• 제목/요약/키워드: Subsurface deformation

검색결과 40건 처리시간 0.023초

물분위기에서의 인코넬 합금의 마멸기구 (Wear Mechanism of Inconel Alloys in Room Temperature Water)

  • 이영호;김인섭
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제34회 추계학술대회 개최
    • /
    • pp.103-108
    • /
    • 2001
  • Wear test has been performed to evaluate the wear mechanism of Inconel alloys against ferritic stainless steels in room temperature water. By means of scanning electron microscopy (SEM), the worn surface and microstructure of subsurface layer have been examined. The wear at steady state conditions result in the formation of 5∼7${\mu}$m thick layers with fragmented microstructure. The thickness of these layers seems to depend on the ability of work hardening and deformation accommodation at the contact areas during wear. Therefore, in room temperature water, the wear rate is closely related with the wear resistance of these fragment microstructure which are generated after severe subsurface deformation.

  • PDF

이축압축실험을 통한 지하공동 손상시 음향방출 및 미소변형 특성 연구 (A Study on Acoustic Emission and Micro Deformation Characteristics During Biaxial Compression Experiments of Underground Opening Damage)

  • 김민준;최준형;나태유;박찬;채병곤;박의섭
    • 터널과지하공간
    • /
    • 제34권2호
    • /
    • pp.169-184
    • /
    • 2024
  • 본 연구에서는 심부 지하공간의 안정성을 평가하고자 심부 응력조건을 반영한 암석블록의 이축압축실험을 통하여 지하공동에서 손상 발생시 발생하는 음향방출 및 미소변형의 특성을 분석하였다. 음향방출 특성 분석 결과 지하공동에서 손상 발생 직전에 음향방출 신호의 주파수, 카운트, 에너지, 진폭 특성이 급격히 증가하였다. 특히 주파수와 카운트는 손상 전후에서 특성 차이가 크게 나타나 원형 공동의 손상 특성 분석에 적합한 음향방출 인자인 것으로 나타났다. 이미지상관기법 적용결과 실험 중 공동 주변에 변형이 집중되었음을 변형률의 공간적 분포를 통해 알 수 있었으며, 실험 종료 지점에서는 스폴링 현상이 발생하였음을 확인할 수 있었다. 본 연구에서 제시된 원형 공동 손상시 음향방출 및 미소변형 특성은 심지층 활용을 위한 지하공동 안정성 평가의 기초자료로 활용될 것으로 기대된다.

접촉면에서의 변형특성이 마멸속도에 미치는 영향 (Effect of Deformation Properties at the Contact Surfaces on the Wear Rate)

  • 이영호;김인섭
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제33회 춘계학술대회 개최
    • /
    • pp.115-121
    • /
    • 2001
  • The wear test has been performed to evaluate the wear mechanism of steam generator (SG) tube materials against ferritic stainless steel in water environment. The wear rates of SG tube materials depend on the change of mechanical properties between contact surfaces during wear test. From the subsurface hardness test, Inconel 690 is more work-hardened than Inconel 600 even though these materials have similar hardness values before the wear test. Main cause is due to the difference of stacking fault energy with the chromium content. In water environment, wear mechanism is closely related with the continuous formation and fracture of deformation layers at the contact surfaces.

  • PDF

베어링-축 조립체에서 축의 셰이크다운에 관한 연구 (Shakedown Analysis of Shaft in Bearing-Shaft Assembly)

  • 박흥근;박진무;오윤찬
    • 대한기계학회논문집A
    • /
    • 제24권7호
    • /
    • pp.1740-1747
    • /
    • 2000
  • Under repeated rolling, initial plastic deformation introduces residual stresses which render the steady cyclic state purely elastic. This is called the process of shakedown. Many studies have been done about the shakedown in semi-infinite half space using calculated Hertizian pressure. In this paper shakedown processes in a shaft are studied by finite element analyses of a two dimensional(plane strain) model with elastic-linear-kinematic-hardening-plastic material subjected to repeated, frictionless rolling contact. Symmetric and non-symmetric pressure distributions are obtained using a simplified model of the bearing-shaft assembly. The rolling contact is simulated by repeatedly translating both pressure distributions along the surface of the shaft. By the influence of the non-symmetric pressure, larger residual radial tensile stress is generated in the immediate subsurface layer, which may make a crack propagate and, the subsurface undergoes a zigzag plastic deformation during the shakedown process, which may lead to a crack initiation.

파괴역학을 이용한 차륜과 레일의 마모에 관한 연구 (A Study on the Wear of Rail by Fracture Mechanics)

  • 구병춘
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
    • /
    • pp.315-322
    • /
    • 1998
  • A two dimensional elasto-plastic finite element program taking into account contact between crack surfaces if developed in order to analyze subsurface cracking in rolling contact. But the friction between upper and lower surface of the crack is not considered. Under the assumptions of small deformation and small displacement, the incremental theory of plasticity is used to describe plastic deformation. J-integral is computed as the applied Hertzian load slides over the surface with friction. J-integral is correlated with wear rate of the rail. The propagation rate of the right tip of the surface crack is fast by 45% than that of the left side.

  • PDF

터널모형실험을 통한 사질토 지반에서의 K값의 산정 (Determination of K values from tunnel model tests in sandy ground)

  • 이용주;류창열
    • 한국터널지하공간학회 논문집
    • /
    • 제12권1호
    • /
    • pp.87-94
    • /
    • 2010
  • 본 연구는 사질토 지반에서의 얕은 터널과 깊은 터널굴착으로 인해 발생하는 지중침하에 주안점을 두었다. 터널 굴착과정에서 일어나는 지반손실에 따른 이론적인 변형형태를 규명하기 위해 알루미늄 봉을 이용하는 실내모형실험과 CRISP프로그램을 사용하여 유한요소해석을 수행하였다. 모형실험 결과와 유한요소해석 결과를 비교 분석한 결과, 서로 유사한 변형형태를 가지는 것으로 나타났다. 또한, 지중침하곡선의 폭에 대한 계수인 K값은 Dyer등(1996)과 Moh 등(1996)의 현장측정 값 사이에 분포하는 것을 확인할 수 있었다. 터널모형실험 결과를 토대로 사질토 지반에서의 선형적인 K방정식을 얻을 수 있었다.

2차원 실내모형실험과 수치해석을 이용한 사질토 지반의 얕은 터널에 대한 지중변형에 대한 규명 (Investigation of Subsurface Deformations for the Shallow Tunnel In A Granular Mass Using Two-Dimensional Laboratory Model Test and Numerical Analysis)

  • 이용주
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.219-228
    • /
    • 2006
  • In urban areas, tunnelling induced ground deformations, particularly ground settlements should be considered in order to minimize the damage of adjacent structures. Therefore, an appropriate monitoring system for the tunnel construction should be setup at the planning or design stage. A number of studies on ground settlements due to tunnelling in soft ground have been carried out so far. However, most studies have focused on clay soil rather than sand soil. In particular, a few studies on behaviour of subsurface deformations in granular material have been reported. In this study, two-dimensional laboratory model test with aluminium rods regarded as continuum granular material and close range photogrammetric technique, and numerical analysis were carried out in order to identify the behaviour of subsurface deformations due to shallow tunnelling. Direction and magnitude of displacement vectors from the model test was identical to the numerical analysis. In particular, the vector direction was appeared to be toward a point below the tunnel invert level. A narrow 'chimney or tulip like' pattern of vertical displacement was confirmed by both the model test and numerical analysis. This is consistent with the field data. In addition to the qualitative comparison, the quantitative comparison of subsurface settlements according to 2D volume loss showed good agreement between the model test and numerical analysis. Therefore, close range photogrammetric technique applied in the model test may be used to validate the result from the continuum numerical analysis.

  • PDF

층이 있는 반무한체의 접촉하중에 의한 응력을 푸리에 적분을 이용한 해석 (Stress Analysis of a Layered Semi-infinite Solid Subjected to Contact Loading Using a Fourier Integral)

  • 안유민;박상신
    • Tribology and Lubricants
    • /
    • 제17권5호
    • /
    • pp.373-379
    • /
    • 2001
  • The problem of interest is formulating elastic contact problem of a layered semi-infinite solid in terms of Fourier integral. The plane strain problem is considered for a solid composed of homogeneous isotropic two layers with different mechanical properties. General solutions for the subsurface stress and deformation field of frictionless elastic bodies under normal loading using of Fourier transformation technique are obtained. The numerical results for the stress distribution of coated solid for some particular cases are given.

유리침윤 알루미나 및 스핀넬 복합체에 관한 연구 I. 미세구조 및 유리함량이 접촉손상 및 강동에 미치는 영향 (A Study on Glass-Infiltrated Alumina and Spinel Composite I. Effect of Microstructure and Glass Content on Contant Damage and Strength)

  • 정연길;최성철
    • 한국세라믹학회지
    • /
    • 제35권7호
    • /
    • pp.671-678
    • /
    • 1998
  • Hertzian indentation tests with sphere indenters were used to study the mechanical properties of glass-in-filtrated alumina and spinel composites and evaluated the effect of preform microstructure and evaluated the effect of preform microstructure and glass con-tents on contanct damage and strength. The spinel composite showed more brittle behavior than the alumina composite which is verified from indentation stress-strain curve cone cracks and quasi-plastic deformation developed at subsurface. Failure originated from either cone cracks(brittle mode) or deformation zone(quasi-plastic mode) above critical load for cracking(Pc) and yield ({{{{ {P }_{Y } }}) with the brittle mode more dominant in the spinels and the quasi-plastic mode more dominant in the aluminas. Even though brittle mode was dominant in the spinel composites the strength degradation from accumulation of damage above these critical loads was conspicuously small suggesting that the glass-infiltrated composites should be highly damage tolerant to the blunt contacts.

  • PDF

TiN 박막의 탄소성 유한요소해석 (Elastic-Plastic Finite Element Analysis of TiN Thin Film)

  • 김정실;김석삼
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제34회 추계학술대회 개최
    • /
    • pp.331-340
    • /
    • 2001
  • Elastic-Plasitc Finite element analysis is peformed about the TiN coated medium. The normal contact is simulated by a rigid asperity pressing the surface of an elastic-plastic half-surface. The case of a surface film stiffer than the substrate is considered, and general solutions for the subsurface stress and deformation fields are presented for several coating thickness. Additionally, the critical normal loads for deformation in the substrate and coating fracture are calculated when the yield of TiN film follows the Maximum Principal Stress Theory and Von Mises Theory. The results can be subsumed in failure maps for TiN thin film on steel.

  • PDF