• Title/Summary/Keyword: Submergence temperature

Search Result 21, Processing Time 0.027 seconds

Evaluation of Environmental Fatigue Strength in Adhesive Bonding of Different Materials (이종재료 접착제 접합부의 환경 피로강도 평가)

  • 임재규;이중삼;윤호철;유성철
    • Journal of Welding and Joining
    • /
    • v.20 no.5
    • /
    • pp.99-105
    • /
    • 2002
  • One of the important advantage of adhesive bonded joint can combine the different materials. The joint that bonded by structural adhesive bond must keep a large force and its strength is affected by some environmental factors such as temperature and submergence time in water. In order to advance the fatigue strength of adhesive bonded joint, mostly put a surface treatment on the surface. This study was researched the effect of air temperature, submergence time, submergence temperature and surface treatment on the fatigue strength. We found that submergence temperature has the most effect and low plasma treatment specimens have the most fatigue strength.

Thermal Reliability Analysis of the Bearing Units in a Centrifugal Pump (원심펌프 베어링 유닛의 열신뢰성 분석)

  • Moon, Jung-Hwan;Moon, Seung-Jae;Lee, Jae-Heon
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.19 no.4
    • /
    • pp.313-320
    • /
    • 2007
  • In this paper, the experimental study has been carried out to investigate the reliability lifetime of two bearing units based on the oil temperature. Measurements for the oil temperature as well as the bearing temperature during normal operation were performed to study the effects of oil viscosity and oil submergence percentages in the two bearing units. The optimal lubrication condition to increase the lifetime of the bearing unit A was found that its viscosity and submergence percentage were VG32 and 25%, respectively. For the bearing unit B, when the oil viscosity and submergence percent were VG32 and 75%, the lubrication condition was the most efficient. Finally, the adjusted rating times of both the bearing units were calculated to be over 28,000 h, which is greater than the minimum adjusted rating times of 25,000 h. Therefore, they satisfied the regulated lifetime of API 610.

Influence of Turbidity of Submerged Water on Photosynthetic Rate of Rice Plants (관수 탁도가 벼 광합성능에 미치는 영향)

  • 강양순;정근식;손양;김재철
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.33 no.4
    • /
    • pp.350-352
    • /
    • 1988
  • This study was carried out to know the influence of turbidity of submerged water on photosynthetic rate of rice plant after water submerging treatment. Rice plants were transplanted in the pot at maximum tillering stage and they were sumberged for 3days at meiotic stage, 20days after transplanting, in the plastic container which had the clear and turbid water temperature adjusted around 24 to $25^{\circ}C$. Photosynthetic rate at 6 hours recovery after submergence was 41.5 to 54.2% compared to the control, but in the case of cultivar 'Nagdongbyeo', it was rapidly increased by 97.3 to 104.6% in the clear water and by 68.6 to 77.5% in the turbid water at 2 to 4 days recovery after submergence. Photosynthetic rates per plants at 6 hours to 4 days recovery after submergence were 128.3 to 245.5 $C_2$ mg.hr.$^{-1}$, in 'Samgamgbyeo' and 71.1 to 162.4 $CO_2$, mgㆍhr.$^{-1}$ in 'Nagdongbyeo' Photosynthetic rate to respiration ratio of rice plant recovery after submergence was lower compared to control plant and it was lower in 'Nagdongbyeo' than that in 'Samgangbyeo'.ngbyeo' than that in 'Samgangbyeo'.gangbyeo'.pos;.

  • PDF

The Effect of Submergence on Phosphorus Adsorption Charcteristics in Soils I. Changes of Adsorption Maximum, Adsorption Equilibrium Constant and Heat of Adsorption (담수처리(湛水處理)가 토양(土壤)의 인산(燐酸) 흡착(吸着) 특성(特性)에 미치는 영향(影響) I. 최대(最大) 흡착량(吸着量), 흡착(吸着) 평형상수(平衡常數) 및 흡착열(吸着熱)의 변화(變化))

  • Kim, Chan-Sub;Yoo, Sun-Ho
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.24 no.2
    • /
    • pp.109-115
    • /
    • 1991
  • This study examines the effect of submergence on phosphorus adsorption characteristics in Gangseo(paddy soil), Yesan(non-cultivated soil), and Jungdong soil(upland soil). The soils were submerged with glucose sol'n at $28^{\circ}C$ for 17 days. After the submergence, the phosphorus adsorption was conducted at three temperatures(5, 25 and $45^{\circ}C$). The phosphorus adsorption maximum($X_m$) and the equilibrium constant(K) were obtained by Langmuir adsorption isotherm, and the heat of adsorption(${\Delta}H$) was calculated by van't Hoff's equiation. Results obtained are as follows ; 1. The amounts of adsorbed P were increased with temperature, but the effects of temperature on rate of P adsorption were very small in all three soils. 2. By submergence, $X_m$ were increased from 500mg P/kg to 850mg P/kg in Gangseo soil, from 1,850mg P/kg to 3,300mg P/kg in Yesan soil, and from 310mg P/kg to 670mg P/kg in Jungdong soil. But the effects of temperature on $X_m$ were very small in all three soils. 3. Submergence decreased K for Gangseo and Yesan soils, but increased for Jungdong soil. Whereas K were increased with temperature in all three soils. 4. By submergence, ${\Delta}H$ for Gangseo soil was greatly increased (from 2.2 Kcal/mole to 3.5 Kcal/mole), whereas that for Yesan soil changed little (from 5.7 Kcal/mole to 5.5 Kcal/mole). It was 4.4 Kcal/mole in submerged Jungdong soil.

  • PDF

Effect of Water Temperature on the Growth of Triops longicaudatus (LeConte) (Notostraca: Triopsidae) (수온이 긴꼬리투구새우(배갑목: 투구새우과)의 생장에 미치는 영향)

  • Kwon, Soon-Jik;Jun, Yung-Chul;Park, Jae-Heung;Won, Doo-Hee;Seo, Eul-Won;Lee, Jong-Eun
    • Journal of Life Science
    • /
    • v.20 no.11
    • /
    • pp.1662-1666
    • /
    • 2010
  • Growth and other biological processes in aquatic organisms are particularly dependent on water temperatures. This study examined the effects of water temperature on the growth of Triops longicaudatus. The influence of water temperature fluctuations was that growth rate was increased at higher temperatures. The mean carapace length was 5.7 (${\pm}2.1$) mm in a water temperature of $20^{\circ}C$ and 7.5 (${\pm}0.5$) mm in a water temperature of $28^{\circ}C$ on the 14th day after submergence. It was 6.9 (${\pm}2.8$) mm in a water temperature of $20^{\circ}C$ and 7.8 (${\pm}2.0$) mm in a water temperature of $28^{\circ}C$ on the 21st day after submergence. The mean carapace length grew rapidly within 14 days after submergence, but increase in carapace length beyond this time was slow. The influence of water depth fluctuations was low as the mean carapace length was 9.3 (${\pm}2.1$) mm under a water depth of 80 mm and 9.5 (${\pm}1.3$) mm under a water depth of 190 mm on the 19th day after submergence. Biomass showed that the carapace length of 5, 10, 16 and 20 mm was a dry-weight of 1.1 (${\pm}0.3$), 18.0 (${\pm}3.7$), 26.0 (${\pm}0.0$) and 52.3 (${\pm}4.0$) mg respectively. The number of eggs increased rapidly with increments in carapace length. The mean number of eggs was 20 (${\pm}0.0$) at a carapace length of 7.0 mm, but at a carapace length of 17.0 mm, the mean number of eggs was 560 (${\pm}0.0$). The results suggested that differences in water temperature accounted for the differences in length of the carapace and the number of eggs.

Experimental Study of Performance and Bubble Pattern of Air-Lift Pumps with Various Tube Diameters and Submergence Ratios (공기부양 펌프의 관직경과 잠수비 변화에 따른 기포 형상과 성능에 관한 실험적 연구)

  • Kim, Seung Hwan;Sohn, Chae Hoon;Hwang, Jun Young
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.37 no.9
    • /
    • pp.837-845
    • /
    • 2013
  • An airlift pump can be used to pump liquids and sediments within itself, which cannot easily be pumped up by a conventional method, by using the airlift effect. This characteristic of the airlift pump can be exploited in a DCFC (Direct Carbon Fuel Cell) so that molten fuel with high temperature may be carried or transported. The basic characteristics of airlift are investigated. A simple system is constructed, where the reservoir is filled with water, a tube is inserted, and air is supplied from the bottom of the tube. Then, water is lifted and its flow rate is measured. Bubble patterns in the tube are observed in a range of air flow rates with the parameters of the tube diameter and submergence ratio, leading to four distinct regimes. The pumping performance is predicted, and the correlation between the supplied gas flow rate and the induced flow rate of water is found.

Molecular Identification and Fine Mapping of a Major Quantitative Trait Locus, OsGPq3 for Seed Low-Temperature Germinability in Rice

  • Nari Kim;Rahmatullah Jan;Jae-Ryoung Park;Saleem Asif;Kyung-Min Kim
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2022.10a
    • /
    • pp.283-283
    • /
    • 2022
  • Abiotic stresses such as high/low temperature, drought, salinity, and submergence directly or indirectly influence the physiological status and molecular mechanisms of rice which badly affect yield. Especially, the low temperature causes harmful influences in the overall process of rice growth such as uneven germination and the establishment of seedlings, which has become one of the main limiting factors affecting rice production in the world. It is of great significance to find the candidate genes controlling low-temperature tolerance during seed germination and study their functions for breeding new rice cultivars with immense low-temperature tolerance during seed germination. In this study, 120 lines of Cheongcheong/Nagdong double haploid population were used for quantitative trait locus analysis of low-temperature germinability. The results showed significant difference in germination under low different temperature conditions. In total, 4 QTLs were detected on chromosome 3, 6, and 8. A total of 41 genes were identified from all the 4 QTLs, among them, 25 genes were selected by gene function annotation and further screened through quantitative real time polymerase chain reaction. Based on gene function annotation and level of expression under low-temperature, our study suggested OsGPq3 gene as a candidate gene controlling viviparous germination, ABA and GA signaling under low-temperature. This study will provide a theoretical basis for marker-assisted breeding.

  • PDF

Analytical Study on the Discharge Transients of a Steam Discharging Pipe (증기방출배관의 급격과도현상에 대한 해석적 연구)

  • 조봉현;김환열;강형석;배윤영;이계복
    • Journal of Energy Engineering
    • /
    • v.7 no.2
    • /
    • pp.202-208
    • /
    • 1998
  • As in the other industrial processes, a nuclear power plant involves a steam relieving process through which condensable steam is discharged and condensed in a subcooled pool. An analysis of steam discharge transients was carried out using the method of characteristics to determine the flow characteristics and dynamic loads of piping that are used for structural design of the piping and its supports. The analysis included not only the steam flow rate but also the flow rates of the air and water which originally exist in the pipe. The analytical model was developed for a uniform pipe with friction through which the flow was discharged into a suppression pool. Including the combinations of system elements such as reservoir, valve and branching pipe lines. The piping flow characteristics and dynamic loads were calculated by varying system pressure, pipe length, and submergence depth. It was found that the dynamic load, water clearing time and water clearing velocity at the water/air interface were dependent not only on the system pressure and temperature but also on the pipe length and submergence depth.

  • PDF

Yield Response of Rice Affected by Adverse Weather Conditions Occurred in 1999 (1999년에 발생한 기상재해 유형별 벼 수량반응조사 연구)

  • Ju Young-Cheoul;Lim Gab-June;Han Sang-Wook;Park Jung-Soo;Cho Young-Cheol;Kim Soon-Jae
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.2 no.1
    • /
    • pp.1-8
    • /
    • 2000
  • The objectives of this study were to investigate weather conditions which induced discolored grains and viviparous germination, and to evaluate yield responses following viviparous germination during mid- and late- ripening stage, the submergence during reproductive growth stage, and lodging in the yellow ripe stage. Weather conditions which caused glume discoloration at heading stage were 21.3-26.4$^{\circ}C$ in average temperature, 75.2-98.4% in relative humidity, 19.3 in transpiration coefficient and 10.8-13.8 m/sec. in wind speed. Yield reduction was 26-27% and 10~17%, respectively, when the glume discoloration rates were 63.2-65.7% and 38.3-45.2%, obviously due to the decrease in percent of fertile grain and ripening ratio. Weather conditions during continuous rain for 7 days were 96% in relative humidity, 18.9$^{\circ}C$ in average temperature, 21.9$^{\circ}C$ in maximum temperature, and 16.8$^{\circ}C$ in minimum temperature, causing the most viviparous germination in Juanbyeo(45.5%), followed by Jinbubyeo(14.5%), Bongkwangbyeo(14.2%), and Obongbyeo(12.6%). Lateral tillers started to occur when the submergence at the depth of 1.5-2 m lasted one day during the reproductive growth stage. The submergence for 2-3 days at 3-4 m of water depth induced 269-571 lateral tillers/m$^2$, supporting 32-52% of the total yield. The rice yield in the paddy fields which were left under the lodging conditions until harvesting was not different compared to that of the paddy fields which were kept upright by tieing them together after lodging, but perfect grain ratio decreased about 9.1% in the transplanting culture and 12.5% in the direct seeding culture on dry paddy field because of the increase in immature grains.

  • PDF

Artocarpus chaplasha: Establishment and Initial Growth Performance at Elevated Temperature and Saline Stresses

  • Rahman, Md. Siddiqur;Al-Amin, M.;Akter, Salena
    • Journal of Forest and Environmental Science
    • /
    • v.28 no.1
    • /
    • pp.12-18
    • /
    • 2012
  • Like any other natural resources, forest flora may experience the extreme threat of elevated temperature and saline water submergence at different stages of their lives i.e. from germination to maturity due to climate change effects. The overall aim of the study was to measure the effect of higher temperatures along with saline water irrigation on survival and initial growth during seedling stage of Artocarpus chapalasha. The experiment was conducted in temperature- humidity-photoperiod regulated plant growth chamber during stipulated period to measure the growth performance of randomly selected seedlings. Within three different elevated temperatures viz. $30^{\circ}C$, $32^{\circ}C$ and $34^{\circ}C$, the seedlings were given three different saline conditions such as 0.5 g/L, 1.5 g/L and 2.5 g/L NaCl concentrations. Results found from the experiment was that, seedlings of Artocarpus chaplasha reared at different temperatures and saline water treatments showed stunted growth than reared at existing outdoor temperature ($26.31^{\circ}C$) irrigated with regular fresh water. Seedling growth at three different parameters such as height, collar diameter and number of leaves showed that with increasing temperature individuals respond negatively to increasing saline condition. The seedling's growth occurred at every day in height, collar diameter and leaf. However, growth rate reduced later during the observation. The combined effect of high salinity and higher elevated temperature results in seedling mortality. Therefore, Artocarpus chaplasha may not thrive at higher temperature and salinity intrusion at its early growing period in plantation and natural forest areas.