• KSBB Journal
• /
• 제28권1호
• /
• pp.48-53
• /
• 2013

Pretreatment of wastepaper using aqueous glycerol was investigated to enhance the enzymatic hydrolysis. The effects of four factors (solid/liquid ratio, glycerol concentration, acid concentration, and reaction time) on the dissolution yield, the removal of cellulose, hemicellulose and lignin, and the enzymatic digestibility were examined at $150^{\circ}C$. The 1/8 of solid/liquid was determined to perform the reaction uniformly, and the 93% of glycerol concentration was found to be a minimum concentration to conduct the reaction under atmospheric pressure. Also, it was found that the acid concentration and reaction time were strongly related to the dissolution yield and the removal of cellulose, hemicellulose and lignin, but moderately to the enzymatic digestibility. At an optimum condition of $150^{\circ}C$, 1 h and 1% acid concentration, 56% and 49% of hemicellulose and lignin, respectively, were removed, while only 4% of cellulose was removed. The enzymatic digestibility at this condition was 86%, meaning that 83% of the glucan present in the initial substrate was converted to glucose. Compared to glycerol with ethylene glycol as a pretreatment solvent, glycerol is much cheaper than ethylene glycol, but ethylene glycol is superior to glycerol in delignification.

• 한국전기전자재료학회논문지
• /
• 제19권6호
• /
• pp.501-506
• /
• 2006

Carbon nanotubes (CNTs) were grown with a microwave plasma enhanced chemical vapor deposition (MPECVD) method, which has been regarded as one of the most promising candidates for the synthesis of CNTs due to the vertical alignment, the low temperature and the large area growth. MPECVD used methane ($CH_4$) and hydrogen ($H_2$) gas for the growth of CNTs. 10 nm thick Ni catalytic layer were deposited on the Ti coated Si substrate by RF magnetron sputtering method. In this work, the pretreatment was that the Ni catalytic layer in different microwave power (600, 700, and 800 W). After that, CNTs deposited on different pressures (8, 12, 16, and 24 Torr) and grown same microwave power (800 W). SEM (Scanning electron microscopy) images showed Ni catalytic layer diameter and density variations were dependent with their pretreatment conditions. Raman spectroscopy of CNTs shows that $I_D/I_G$ ratios and G-peak positions vary with pretreatment conditions.

• Journal of the Korean Wood Science and Technology
• /
• 제30권4호
• /
• pp.8-16
• /
• 2002

본 연구는 자기가수분해전처리를 통하여 반응성이 높은 고순도 셀룰로오스기질을 제조하기 위하여 수행되었다. 공시재의 일반 화학조성은 일본잎갈나무와 신갈나무간에 큰 차이가 있음을 알 수 있었다. 추출물함량은 일본잎갈나무가 신갈나무보다 상당량 많았다. 특히 냉·온수 추출물함량은 2.5~3.5배 많았다. 이러한 추출물함량의 큰 차이는 일본잎갈나무에는 arabinogalactan이 많이 함유되어 있기 때문인 것으로 사료된다. 리그닌함량은 신갈나무가 잎갈나무바다 5% 정도 낮았으며, 그 대신 홀로셀룰로오스 및 펜토산함량이 각각3% 정도 높은 값으로 나타났다. 22 kg/cm² 수증기압력에서 5~60분간의 자기가수분해 전처리과정에서 glucose 함량에는 변화가 없었으나, hemicellulose 및 lignin 함량은 급력한 변화를 보였다. 전처리과정에서 가수분해물의 pH는 3까지 저하되었으며, 이러한 경향은 신갈나무 및 일본잎갈나무에서 동일하게 나타났다. Sodium chlorite 및 sulfite 혹은 bisulfite 전처리 후 자기가수분해가 리그닌함량이 낮은 고순도셀룰로오스기질의 제조에 효과적이었다. 특히 자기가수분해처리재를 알칼리 및 산소-알칼리 2단처리함으로서 0~0.2%의 리그닌함량을 가지는 고순도기질을 제조할 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.215-221
• /
• 2017

The electroless plating process largely consists of substrate cleaning, seed formation (activator formation), and electroless plating. The most widely used activator in the seed formation step is Pd, and Sn ions are used to facilitate the formation of this Pd seed layer. This is problematic because the Sn ions interfere with the reduction of Cu ions during electroless plating; thus, the Sn ions must be removed by a hydrochloric acid cleaning process. This method is also expensive due to the use of Pd. In this study, Cu electroless plating was performed by forming a seed layer using a silver nanosol instead of Pd and Sn. The effects of the Ag nanosol concentration in the pretreatment solution and the pretreatment time on the thickness and surface morphology of the Cu layer were investigated. The degrees of adhesion to the substrate were similar for the electroless-plated Cu layers formed by conventional Pd activation and those formed by the Ag nanosol.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.324-328
• /
• 2001

아크이온 플레이팅 장치를 이용하여 STD61강 기판 위에 이온질화 전처리를 행하거나 하지 않은 후, CrN 박막을 증착하고, 대기중 $700~900^{\circ}C$의 온도에서 40시간동안 이들에 대한 산화거동을 연구하였다. 산화거동은 열중량분석기, X선회절기, EDS, SEM을 이용하여 조사하였다. 증착된 CrN박막은 CrN과 $Cr_2$N의 두 상으로 구성되어 있었다. CrN박막은 보호적 $Cr_2$O$_3$층을 형성하여 기판을 산화로부터 보호하였다. 이온질화처리는 CrN박막의 내산화성에 영향을 주지 않았다.

• 한국표면공학회지
• /
• 제28권3호
• /
• pp.133-141
• /
• 1995

The deposition characteristics of diamond films were investigated for three different substrates : Si, Inconel 600 and steel. Diamond films were prepared by microwave plasma CVD method using $CH_4$, $H_2$ and $O_2$ as reaction gases. The deposited films were analyzed with SEM, Raman spectroscopy and ellipsometer. For Si substrate, diamond films were successfully obtained for most of the deposition conditions used in this study. As the $CH_4$ flow rate decreased and the $O_2$ flow rate increased, the quality of the film was improved due to the reduced non-diamond phase in the film. For Inconel 600 substrate, the surface pretreatment with diamond powders was required to deposit a continuous diamond film. The films deposited at temperatures of $600^{\circ}C$ and $700^{\circ}C$ had mainly diamond phase, but they were peeled off locally due to the difference in the thermal expansion coefficient between the substrate and the deposited films. The films deposited at $500^{\circ}C$ and $850^{\circ}C$ had only the graphitic carbon phase. For steel substrate, all of the films deposited had only the graphitie carbon phase. We speculated that the formation of diamond nuclei on the steel substrate was inhibited due to the diffusion of carbon atoms into the steel substrate which has a large amount of carbon solubility.

• Journal of the Korean Wood Science and Technology
• /
• 제40권3호
• /
• pp.147-155
• /
• 2012

본 연구에서는 스위치그라스를 바이오에탄올 생산용 바이오매스로 선정하여 팝핑 전처리, 효소가수분해 및 발효 과정을 거쳐 바이오 에탄올의 생산 가능성을 조사하였다. 팝핑 전처리 된 스위치그라스에 효소를 처리하여 가수분해 한 결과 95% 이상의 효소 가수분해 효율을 보였고, 가수분해 후 생성된 당화액을 효모(Saccharomyces cerevisiae)로 발효하였을 때 생산된 바이오에탄올의 수율은 89.6%에 이르렀다. 팝핑 전처리 후 바이오매스의 글루코스와 자일로스의 함량은 각각 40.8%와 20.3%로 나타나 전처리 후 글루코스 함량에는 큰 변화가 없었으나, 자일로스의 함량이 4.7% 감소하는 것으로 보아 헤미셀룰로스 영역이 전처리 과정에서 제거된 것으로 보인다. 또한, 주사형 전자현미경 결과에 의하면 전처리 전에는 스위치그라스 표면이 비교적 매끈하고, 입방체 모양을 이루고 있었으나, 전처리 후에는 섬유가 각각 분리되어 있었으며 표면에 많은 미세공극이 생겨난 것을 관찰할 수 있었다. 그러므로 팝핑 전처리는 스위치그라스 시료의 셀룰로스 노출면적을 넓혀주는 역할을 하여 셀룰레이즈 효소의 접근성을 높여 효소 당화 효율을 증대시키는 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권2호
• /
• pp.145-162
• /
• 2019

This study aimed to increase the sugar and ethanol yield from the mengkuang plant biomass through biological and liquid hot water (LHW) pretreatment and their combination. The results showed that biological pretreatments with 5% inoculum of the fungus Trametes versicolor resulted in the highest alpha cellulose content incubated for 30 days, and 10% inoculum resulted in the lowest lignin content. LHW pretreatment decreased the hemicellulose content of pulps from 10.17% to 9.99%. T. versicolor altered the structure of the mengkuang pulp by degrading the lignin and lignocellulose matrix. The resulting delignification and cellulose degradation facilitate the hydrolysis of cellulose into sugars. The alpha cellulose content after biological-LHW pretreatment was higher (78.99%) compared to LHW-biological pretreatment (76.85%). Scanning electron microscopy analysis showed that biological-LHW combinated treatment degrades the cell wall structures. The ethanol yield for biological-LHW pretreated sample was observed 43.86% (13.11 g/L ethanol by weight of the substrate, which is much higher than that of LHW-biological pretreatment (34.02%; 9.097 g/L). The highest reducing sugar content about 45.10% was observed with a resulting ethanol content of 15.5 g/L at LHW pretreatment temperature of $180^{\circ}C$ for 30 min.

• 한국환경농학회지
• /
• 제15권3호
• /
• pp.391-398
• /
• 1996

The pretreatment of bark powder with sodium hydroxide and formalin showed the most excellent adsorption ratio, but this method could not practically be used because of the occurrence of dark-colored pigments in filtrates during pretreatment. Instead, acid and formalin were the most affirmative and effective among the pretreatment methods tested, and could be used for this purpose. Among tested species, Quercus acutissima and Robinia pseudo-accacia showed the largest amount of metal adsorption, and $Pb^{2+}$ was the best(83 to 96%) among the four heavy metals tested. The order of adsorption ratios other metals was as follows; $Cu^{2+}$ > $Zn^{2+}$ > $Cd^{2+}$, and the ratio was approximately 45 to 55%. In addition, as the substrate amount increased, the amount of adsorbed heavy metals in subtrates gradually increased, but the adsorbed amount was not proportional to the substrate amount. The order of heavy metal adsorption was as follows; $Pb^{2+}$ > $Cu^{2+}$ > $Cd^{2+}$ > $Zn^{2+}$. Depending on flow rate and column size, pine bark power adsorbed more heavy metals in the 5ml/min flow rate and 3.5cm column size rather than the 10ml/min and 2.0cm. However, oak bark power showed contrary results compared with pine bark powder. The adsorption of $Pb^{2+}$ occurred rapidly in the incipient stagte. Even though bark powders were repeatedly used three times, there was no change in the adsorption ratio(45%), but after four times, the adsorption ratio was significantly reduced to 35%.

• 대한한의학방제학회지
• /
• 제9권1호
• /
• pp.355-366
• /
• 2001

Objectives : Oldenlandiae Diffusae herba has been used as a natural drug for tumor, inflammation and liver disease in traditional medicine. This study was performed in order to investigate the antioxidative effects of Oldenlandiae Diffusae herba methanol extract(ODHM) on acetaminophen induced acute liver injury in mice. Methods : In order to investigate the protective effect of ODHM on acute hepatic injury in vivo, ICR mice were pretreated with ODHM, and then treated with acetaminophen(500mg/kg). And the levels of LPO and glutathione(GSH), antioxidative enzyme activities were measured. The levels of LPO were measured by TBA method. And catalase activity was measured as the decrease in hydrogen peroxide absorbance at 240nm on spectrophotometer using 30mM hydrogen peroxide. Superoxide dismutase(SOD) was assayed by recording the inhibition of nitro blue tetrazolium reduction with xanthine and xanthine oxidase. Glutathione peroxidase(GPX) activity was determined by the modified coupled assay developed by Paglia and Lawrence. The reaction was started by addition of 2.2mM hydrogen peroxide as substrate. The change in absorbance at 340nm was measured for 1min on spectrophotometer. Glutathione-S-transferase(GST) activity was assayed with CDNB as substrate and enzyme activity of GST towards the glutathione conjugation of CDNB. And Total SH and GSH levels were measured. Results : In vivo study, LPO levels of acetaminophen treatment group were significantly higher than other groups. This increased level was significantly reduced by ODHM pretreatment. The acetaminophen treatment resulted in a decrease of catalase, GPX, SOD and GST activities. By contrast, ODHM pretreatment markedly increased compare to those of untreated groups. Total SH and GSH levels were reduced by of acetaminophen treatment, and ODHM pretreatment significantly increased GSH levels.