• 한국재료학회지
• /
• 제14권7호
• /
• pp.482-488
• /
• 2004

$SiO_2$ nanowires were synthesized using the vapor evaporation method. Grown nanowires had a different shapes by kind of substrates. Diameters and lengths of the nanowires increased with increasing growth temperature and time. Mean diameters and lengths of $SiO_2$ nanowire were different by kind of substrates. These variations were attributed to nanowire densities on the substrates. The kind of substrates affected microstructure and PL properties of grown nanowires. In case of $Al_{2}O_3$ and quartz substrates, additional $O_2$ were supported during growth stages, and made a nucleation site. Therefore relative narrow nanowire was grown on $Al_{2}O_3$ and quartz substrates. Optical property were measured by photoluminescence spectroscopy. Relatively broad peak was obtained and mean peak positioned at 450 and 420nm. however in case of quartz substrates, mean peak positioned at 370nm. These peak shift was contributed to the size and substrate effects.

• 한국약용작물학회지
• /
• 제20권4호
• /
• pp.217-221
• /
• 2012

This research was conducted to investigate the influence of various organic substrates on growth and yield of ginseng seedling grown organically in the closed plastic house. The pH and EC of substrates used for organically ginseng cultivation ranged 5.93~6.78 and 0.03~0.15 dS/m respectively. The concentrations $NH_4$-N and $NO_3$-N respectively was 14.01~68.63 mg/L, 5.60~58.83 mg/L. The average quantum of the closed plastic house was range from 10 to 16% of natural light. In July and August, the maximum temperature of the closed plastic house did not exceed 30 and the average temperature was maintained within 25 lower than the field because air conditioning ran. The PPV-1 and PPV-2 bed soil substrates produced higher stem length, stem diameter, shoot fresh weight and leaf area than those of conventional culture. In PPV-2 bed soil substrates, root fresh weight and root diameter was the highest. The root fresh weight of PPV-2 bed soil substrates in closed plastic house was maximum 25% heavier than the conventional cultivation. The results of this experiment will be utilized for making new substrate application for organic ginseng culture in the plastic house.

• 한국재료학회지
• /
• 제16권4호
• /
• pp.218-224
• /
• 2006

RF sputtering process was applied to produce thin hydroxyapatite(HAp) films on Ti-6Al-4V alloy substrates. The effects of different heat treatment conditions on the hardness between HAp thin films and Ti-6Al-4V alloy substrates were studied. Before deposition, the Ti-6Al-4V alloy substrates were heat treated for 1h at $850^{\circ}C\;under\;3.0{\times}10^{-3}torr$, and after deposition, the HAp thin films were heat treated for 1h at $400^{\circ}C,\;600^{\circ}C\;and\;800^{\circ}C$ under the atmosphere, and analyzed FESEM-EDX, FTIR, XRD, nano-indentor, micro-vickers hardness, respectively. Experimental results represented that the surface defects of thin films decreased by relaxation of internal stress and control of substrate structure followed by heat treatment of substrates before the deposition, and the HAp thin films on the heat-treated substrates had higher hardness than none heattreated substrates before the deposition, and the hardness properties of HAp thin films and Ti-6Al-4V alloy substrates appeared independent behavior, and the hardness of HAp thin films decreased by formation of $VTiO_3(OH),\;{\theta}-Al_{0.32}V_2O_5,\;Al_{0.33}V_2O_5$.

• 생물환경조절학회지
• /
• 제10권2호
• /
• pp.106-110
• /
• 2001

양액재배용 배지로 팽연화 왕겨를 사용할 경우 반촉성 및 억제 재배용으로 사용 가능한 횟수는 3회 사용시 $Ca^{++}$의 다량 용출로 인한 배지의 다져짐이 나타나며 원형여지크로마토그래피상의 부숙도 판정에서도 2작기 경과동안 거의 부숙되는 것으로 미루어 2회까지 사용이 안정적인 것으로 판단되였다. 2회 사용일수의 합산이 245일 이고 정상적인 급액은 이루어지지 않았으나 30일 정도의 재상용전 기간 동안에도 습윤상태를 유지한 것으로 미루어 장기재배 1작기에도 사용이 가능한 것으로 판단되나 펄라이트의 적정 사용기간에 비해 1/3 정도로 사용기간은 짧은 편이었다. 교체비용을 포함한 배지 재료비는 펄라이트 대비 65.3% 정도로 경제적이었다.

• Journal of Periodontal and Implant Science
• /
• 제47권2호
• /
• pp.116-131
• /
• 2017

Purpose: The entry of bacteria or harmful substances through the epithelial seal of human gingival keratinocytes (HGKs) in the junctional epithelium (JE) is blocked by specialized intercellular junctions such as E-cadherin junctions (ECJs). However, the influence of roughened substrates, which may occur due to apical migration of the JE, root planing, or peri-implantitis, on the development of the ECJs of HGKs remains largely unknown. Methods: HGKs were cultured on substrates with varying levels of roughness, which were prepared by rubbing hydrophobic polystyrene dishes with silicon carbide papers. The activity of c-Jun N-terminal kinase (JNK) was inhibited with SP600125 or by transfection with JNK short hairpin RNA. The development of intercellular junctions was analyzed using scanning electron microscopy or confocal laser scanning microscopy after immunohistochemical staining of the cells for E-cadherin. The expression level of phospho-JNK was assessed by immunoblotting. Results: HGKs developed tight intercellular junctions devoid of wide intercellular gaps on smooth substrates and on rough substrates with low-nanometer dimensions (average roughness $[Ra]=121.3{\pm}13.4nm$), although the ECJs of HGKs on rough substrates with low-nanometer dimensions developed later than those of HGKs on smooth substrates. In contrast, HGKs developed short intercellular junctions with wide intercellular gaps on rough substrates with mid- or high-nanometer dimensions ($Ra=505.3{\pm}115.3nm$, $867.0{\pm}168.6nm$). Notably, the stability of the ECJs was low on the rough substrates, as demonstrated by the rapid destruction of the cell junction following calcium depletion. Inhibition of JNK activity promoted ECJ development in HGKs. JNK was closely associated with cortical actin in the regulation of ECJs in HGKs. Conclusions: These results indicate that on rough substrates with nanometer dimensions, the ECJs of HGKs develop slowly or defectively, and that this effect can be reversed by inhibiting JNK.

• 원예과학기술지
• /
• 제29권2호
• /
• pp.95-101
• /
• 2011

코코피트 + 펄라이트(5:5, A), 코코피트 + 펄라이트(6:4, B), 코코피트 + 펄라이트(7:3, C), 코코피트 + 코코칩(7:3, D), 코코피트 + 코코칩(6:4, E), 그리고 피트모스 + 버미큘라이트(5:5, F)의 6종류 상토를 혼합하고 플라스틱 백에 충전하였다. 다음 '설향' 딸기의 모주를 재배하면서 상토 물리 화학성이 모주 생육과 자묘 발생에 미치는 영향을 구명하기 위하여 본 연구를 수행하였다. 본 연구에서 조제된 모든 상토는 공극률이 85% 이상, 용기용수량이 55% 이상으로 측정되어 모든 상토가 수용 가능한 범위에 포함되었지만, F 상토의 공극률과 용기용수량이 각각 91.5% 및 60%로 다른 상토들보다 뚜렷하게 높았다. '설향' 딸기의 정식 전 또는 작물을 수확한 후 분석한 상토의 화학성에서 상토 A, B, C, 및 F의 전기전도도 및 질산태 질소 농도가 상토 D 또는 E보다 높았다. 또한 염 농도가 높았던 상토 A, B, C, 및 F의 런너 생체중, 건물중, 및 길이 그리고 자묘 발생수가 염농도가 낮았던 상토 D 및 E보다 많았으며, 상토의 물리성 보다 화학성이 런너의 생장 및 자묘 발생에 더 큰 영향을 미쳤다. '설향' 딸기의 정식 120일 후 지상부 전체의 무기물 함량을 분석한 결과에서 질소함량은 F 상토를 제외한 다른 상토들 간에 유의차를 발견할 수 없었는데, 이는 주정리를 통해 하위엽을 제거해준 것이 원인이 되었다고 판단하였다. 분석한 다른 원소의 식물체내 함량도 F 상토에서 뚜렷하게 높아 화학성이 자묘 발생에 큰 영향을 미침을 알 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제18권9호
• /
• pp.1522-1528
• /
• 2008

The morphogenetic behavior of a tropical marine Yarrowia lipolytica strain on hydrophobic substrates was studied. Media containing coconut oil or palm kernel oil (rich in lauric and myristic acids) prepared in distilled water or seawater at a neutral pH supported 95% of the cells to undergo a transition from the yeast form to the mycelium form. With potassium laurate, 51 % of the cells were in the mycelium form, whereas with myristate, 32% were in the mycelium form. However, combinations of these two fatty acids in proportions that are present in coconut oil or palm kernel oil enhanced the mycelium formation to 65%. The culture also produced extracellular lipases during the morphogenetic change. The yeast cells were found to attach to the large droplets of the hydrophobic substrates during the transition, while the mycelia were associated with the aqueous phase. The alkane-grown yeast partitioned more efficiently in the hydrophobic phases when compared with the coconut oil-grown mycelia. A fatty acid analysis of the mycelial form revealed the presence of lauric acid in addition to the long-chain saturated and unsaturated fatty acids observed in the yeast form. The mycelia underwent a rapid transition to the yeast form with n-dodecane, a medium-chain aliphatic hydrocarbon. Thus, the fungus displayed a differential behavior towards the two types of saturated hydrophobic substrates.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.961-968
• /
• 2009

In this work, transparent conductive oxide(TCO) films such as $In_2O_3-SnO_2$(ITO) and $In_2O_3-ZnO$(IZO) were prepared on polyethylene naphthalene(PEN) and glass substrates by using rf-magnetron sputtering system. The TCO films deposited on PEN substrate show very poor conductivity as compared to that of the TCO films deposited on glass substrates. From the results of the residual gas analysis(RGA) test, this poor stability of plastic substrate is presumed to be caused by the deteriorated adhesion between the TCO films and the plastic substrate due to outgassing from the plastic substrate during deposition of TCO films. From our experiment, it is found that the vaporization of some defects in the plastic substrates deteriorate the adhesion of the TCO films to the plastic substrate, because the most plastic substrates containing the water vapor and/or other adsorbed particles such as organic solvents. Mixing of these gases vaporized in the sputtering process will also affect the electrical property of the deposited TCO films. Inorganic thin composite $(SiO_2)_{40}(ZnO)_{60}$ film as a gas barrier layer is coated on the PEN substrate to protecting the diffusion of vapors from the substrate, so that the TCO films with an improved quality can be obtained.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.38-41
• /
• 2006

Surface of PC (Polycarbonate) and PES (Polyethersulphone) treated by plasma modification with rf power from 50 W to 200 W substrates in Ar (3 sccm), $O_2$ (12 sccm) atmosphere. From the results of modified substrates in XPS (X-ray Photoelectron Spectroscopy), the ratio of oxide containing bond increased with rf power. As the rf power was 200 W, the contact angle was the lowest value of 14.09 degree. And the datum from AFM (Atomic Force Microscopy), rms roughness value of PES and PC substrates increased with rf power. We could deposit $Ta_2O_5$ with good adhesion on plasma treated PES and PC substrates using by in-situ rf magnetron sputter.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.103-108
• /
• 2000

The texture of Al/Ti thin films deposited on low-dielectric polymer substrates has been investigated. Fifty-nm-thick Ti films and 500-nm-thick Al-1%Si-0.5%Cu (wt%) films were deposited sequentially onto low-k polymers and SiO$_2$ by using a DC magnetron sputtering system. The texture of Al thin film was determined using X-ray diffraction (XRD) theta-2theta ($\theta$-2$\theta$) and rocking curve and the microstructure of Al/Ti films on low-k polymer and SiO$_2$ substrates was characterized by Transmission electron microscopy (TEM). hall thin films deposited on SiO$_2$ had stronger texture than those deposited on low-k polymer. The texture of Al thin films strongly depended on that of Ti films. Cross-sectional TEM resealed that Brains of Ti films on SiO$_2$ substrates had grown perpendicular to the substrate, while the grains of Ti films on SiLK substrates were farmed randomly. The lower degree of 111 texture of Al thin films on low-k polymer was due to Ti underlayer.