• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2911-2914
• /
• 2003

Conventionally, biological manipulations have been performed manually with long training and pretty low success rates. To overcome this problem, a novel biological manipulation system has been developed to manipulate biological cells without any interference of a human operator, In this paper, we demonstrate a development of tole-autonomous Cell Manipulation System (CMS) using an image processing at a remote site. The CMS consists of two manipulators, a plane stage, and an optical microscope. We developed deformable template-model-matching algorithm for micro objects and pattern matching algorithm of end effect for these manipulators in order to control manipulators and the stage. Through manipulation of biological cells using these algorithms, the performance of the CMS is verified experimentally.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권4호
• /
• pp.208-212
• /
• 2014

An experimental gear-box was set-up to simulate the real situation of the wind-turbine. Artificial cracks of different sizes were machined into the gear. Vibration signals were acquired to diagnose the different crack fault conditions. Time-domain features such as root mean square, variance, kurtosis, normalized 6th central moments were used to capture the characteristics of different crack conditions. Normal condition, 1 mm crack condition, 2mm crack condition, 6mm crack condition, and tooth fault condition were compared using ANFIS and DAG-SVM methods, and three different DAG-SVM models were compared. High-pass filtering improved the success rates remarkably in the case of DAG-SVM.

• 품질경영학회지
• /
• 제25권3호
• /
• pp.108-118
• /
• 1997

A commercial nuclear power station contains at least two emergency diesel generates(EDG) to control the risk of severe core demage during the station blackout accidents. Therefore the reliability of the EDG's to start and load-run on demend must be maintained at a sufficiently high level. Until now, a simple assessment of start and load-run success rates was used to calculate the EDG's reliability. However, this method has been found to contain many defects. Recently, the work of Martz et al.(1996) proposed the use of the Bayes estimator to find the EDG's reliability. In this paper, we will propose confidence interval for the Bayes estimator, compare the above two methods and, using practical examples, illustrate why the Bayes estimator method is more reasonable in our situation.

• 품질경영학회지
• /
• 제26권4호
• /
• pp.265-276
• /
• 1998

A commercial nuclear power station contains at least two emergency diesel generators(EDG) to control the risk of severe core damage during station blackout accidnets. Therefore, thereliability of the EDG's to start and load-run on demand must be maintained at a sufficiently high level. Until now, a simple assessment of start and load-run success rates was used to calculate the EDG reliability. However, this method has been found to contain many defects. Recently, the work of Martz et al.(1996) proposed the use of the Bayes estimator to find EDG reliability. Shim(1996) proposed a confidence interval for the Bayes estimator, compare the above two methods. In this paper, we introduce the notion of "Composite Reliablility" to estimate the reliability of nuclear-power plant EDG, and using practical examples, illustrate which method is more a, pp.opriate in our situation.situation.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.108-116
• /
• 2000

Undesired trouble such as chatter vibration and burning on the ground surface appears frequently in the cylindrical plunge grinding process. Establishment of a credible fault diagnostic system for the grinding process is the major purpose of this study. Power signals generated during the grinding operation were sampled and analyzed to determine the relationship between grinding troubles and behavior of signal changes. In addition, a neural network was optimized with a momentum coefficient a learning rate, and a structure of the hidden layer through the iterative learning process. Based on the established system, success rates of the trouble recognition were verified.

• 대한산업공학회지
• /
• 제39권5호
• /
• pp.412-421
• /
• 2013

Motion picture industry is one of the most representative fields in the cultural industry and has experienced constant growth both worldwide and within domestic markets. However, little research has been undertaken for diffusion patterns of motion pictures, whereas various issues such as demand forecasting and success factor analysis have been widely explored. To analyze diffusion patterns, we adopted extended Bass model to reflect the potential demand of movies. Four clusters of selected movies were derived by k-means clustering method with criteria of opening strength and profitability and then compared by their diffusion patterns. Results indicated that movies with high profitability and medium opening strength are most significantly influenced by word of mouth effect, while low profitability movies display nearly monotonic decreasing diffusion patterns with noticeable initial adoption rates and relatively early peak points in their runs.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.316-317
• /
• 1997

For successful endodontic therapy, complete and accurate biochemical and chemical preparations will allow accurate root canal. Hence the accurate determination of root length is very important for the highest rates of success in endodontic therapy. Among the apex locators, frequency dependent type has higher accuracy and more advantages than others. In this paper, we proposed better frequencies for the method of measuring root canal length by the ratio of two different impedances. It was found that 500Hz and 10kHz is better selection than other frequencies used in the commercial products.

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1110-1116
• /
• 2008

In this paper, we suggest GP operators based on tree structure considering tree distributions in structure space and structural difficulties. The main idea of the proposed genetic operators is to place generated offspring into the specific region which nodes and depths are balanced and most of solutions exist. To enable that, the proposed operators are designed to utilize region information where parents belong and node/depth rates of selected subtree. To demonstrate the effectiveness of our proposed approach, experiments of binomial-3 regression, multiplexer and even parity problem are executed. The experiments results show that the proposed operators based on tree structure is superior to the results of standard GP for all three test problems in both success rate and number of evaluations.

• Clinical and Experimental Reproductive Medicine
• /
• 제15권1호
• /
• pp.1-9
• /
• 1988

The contraception practice rate in Korea has steadily increased from 9% in 1964 to 72% in 1987. Accordingly, natural increase rate of population declined from 28.4 per 1,000 in 1964 to 12.4 per 1,000 in 1987. Notably in recent years, the acceptance of surgical contraception services has sharply increased in this country. Now the author analyzes various factors influencing successful vasectomy and vasovasostomy based on his experience in performing more than 8,000 vasectomies and 1,000 vasovasostomies during the past 25 years. These various factors consist of preoperative screening interview, surgical vasectomy technique, vas irrigation technique, open-ended vasectomy, complications from vasectomy, sperm granuloma formation, spermatogenesis and steroidogenesis after vasectomy, immunological consequences after vasectomy, prostatic diseases and vasectomy, late post-vasectomy syndrome, psychological effects after vasectomy, and success rates of vasovasostomy. Besides, the author makes more comments on the results of the clinical trials on new approaches to reversible vas occlusion technique with a new device of Intravasal Thread and to reversible suppression of spermatogenesis with long-acting sex hormones.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1802-1819
• /
• 2017

Correlation-enhanced collision attack has been proposed by Moradi et al. for several years. However, in practical operations, this method costs lots of time on trace acquisition, storage and averaging due to its bytewise collision detection. In this paper, we propose a bitwise collision attack based on second-order distance model. In this method, only 9 average traces are enough to finish a collision attack. Furthermore, two candidate models are given in this study to distinguish collisions, and the corresponding practical experiments are also performed. The experimental results indicate that the operation time of our attack is only 8% of that of correlation-enhanced collision attack, when the two success rates are both above 0.9.