• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.19-20
• /
• 2018

For this study, a test was conducted on the basic polymer property depending on the replacement amount of polymer. The result showed that the flow of slump was increased with the increase of polymer replacement amount and an amount of air entraining. In addition, with a decrease of unit W/B, an amount of bleeding was reduced, and the first and final time for 6% replacement amount was found to be the fastest. This implies that replacement of more than 6% may affect the hydration of cement.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.37-43
• /
• 2002

In recent years, numerous studies have been carried out to find out the possible substitution of PE-coated paperboards used in packaging of watery or oily foods. Accordingly, this study was carried out to obtain the basic data for producing higher functional coating agents for pulp mold by evaluating various kinds of synthetic and natural coating agents on the market. Physical properties of coated paperboards were tested. Conclusions obtained from this study were as follows. AKD and PVA showed higher functions than the other synthetic coating agents, while functions of CMC, Com starch and Oxidized starch were higher than those of other natural coating agents. Based on concentrations, AKD 0.5%, PVA 10%, CMC 1.5%, corn starch 6% and oxidized starch 8% were appeared as the proper concentrations. W3 consider that AKD may be suitable for the storage of higher moisture vegetables and other food, and PVA may be suitable for higher oily fried food.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.633-636
• /
• 1992

The need for more efficient transformer core materials, due to increased recognition by the loss reduction of electric utilities, has spurred the development of amorphous metal usage in transformer. The loss of amorphous core is one third to one fourth that of silicon steel at equivalent inductions 15KG and below. Thus, the substitution of amorphous metal for conventional silicon steel in a transformer core can reduce core loss by 75%. This paper describes the development trend, the manufacturing processes of amorphous core transformer and the characteristics of amorphous core transformer in comparison with those of silicon core transformer.

• BMB Reports
• /
• v.52 no.8
• /
• pp.475-481
• /
• 2019

The evolution of genome editing technology based on CRISPR (clustered regularly interspaced short palindromic repeats) system has led to a paradigm shift in biological research. CRISPR/Cas9-guide RNA complexes enable rapid and efficient genome editing in mammalian cells. This system induces double-stranded DNA breaks (DSBs) at target sites and most DNA breakages induce mutations as small insertions or deletions (indels) by non-homologous end joining (NHEJ) repair pathway. However, for more precise correction as knock-in or replacement of DNA base pairs, using the homology-directed repair (HDR) pathway is essential. Until now, many trials have greatly enhanced knock-in or substitution efficiency by increasing HDR efficiency, or newly developed methods such as Base Editors (BEs). However, accuracy remains unsatisfactory. In this review, we summarize studies to overcome the limitations of HDR using the CRISPR system and discuss future direction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.199-200
• /
• 2023

This paper presents a study on the selection of optimal mix proportions for producing lightweight pre-foam concrete as a substitute for Autoclaved Lightweight Concrete (ALC) without the accelerated curing. The study was conducted using a rapid hardening binder made from by-products of the steel industry as the primary raw material. The experimental results established the optimal mix proportions, which included retarder content, water/binder ratio, foam content, and fiber inclusion amount, for the production of lightweight foam concrete. The optimal mix proportion was determined to have a retarder content at the minimum amount required to secure the working time, W/B of 35%, a foam content limited to 65% or less, and a fiber inclusion amount of 0.05% or less.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.263-268
• /
• 2000

Recently, the recycling of the by-products was attempted to various fields. One of the major industry, the copper manufacturing industry produced a lot slags. in this study, the copper smelting slag was used to use practically application for the aggregate of concrete. To find the optimum mixing ratio of mortar with the copper smelting slag as substitution for sand, the mixing ratio was increased 1:2 to 1:5 step by step and every mixture was contained 5 steps sand substitutive ratio. The substitutive ratio of sand was increased 25% st대 by step from 0% to 100%. The result of this study was shown as follows. 1. In the every mixture, as the substitutive ratio was increased, the flow was decrease 3.64% from 18cm, and the unit content weigth was increased 5.5% in average. 2. The property of the strength was judged that it was more affected W/C and mixing ratio than the copper smelting slag.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.301-303
• /
• 2006

In this study, multilayer piezoelectric transformer were manufactured using the PZN-PMN-PZT ceramic and then the electrical characteristics were investigated. The voltage step-up ratio of multilayer piezoelectric transformer showed the maximum value in the vicinity of 78.16kHz and increased according to the increase of load resistance. When the output impedance coincided with the load resistance, piezoelectric transformer showed the temperature increase of about $20^{\circ}C$ at the output power of 12W. The results, the multilayer transformer manufactured using the low temperature sintered PZN-PMN-PZT ceramics can be stably driven for step-up transformers.

• Speech Sciences
• /
• v.3
• /
• pp.38-49
• /
• 1998

Dysarthrias are a sort of neuromotor disorders because of the weakness of neuromotor controls. They are classified in six types on the basis of Mayo clinic research: flaccid, spastic, ataxic, hypokinetic, hypekinetic and mixed types. Five dysarthria types are investigated in this study. MRI, EMG, neuropathological tests are essential diagnostic processing. Visi-Pitch and Spectrgraphy, CSL are used for assessing dysarthria speech. Maximum phonation time, diadochokinetic rate, Voice Onset Time and substitution rate are the speech evaluation parameters. Maximum phonation time and diadochokinetic rates are the lowest in case of spastic and ataxic dysarthrias. Spastic dysarthria shows the substituted glottalized consonants. However, flaccid, ataxic and hypokinetic dysarthrias show the substituted aspirated consonants. VOT is the longest for hypokinetic dysarthria and the shortest for ataxic dysarthria. Jitter shows higher percentage in comparison with control group. Speech evaluation using experimental phonetic instruments help create on international standardization of speech evaluation for speech disorders.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.610-613
• /
• 1995

The effect of processing parameters such as milling, additives and sintering atmoshpere on the magnetic properties of Mn-Zn ferrite was investigated. The experiment was followed by general ceramic fabrication process and added additives were $CaCO_{3}$, $SiO_{2}$, $V_{2}O_{5}$, $ZrO_{2}$, and $Nb_{2}O_{5}$. The effects of additives could be divided into three categories which were formation ofliquid phase, substitution in lattice and inducing stress. Core loss smong the magnetic properties was dependent mainly on the additives and also correlated with processing parameters. As a result, an optimum condition of preparing process for a high quality Mn-Zn ferrite was suggested by controlling the correlation of each processing parameters.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.241-243
• /
• 2005

This paper describes development of intelligent solid insulated switchgear for next generation distribution line. Nowadays, for switchgear, increased to substitute eco-friendly environment and smart ability. In relation to a project to development of intelligent solid insulated switchgear, a comparison of insulation for substitution insulation medium, to show a composition of intelligent solid Insulated switchgear and valuation on characteristics for each of module.