• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.493-499
• /
• 2011

The objective of this study was to find the way to prolong the storage time of sawdust-based oyster mushroom (Pleurotus osteratus) spent substrate (OMSS) by fermenting with potential probiotic microorganisms to recycle the otherwise waste of mushroom farms. To this purpose, lactic acid bacteria (LAB) were screened to select the best lactic acid-producing strains. Three strains of LAB (Lactobacillus plantarum Lp1', Pediococcus acidilacticii Pa193, L. plantarum Lp2M) were selected and in mixture they lowered the pH of the fermented OMSS to 3.81. fOMSS (fermented sawdust-based oyster mushroom spent substrate) could be stored at room temperature for at least 17 days without any deterioration of feed quality based on the pH, smell, and color. In dry matter disappearance rate in situ, commercial TMR (total mixed ration), OMSS and OMMM (oyster mushroom mycelium mass) showed no significant differences between the samples after 6, 12 and 24 h incubation except for 48 h. Two separate field studies were performed to test the effects of fOMSS supplement on the growth performance of postweaning Holstein calves. Field trials included groups of animals feeding calf starter supplemented with: Control (no supplement), AB (colistin 0.08% and oxyneo 110/110 0.1%), fOMSS (10% fOMSS) and fConc (10% fermented concentrate) and DFM (direct-fed microbials, average $10^9$ cfu for each of three LAB/d/head). Growth performance (average daily gain and feed efficiency) of the fOMSS supplement group was higher than that of AB followed by fConc and DFM even though there was no statistically significant difference. The Control group was lower than any other group. Various hematological values including IgG, IgA, RBC (red blood cell), hemoglobin, and hematocrit were measured every 10 days to check any unusual abnormality for all groups in trial I and II, and they were within a normal and safe range. Our results suggest that sawdust-based OMSS could be recycled after fermentation with three probiotic LAB strains as a feed supplement for post-weaning calves, and fOMSS has the beneficial effects of an alternative to antibiotics for a growth enhancer in dairy calves.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.216-220
• /
• 1996

In the present paper, a new type of DC arc plasma torch is disclosed. The principles of the new magnetic and fluid dynamic controlled large orifice long discharge tunnel plasma torch is discussed. Two series of DC Plasma Jet diamond film deposition equipment have been developed. The 20kW Jet equipped with a $\Phi$70 mm orifice torch is capable of deposition diamond films at a growth rate as high as 40$\mu\textrm{m}$/h over a substrate area of $\Phi$65 mm. The 100kW high power Jet which is newly developed based on the experience of the low power model is equipped with a $\Phi$120 mm orifice torch, and is capable of depositing diamond films over a substrate area of $\Phi$110 mm at growth rate as high as 40 $\mu\textrm{m}$/h, and can be operated at gas recycling mode, which allows 95% of the gases be recycled. It is demonstrated that the new type DC plasma torch can be easily scaled up to even higher power Jet. It is estimated that even by the 100kW Jet, the cost for tool grade diamond films can be as low as less than ＄4/carat.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.4
• /
• pp.489-494
• /
• 2013

Effects of operating parameters such as hydraulic retention time(HRT), recycle ratio and influent COD concentration on the performance of a continuous flow microbial fuel cell(MFC) were investigated. Decrease of HRT improved mass transfer of substrate to electrogenic microorganisms, therefore resulting in increased electrode voltage and power generation of MFC. Increase of HRT promoted COD removal by elongating retention time for COD removal in MFC. Recycling of effluent increased the COD removal and coulombic efficiencies by returning suspended microorganisms into MFC. Increase of influent COD enhanced COD removal due to the improved mass transfer of substrate. Decrease of coulombic efficiency by the increase of the HRT and influent COD concentration indicated that they enhanced the activities of fermentative bacteria.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.3
• /
• pp.55-62
• /
• 2017

In this study, we investigated the effect of seaweed (SW) addition on the anaerobic digestion of food waste (FW). Anaerobic batch experiments were carried out at various substrate concentrations (2.5 to 10.0 g VS/L) and mixing ratios (FW:SW=100:0, 75:25, 50:50, 25:75 and 0:100 on VS basis) of FW and SW. The methane yield of FW alone was 394, 377, 276, $49mL\;CH_4/g\;VS_{added}$ at each substrate concentration (2.5 to 10.0 g VS/L). In cases of co-digestion, methane yield decreased (up to 15 %) with increasing mixing ratio of SW at low substrate concentration (2.5 to 5.0 g VS/L), while it increased (up to 240 %) at high substrate concentration (7.5 to 10.0 g VS/L). The synergistic effect was calculated based on the amount of methane generated from the single-feedstock digestion of FW and SW. The synergistic effect was not found at 2.5 and 5.0 g VS/L. However, the synergistic effect increased (up to 25% = synergistic increment/total methane production at 10.0 g VS/L, FW:SW=50:50) with increasing the ratio of seaweed at 7.5 and 10.0 g VS/L. At 10.0 g VS/L of FW alone, the accumulated amount of organic acids was 7,426 mg COD/L, which was decreased to 2,346 mg COD/L by seaweed (FW:SW=50:50) addition. The reason for the synergistic effect was to control the production rate of the organic acids by adding SW that has a relatively lower biodegradability compared to FW.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.73-82
• /
• 2023

This study was conducted to investigate the effect of soil physico-chemical properties and crop growth responses for application of biochar derived from substrate with post harvest of oyster mushroom. The biochar was produced at 450~600℃ using a top-light up draft gasifier (TLUD) production system. As a result of elemental analysis, the biochar used was C 76.2%, H 2.5%, N 3.2%, and H/C was 0.39, which met the international certification standards for biocarbons (IBI) below 0.7. The chemical properties were 10.1 for pH, 1.0% for P₂O₅, 1.8% for K₂O, and 2.5% for CaO. The application rates of biochar were 0, 100, 200, 300, and 500 kg/10a. For cultivation of chinese cabbage and welsh onion, soil organic matter (OM), total nitrogen (T-N), total carbon (T-C), Ex.cation K contents and cation exchange capacity (CEC) in the treatments were increased compared to the no treatment. In addition, the bulk density was lowered and the porosity was increased, improving the soil physical properties in the treated soil. The growth of chinese cabbage and green onion increased with the application of biochar, but the yields of chinese cabbage and green onion did not significantly different among the treatments. Soil carbon sequestration in the treatments enhanced with increasing the amount of biochar application. It is expected to apply the biochar derived from spent oyster mushroom substrate in the eco-friendly farm soil management, improving soil physico-chemical properties.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.3-9
• /
• 2023

Separation of LED packages from PCBs and analysis of the adhesive components was conducted to enhance the recycling potential of LED modules. LED package was separated from PCBs using heat treatment under optimal conditions: temperature of above 250 ℃ and time of 20 minutes. The separation equipment can be established using a hot air injector with controlling the rotational speed of the internal screw. The separation efficiency of each type of substrate (aluminum and glass fiber) was investigated with the thickness range of the adhesive materials (0.25-0.30 and 0.30-0.35 mm). Under the optimal conditions, the efficiency can reach to 97.5% for both types of substrates with adhesive materials of thickness 0.25~0.30mm. Characterization of the residual adhesive substances from the separated LED package and PCB using microwave digestion and ICP analysis showed that the residue contained of 95% of Sn, less than 5% of Cu and Ag.

• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.50-53
• /
• 2015

Indium (In) is widely used for transparent electrodes of photovoltaics as a form of indium tin oxide (ITO) due to its superior characteristics of environmental stability, relatively low electrical resistivity and high transparency to visible light. However, In has been worn off in proportion to growth the In related market, and it leads to raise of price. Although In is obtained from ITO target scarps, much harmful elements are used for the recycling process. To decrease of harmful elements, ITO swarf particles obtained from target scraps was characterized whether it is feasible to transparent conductive oxide (TCO). The ITO swarf was crushed with milling process, and it was mixed with new ITO nanoparticles. The mixed particles were well dispersed into ink solvent to make-up an ink, and it was well coated onto glass substrate. After heat-treatment at $400^{\circ}C$ under $N_2$ rich environments, optical transmittance at 550 nm and sheet resistance of the ITO ink coated layer was 71.6% and $524.67{\Omega}/{\square}$, respectively. Therefore, it was concluded that the ITO swarf was feasible to TCO of touch screen panel.

• Microbiology and Biotechnology Letters
• /
• v.19 no.4
• /
• pp.419-427
• /
• 1991

Ethanol fermentation of glucose by a strain of Saccharomyces cereuisiae was studied in membrane recycle bioreactor, where the fermentation vessel was coupled with cross flow hollow fiber membrane. The cell recycle system controlled backflushing with fresh medium was proven to be effective in alleviating membrane fouling and allowing long term operation of high-cell continuous fermentation. Using 100 g/l initial glucose concentration, the maximum productivity of about 9 5 g/$l \cdot h$ has been achieved at dilution rate 2.5 $h^{-1}$ and bleed stream ratio 0.05 with the corresponding ethanol concentration of 35g/l and glucose conversion of 100%. Increasing the glucose concentration to 200 g/$l \cdot h$ resulted in an increase in ethanol concentration to 48 g/l and productivity to 120 g1l.h. Substrate conversion, however, was only 69%. This productivity was the highest value in the study, and about 38 fold more than that of batch culture and 17 fold more that of single stage continuous culture without cell recycling. No further increase in the productivity was obtained when the glucose concentration was increased reased to 300g/l.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.9
• /
• pp.1300-1306
• /
• 2010

Ethyl (R, S)-4-chloro-3-hydroxybutanoate (ECHB) is a useful chiral building block for the synthesis of L-carnitine and hypercholesterolemia drugs. The yeast reductase, YOL151W (GenBank locus tag), exhibits an enantioselective reduction activity, converting ethyl-4-chlorooxobutanoate (ECOB) exclusively into (R)-ECHB. YOL151W was generated in Escherichia coli cells and purified via Ni-NTA and desalting column chromatography. It evidenced an optimum temperature of $45^{\circ}C$ and an optimum pH of 6.5-7.5. Bacillus subtilis glucose dehydrogenase (GDH) was also expressed in Escherichia coli, and was used for the recycling of NADPH, required for the reduction reaction. Thereafter, Escherichia coli cells co-expressing YOL151W and GDH were constructed. After permeablization treatment, the Escherichia coli whole cells were utilized for ECHB synthesis. Through the use of this system, the 30 mM ECOB substrate could be converted to (R)-ECHB.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.851-855
• /
• 2013

This paper describes an environmentally friendly process for the recovery of $LiFePO_4$ cathode materials from scrap electrodes by a simple thermal treatment method. The active materials were easily separated from the aluminum substrate foil and polymeric binders were also decomposed at different temperatures ($400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$) for 30 min under nitrogen gas flow. The samples were characterized by X-ray diffraction (XRD), scanning electronic microscopy (SEM), Raman spectroscopy, Thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The electrochemical properties of the recycled $LiFePO_4$ cathode were evaluated by galvanostatic charge and discharge modes. The specific charge/discharge capacities of the recycled $LiFePO_4$ cathode were similar to those of the original $LiFePO_4$ cathode. The $LiFePO_4$ cathode material recovered at $500^{\circ}C$ exhibits a somewhat higher capacity than those of other recovered materials at high current rates. The recycled $LiFePO_4$ cathode also showed a good cycling performance.