통합교육 프레임워크를 개발하였다. 이를 위해 성공적으로 통합교육을 실시한 사례를 분석하였다. 분석결과 통합교육의 세 가지 교과의 수업 유형과 네 가지 교사의 수업 참여 유형의 관계와 특징을 파악하였다. 이를 토대로 수업에 중심을 둔 네 단계의 통합교육 프레임워크를 제안하고, 각 단계별 주요 고려사항을 제시하였다.

• 센서학회지
• /
• 제22권5호
• /
• pp.364-368
• /
• 2013

Vibrational energy harvester based on piezoelectricity has been expected to be the dominant energy harvesting technology due to the advantages of high conversion efficiency, light weight and small size, night operation, etc. Its commercialization is just around the corner but the integration with power management electronics should be solved in advance. In this paper, therefore, fully-integrated design environment for piezoelectric energy harvesting systems is presented to assist co-design with the power management electronics. The proposed design environment is capable of analyzing the energy harvester including the package-induced damping effects and simulating the device and its power management electronics simultaneously. When the developed design environment was applied to the fabricated device, the simulated resonant frequency matched well with the experimental result with a difference of 2.97% only. Also, the complex transient response was completed in short simulation time of 3,001 seconds including the displacement distribution over the device geometry. Furthermore, a full-bridge power management circuit was modeled and simulated with the energy harvester simultaneously. Therefore the proposed, fully-integrated design environment is accurate and fast enough for the contribution on successful commercialization of piezoelectric energy harvester.

• The Korean Journal of Pain
• /
• 제18권1호
• /
• pp.34-38
• /
• 2005

Background: Over the years, disc surgery has progressively evolved in the direction of decreasing trauma and its invasiveness. Conventional open surgery has many complications, such as scarring, instability, bleeding and a relative high mortality rate. Minimally invasive spinal surgery is now an alternative to a traditional discectomy. Herein, we present an operative technique, and the early results, for a percutaneous endoscopic lumbar discectomy in herniated lumbar disc disease. Methods: 43 patients, including 27 men and 16 women, with ages ranging from 18 to 66 years, were enrolled in this study. All the patients showed a protruded or extruded soft disc herniation at the lumbar level on magnetic resonance imaging and computed tomography. A percutaneous endoscopic lumbar discectomy was applied to the patients, and clinical responses evaluated using MacNab's criteria. Results: 40 patients were regarded as showing successful responses (93.1%), and there were no severe complications, such as a hematoma, nerve injury, postoperative dysesthesia or death. One patient underwent fusion surgery for remnant back pain six month later. Conclusions: We conclude that, in properly selected patients, a percutaneous endoscopic lumbar discectomy is a safe, noninvasive and effective treatment modality for herniated lumbar intervertebral disc disease.

• Biodesign
• /
• 제5권4호
• /
• pp.136-140
• /
• 2017

Lam6 is a member of sterol-specific ${\underline{l}ipid$ transfer proteins ${\underline{a}}nchored$ at ${\underline{m}ebrane$ contact sites (LAMs). Lam6 localizes to the ER-mitochondria contact sites by its PH-like domain and the C-terminal transmembrane helix. Here, we purified and crystallized the Lam6 PH-like domain from Saccharomyces cerevisiae. To aid crystallization of the Lam6 PH-like domain, T4 lysozyme was fused to the N-terminus of the Lam6 PH-like domain with a short dipeptide linker, GlySer. The fusion protein was crystallized under the condition of 0.1 M HEPES-HCl pH 7.0, 10% (w/v) PEG 8000, and 0.1 M $Na_3$ Citrate at 293K. X-ray diffraction data of the crystals were collected to $2.4{\AA}$ resolution using synchrotron radiation. The crystals belong to the orthorhombic space group $P2_12_12_1$ with unit cell parameters $a=59.5{\AA}$, $b=60.1{\AA}$, and $c=105.6{\AA}$. The asymmetric unit contains one T4L-Lam6 molecule with a solvent content of 58.7%. The initial attempt to solve the structure by molecular replacement using the T4 lysozyme structure was successful.

• 한국분말재료학회지
• /
• 제26권4호
• /
• pp.319-326
• /
• 2019

Additive manufacturing (AM) is a highly innovative method for joining dissimilar materials for industrial applications. In the present work, AM of STS630 and Ti-6Al-4V powder alloys on medium entropy alloys (MEAs) NiCrCo and NiCrCoMn is studied. The STS630 and Ti64 powders are deposited on the MEAs. Joint delamination and cracks are observed after the deposition of Ti64 on the MEAs, whereas the deposition of STS630 on the MEAs is successful, without any cracks and joint delamination. The microstructure around the fusion zone interface is characterized by scanning electron microscopy and X-ray diffraction. Intermetallic compounds are formed at the interfacial regions of MEA-Ti64 samples. In addition, Vicker's hardness value increased dramatically at the joint interface between MEAs and Ti-6Al-4V compared to that between MEAs and STS630. This result is attributed to the brittle nature of the joint, which can lead to a decrease in the joint strength.

• Journal of Microbiology and Biotechnology
• /
• 제29권5호
• /
• pp.749-757
• /
• 2019

Nitrilase is a valuable hydrolase that catalyzes nitriles into carboxylic acid and ammonia. Its applications, however, are severely restricted by the harsh conditions of industrial reaction processes. To solve this problem, a nitrilase from Acidovorax facilis 72W was inserted into an Escherichia coli-Bacillus subtilis shuttle vector for spore surface display. Western blot, enzyme activity measurements and flow cytometric analysis results all indicated a successful spore surface display of the CotB-nit fusion protein. In addition, the optimal catalytic pH value and temperature of the displayed nitrilase were determined to be 7.0 and $50^{\circ}C$, respectively. Moreover, results of reusability tests revealed that 64% of the initial activity of the displayed nitrilase was still retained at the $10^{th}$ cycle. Furthermore, hydrolysis efficiency of upscale production of cyanocarboxylic acid was significantly higher in the displayed nitrilase-treated group than in the free group expressed by E. coli (pET-28a-nit). Generally, the display of A. facilis 72W nitrilase on the spore surface of Bacillus subtilis may be a useful method for immobilization of enzyme and consequent biocatalytic stabilization.

• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.153-158
• /
• 2023

Most agriculture plantings are based on traditional farming and demand a lot of human work processes. In order to improve the efficiency as well as the productivity of their farms, modern agricultural technology was proven to be better than traditional practices. Internet of Things (IoT) is usually related in modern agriculture which provides the farmer with a real-time monitoring condition of their farm from anywhere and anytime. Therefore, the application of IoT with a sensor to measure and monitors the humidity and the temperature in the mushroom farm that can overcome this problem. This paper proposes an IoT based monitoring system forindoor Ganoderma lucidum cultivation at a minimal cost in terms of hardware resources and practicality. The results show that the data of temperature and humidity are changing depending on the weather and the preliminary experimental results demonstrated that all parameters of the system were optimized and successful to achieve the objective. In addition, the analysis results show that the quality of Ganoderma lucidum produced on the research method conforms to regulations in Vietnam.

• 대한족부족관절학회지
• /
• 제28권3호
• /
• pp.107-110
• /
• 2024

Neuropathic arthropathy (Charcot arthropathy) is a progressive joint disease often associated with conditions such as diabetes, leading to severe joint deformity and pain. However, its occurrence in patients with rheumatoid arthritis (RA) is rare and not well documented. This case report describes a 48-year-old woman with a long history of RA who developed a severe deformity of her right ankle, identified as neuropathic arthropathy extending to the subtalar joint (Brodsky classification type 3A). After excluding other potential causes, the condition was determined to be secondary to RA-associated peripheral neuropathy. Surgery, including allograft and autograft fixation, was performed to correct the deformity. Post-operative complications, such as wound infection, were treated with negative pressure wound therapy and skin grafting. At the 18-month follow-up, the patient was able to walk without pain, demonstrating successful joint fusion.

• 한국가축번식학회지
• /
• 제21권3호
• /
• pp.293-302
• /
• 1997

Follicular oocytes of Grade I and II were collected from 2~6 mm ovarian follicles and matured in vitro (IVM) for 24 hrs in TCM-199 su, pp.emented with 35$\mu\textrm{g}$/ml FSH, 10$\mu\textrm{g}$/ml LH, and 1$\mu\textrm{g}$/ml estradiol-17$\beta$ at 39$^{\circ}C$ under 5% CO2 in air. They were fretilized in vitro (IVF) by epididymal spermatozoa capacitated with heparin for 12 hrs. The zygotes were then co-cultured in vitro with bovine oviducted epithelial cells (BOEC) for 7 to 9 days. The optimal time for IVM, the successful enucleation of IVM oocytes by micromanipulation at different oocyte ages after IVM, and the ideal culture system for IVM for effective IVF and in vitro development of IVM-IVF embryos was examined for in vitro production of nuclear recipient oocytes and nuclear donor embryos. To improve the efficiency of nuclear transplantation (NT) of IVF embryo into IVM follicular oocytes, this study evaluated the optimal electric condition and oocytes age for activation of IVM oocytes and in vitro development of NT embryos. In vitro development of NT embryos with preactivation or non-preactivation in enucleation oocytes, cell number of IVN-IVF embryos, and NT embryos wre also examined. The results obtained were as follows; 1. The most suitable enucleation time was at 24 hpm (83.3%) rather than that of 28 hpm(69.6%) and 32 hpm(50.0%). 2. There was no difference among the fusion rates of NT embryos at the voltages of 0.75, 1.0 and 1.5 kV/cm, but the in vitro development rates to morule and blastocyst were significantly (P<0.05) higher at the voltage of 0.75(12.5%) and 1.0kV/cm (12.6%) compared to 1.5kV/cm(0%). 3. No significant difference in activation rates were seen in NT embryos stimulated for 30, 60 and 120 $\mu$sec (71.7, 85.2 and 71.9%, respectively), but the in vitro development rates to morulae and blastocyst were significantly (P<0.05) higher in the oocytes stimulated for 30 $\mu$sec (11.6%) and 60 $\mu$sec(10.7%) than 120 $\mu$sec(0.0%). 4. The fusion rates (71.0 and 87.3%) and the in vitro development rates (9.1 and 12.7%) to morula and blastocyst were seen in the NT embryos stimulated at 28 and 32 hpm under the condition of 1.0 kV/ml, 60 $\mu$sec. However, at 24 hpm the fusion rates were 64.8% and the in vitro development to morula and blastocyst were not seen. 5. The fusion rates between the 8~12, 13~17 and 18~22-cell stage of IVM-IVF embryos were not significantly different. The in vitro development rates of the fused embryos to morula and blastocyst which were received from a blastomere of 8~12, 13~17 and 18~22-cell stages of IVM-IVF embryos were 14.9, 8.3 and 6.5%, respectively. 6. The in vitro development rate of the enucleated recipient oocytes with preactivation (24.2%) to morula and blastocyst was significantly (P<0.05) higher than that of non-preactivation (12.8%). 7. The cell numbers of NT blastocyst and IVM-IVF blastocyst cultured during 7~9 days were 63$\pm$11 and 119$\pm$23, and then their the mean cell cycle number were 5.98 and 6.89, respectively.

• 만화애니메이션 연구
• /
• 통권36호
• /
• pp.237-257
• /
• 2014

본 연구는 다분야간의 학제적 융합연구를 진행하는 과정으로 뇌기반 학습 원리와 이미지 창작의 뇌과학적 기제를 고려한 예술교육의 선행 연구현황을 알아보는 과정이다. 최근에 이르러 각 분야의 교육방법을 타 분야와의 웅합적 연구 활동으로 생산해 내는 것이 트렌드로 부상하고 있고, 이에 힘입어 뇌기반 교육 융합연구의 결과들이 각 분야마다 발표되고 있다. 음악, 미술, 무용과 같은 예술 분야 또한 해당된다. 즉, 창작과 학습이 이루어지는 동안 뇌의 작동원리를 이해하고 해당 기능을 발달시킬 수 있는 여러 원리를 교수법으로 적용하면 예술적 수행 능력과 창의성이 효율적으로 신장된다는 관점이다. 애니메이션 드로잉은 단순히 사물을 똑같이 그리는 소묘적 관점에서 벗어나 움직임의 요소를 직감적으로 인식하고 대상과의 소통을 통해 연출할 수 있어야 하기에 형태구현의 인지적 관점 뿐만 아니라 고차원적 인지감각의 요소, 소통의 방법까지를 포함한 체계적인 교육방법을 개발할 필요성이 요구된다. 이에 본 연구는 애니메이션 드로잉의 전문적인 특성을 고려한 교육모형을 설계하기 위해 뇌기반 원리를 적용한 예술교육에 대한 문헌 연구결과를 제시한다. 이에 뇌기반 예술교육의 적용사례를 해외의 흐름과 국내의 흐름을 추출 분석하였다. 또한 뇌기반 원리를 적용한 미술교육연구의 사례와 드로잉관련 교육의 사례의 연구결과를 분석하였다. 분석된 결과에 따르면 드로잉관련 뇌기반 학습은 우뇌 트레이닝을 통한 관찰력과 집중력, 이미지표현과 관계된 창의력, 긍정정서의 변화에 증진 효과를 공통적으로 드러났다. 그 외에도 뇌파훈련을 통한 해외의 학습적용 사례가 있었는데 타이밍능력과 예술표현력은 HRV 훈련과 SMR, 베타1, 알파/세타파를 강화하는 뉴로피드백 훈련으로 증진 효과를 보았으며, 느린 뇌파 뉴로피드백 훈련이 스트레스를 극복하고 창의적 미술 수행능력을 향상시키는데 큰 기여를 하고 있음을 제시하고 있다. 이 연구결과가 의미하는 것은 뉴로피드백 훈련이 실험실 범위를 벗어난 예술적 실교육의 환경에서도 성공적으로 적용될 수 있다는 것을 보여준 사례라는 점에서 의미가 크지만 기계를 사용해야하는 것은 교수법으로 적용하기엔 한계가 있음이 드러남으로 인해 추후 애니메이션 드로잉 교육법에 뇌기반 학습원리를 적용, 설계하기위한 분석적 토대를 마련하기에 의의가 있다 하겠다.