• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.743-748
• /
• 2014

In this work, we describe a very simple electroless deposition method to prepare moderate-SERS-active nanostructured Pd films deposited on the glass substrates. To the best of our knowledge, this is the first report on the one-pot electroless method to deposit Pd nanostructures on the glass substrates. This method only requires the incubation of negatively charged glass substrates in ethanol-water mixture solutions of $Pd(NO_3)_2$ and butylamine at elevated temperatures. Pd films are then formed exclusively and evenly on glass substrates. Due to the aggregated structures of Pd, the SERS spectra of benzenethiol and organic isonitrile could be clearly identified using the Pd-coated glass as a SERS substrate. This one-step fabrication method of Pd thin film on glass is cost-effective and suitable for the mass production.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.846-851
• /
• 2004

Transparent conducting indium tin oxide (TC-ITO) thin films on polymeric substrates have been deposited by a dc reactive magnetron sputtering without heat treatments. The polymeric substrates are acryl (AC), poly carbornate (PC), and polyethlene terephthalate (PET) as well as soda lime glass is also used to compare with the polymeric substrates. Sputtering parameters are an important factor for high quality of TC-ITO thin films prepared on polymeric substrates. Furthermore, the material, electrical and optical properties of as-deposited ITO films are dominated by the ratio of oxygen partial pressure. As the experimental results, the surface roughness of ITO films becomes rough as the oxygen partial pressure increases. The electrical resistivity of as-deposited ITO films decreases initially, and then increases with the increase of oxygen partial pressure. The optical transmittance at visible wavelength for all polymeric substrates is above 82 %.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.231-234
• /
• 1998

LaNiO3 thin films were fabricated on various substrates by spin-coating technique using metal naphthenates as starting materials. Highly-oriented LaNiO3 films with smooth and crack-free surfaces were grown on SrTiO3 (100) and LaAlO3(100) substrates, while films on MgO(100) and Si(100) substrates showed random orientation. In this study, we concluded that lattice-mismatches between LaNiO3 films and substrates used affect film's properties.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.457-457
• /
• 2012

We presented plasma processing using a DC Arc Plasmatron for diamond deposition on Al2O3 ceramic substrates. Plasma surface treatments were conducted to improve deposition condition before processing for diamond deposition. The Al2O3 ceramic substrates deposited, $5{\times}15mm^2$, were investigated by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD). Properties of diamond (111), (220) and (311) peaks were shown in XRD. We identified nanocrystalline diamond films on substrates. The results showed that deposition rate was approximately $2.2{\mu}m/h$ after plasma surface treatments. Comparing the above result with a common processing, deposition rate was improved. Also, the surface condition was improved more than a common processing for diamond deposition on Al2O3 ceramic substrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.459-459
• /
• 2011

Graphene has many fascinating material properties such as high electron mobility, high optical transparency, excellent thermal conductivity, superior Young's modulus, etc. Several studies have recently found that single-layer graphene is chemically more reactive than few-layer graphene when supported on silicon dioxide substrates with sub-nm roughness. In this study, we have investigated the influence of substrates on chemical reactivity of graphene. Morphology and thermal oxidation behavior of graphene on atomically flat mica substrates were studied by atomic force microscopy (AFM) and Raman spectroscopy compared to graphene on SiO2/Si substrates. Notably, oxidation of single-layer graphene proceeds more slowly on mica than SiO2/Si. Detailed analysis led to a conclusion that deformation along the out-of-plane direction enhances reactivity of graphene.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.430-430
• /
• 2011

Graphene, one single atomic layer of graphite, has attracted extensive attention in various research fields since its first isolation from graphite. Application in the future electronics requires better understanding and manipulation of electronic properties of graphene supported on various solid substrates. Here, we present a study on charge doping and morphology of graphene prepared on atomically flat and highly polar mica substrates. Ultra-flat single-layer graphene was prepared by micro-exfoliation of graphite followed by deposition on cleaved mica substrates. Atomic force microscopy (AFM) revealed presence of ultra-thin water films formed in a layer-by-layer manner between graphene and mica substrates. Raman spectroscopy showed that a few angstrom-thick water films efficiently block electron transfer from graphene to mica. Hole doping in graphene caused by underlying mica substrates was also visualized by scanning Kelvin probe microscopy (SKPM).

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.31-35
• /
• 1998

1. INTRODUCTION : Recognition and binding of organic substrates by biological molecules are of vital importance in biophysics and biophysical chemistry. Most studies of the application focused on the development of biosensors, which detected reaction products generated by the binding between enzymes and substrates. Other types of biosensors in which membrane proteins (e.g., nicotinic acetylcholine receptor, auxin receptor ATPase, maltose bining protein, and glutmate receptor) were utilized as a receptor function were also developed. In the previous study[1], the shifts in membrane potential, caused by the injection of substrates into a permeation cell, were measured using immobilized glucose oxidase membranes. It was suggested that the reaction product was not the origin of the potential shifts, but the changes in the charge density in the membrane due to the binding between the enzyme and the substrates generated the potential shifts. In this study, $\gamma$-globulin was immobilized (entrapped) in a poly($\gamma$-amino acid) network, and the shifts in the membrane potential caused by the injection of some amino acids were investigated.

• Plant Resources
• /
• v.8 no.3
• /
• pp.175-180
• /
• 2005

Thin sections of cellulose fibers were incubated with an endo- and an exoglucanase labeled with gold particles of differing sizes. The hydrolytic sites were then visualized under transmission electron microscopy (TEM). The potential interaction between the ${\beta}$-1, 4-glucan substrates and the endo- and the exoglucanases was investigated using cellulosic and lignocellulosic substrates. The simultaneous visualization was very successful in distinguishing preferred substrates for each cellulase in lignocellulosic substrates. When plant lignocellulose was preincubated with endocellulase, density of the gold labeling greatly increased suggesting that preliminary exposure of lignocellulosic material to endocellulase may have enhanced the accessibility of the substrate to endocellulase and exocellulase. This result provided a plausible explanation for the observed endo/exo cellulase co-hydrolysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.828-830
• /
• 2000

Various substrates were compared for the investigation of the optical properties of ZnO thin films. ZnO thin films have been deposited on (100) p-type silicon substrates and (001) sapphire substrates by pulsed laser deposition technique using a Nd:YAG laser with the wavelength of 355 nm. Oxygen and nitrogen gases were used as ambient gases. Substrate temperatures were varied in the range of 200$^{\circ}C$ to 600$^{\circ}C$ at a fixed ambient gas pressure of 350 mTorr. ZnO films have been deposited on various substrates, such as Si and sapphire wafers. We have investigated substrate effect on the optical and structural properties of ZnO thin films using X-ray diffraction (XRD) and photoluminescence (PL).

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.14-19
• /
• 2000

Due to distinct properties of plastic substrates such as poor thermal resistance, non-rigidness and high thermal expansion, it is difficult to fabricate plastic film LCDs by conventional LCD processes. Poor thermal resistance and high thermal expansion of substrates induced deformation of substrates surface, mismatch of thermal expansion between ITO electrodes and substrates resulted in defects in the ITO electrodes during the high temperature process. Defects of ITO electrodes and non-uniform cell gap caused by non-rigid and flexible properties were also observed in the pressuring process. Based on in these observations, we used a newly developed material and fabrication process to prevent deformation of substrates, defects of electrodes and to maintain uniform cell gap. The maximum temperature of the process is limited up to $110^{\circ}C$ and pressure loaded during the process is five times less than conventional one. With these invented processes and materials, we obtained highly reliable Plastic Film STN LCDs whose electro-optical characteristics are better than or equivalent to those of typical glass LCDs.