• 한국산림과학회지
• /
• 제106권3호
• /
• pp.275-287
• /
• 2017

본 연구는 두타산 일대 산림식생구조를 밝히고, 식생유형분류와 입지환경인자와의 상관관계 파악을 목적으로 수행되었다. 2016년 6월부터 10월까지 Z-M학파의 식물사회학적인 방법에 의해 식생조사를 수행하여 총 46개소의 식생자료를 획득하였고, 이 자료를 토대로 식생분류를 실시하였다. 그 결과, 최상위 수준에서 신갈나무군락군으로 분류되었으며, 신갈나무군락군은 철쭉군락과 거제수나무군락의 2개 군락으로 분류되었다. 철쭉군락은 동자꽃군과 철쭉전형군 2개의 군으로 세분되었고 동자꽃군은 박새소군과 동자꽃전형소군 2개의 소군으로 세분되었다. 거제수나무군락은 들메나무군과 박달나무군 2개 군으로 세분되었다. 들메나무군은 병꽃나무소군과 승마소군 2개 소군으로 세분되었다. 두타산 일대 산림식생은 총 6개의 식생단위, 14개의 종군단위, 2쌍의 대별종군으로 분류되었다. 수관층위구조의 분석결과, 식생단위별로 임관의 계층이 서로 겹치지 않는 단조로운 구조인 박새소군(식생단위 1), 동자꽃전형소군(식생단위 2), 병꽃나무소군(식생단위 4)과 겹치는 복잡한 구조인 철쭉전형군(식생단위 3) 승마소군(식생단위 5), 박달나무군(식생단위 6)이 나타났다. 승마소군(식생단위 5)의 수직적 계층구조가 가장 발달하였으며, 박달나무군(식생단위 6)은 초본층 식피율이 가장 낮았다. 일치법에 의한 식생단위와 환경요인과의 상관관계를 보면, 해발 1,100 m, 사면 중부, 경사 $20^{\circ}$, 암석노출도 20%, 교목층 DBH 30 cm를 기준으로 철쭉군락(식생단위 1~3)과 거제수나무군락(식생단위 4~6)이 분류되었다. CCA 분석 결과 철쭉군락(식생단위 1~3)은 해발, 지형과 정의 상관관계, 거제수나무군락(식생단위 4~6)은 부의 상관관계 분포경향이 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• 한국임상약학회지
• /
• 제33권4호
• /
• pp.278-289
• /
• 2023

Background: Linezolid has been widely used in the treatment for multidrug-resistant tuberculosis. However, there are limitations to use it such as long treatment, because of related side effects, even adequate treatment period has been needed for remission of multidrug-resistant tuberculosis (MDR-TB). Method: The meta-analysis was performed based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criteria. To choose literatures, systematic literature reviews were conducted with databases of PubMed, Web of Science, and EMBASE. Results: Efficacy and safety of Linezolid were determined by 85% (95% CI=79~89%, p<0.05) in the sputum culture conversion and 55% (95% CI=45~64%, p<0.01) in side effects related to linezolid, respectively. In addition, I² was estimated by 72%. In the subgroup analysis, efficacy and safety by dose and region were analyzed. In the subgroup analysis, compared with the linezolid dose in groups greater than 600 mg/day and less than 600 mg/day, this study showed 85% (95% CI 79~90%, p>0.05) in 206 patients and 82% (95% CI 73~89%, p<0.05) in 297 patients, respectively. Also, in the subgroup analysis, adverse effects caused by linezolid occurred more than 50% of treated patients. Conclusion: Therapeutic efficacy of linezolid for MDR-TB patients was confirmed regardless of the initial dose of linezolid, especially for sputum culture conversion and it was recommended that the dose of linezolid has been more effective below 600 mg/day. However, it should be necessary to closely monitored for safety issues since serious side effects possibly occurred by administration of long period treatment.

• 한국산림과학회지
• /
• 제80권1호
• /
• pp.42-53
• /
• 1991

1. 경상북도(慶尙北道) 상주군(尙州郡)과 충청북도(忠淸北道) 영동군(永同郡)의 경계(境界)를 이루는 백화산(白華山) 일대(一帶)에 대하여 식물사회학적(植物社會學的) 삼림군락분류(森林群落分類)와 소산식물상(所産植物相)의 조사(調査)를 행(行)하였다. 삼림식생(森林植生)은 자연림(自然林)으로 계곡부(溪谷部)와 산정부(山頂部)의 일부지역(一部地域)에 느티나무와 달피나무가 소규모(小規模)의 잔재림(殘在林)으로 분포(分포(布))하고 있지만 거의 전지역(全地域)이 이차림(二次林)이나 식림(植林)과 같은 대상식생(代償植生)으로 구성(構成)되어 있다. 2. 백화산(白華山) 일대(一帶)의 삼림군락(森林群落)은 신갈나무, 쇠물푸레 등(等)이 특징(特徵)지우는 신갈나무 쇠물푸레군락(群落)(Table 1 : I)의 산지림(山地林)과 물푸레나무, 고로쇠나무 등(等)이 특징(特徵)지우는 물푸레나무-고로쇠나무군락(群落)(Table 1 : II)의 계곡림(溪谷林)의 2개(個) 상급식생단위(上級植生單位)로 크게 구분(區分)되었으며 이들의 하급식생단위(下級植生單位)는 다음과 같다. I. 산지림(山地林)(I-A. 당단풍-지리대사초군(群), I-B. 소나무군(群) : I-B-a. 전형소군(典型小群), I-B-b. 철쭉나무소군(小群)) II. 계곡림(溪谷林)(II-A. 당단풍군(群), II-B. 느티나무군(群) : II-B-a. 전형소군(典型小群), II-B-b. 비목나무소군(小群), II-C. 졸참나무-굴피나무군(群) : II-C-a. 전형소군(典型小群), II-C-b. 비목나무소군(小群)) 3. 삼림군락(森林群落)의 수직분포(垂直分布)를 조사(調査)한 결과(結果), 산지림(山地林)은 해발(海拔) 600m를 경계(境界)로 상부(上部)는 당단풍-지리대사초군(群)(I-A)과 전형소군(典型小群)(I-B-a), 하부(下部)는 철쭉나무소군(小群)(I-B-b)이 주로 분포(分布)하고 있었으며, 해발(海拔) 600m이하(以下)에서 주로 발달(發達)하는 계곡림(溪谷林)은 해발(海拔) 350m를 경계(境界)로 상부(上部)는 당단풍군(群)(II-A)과 느티나무군(群)(II-B), 하부(下部)는 졸참나무-굴피나무군(群)(II-C)이 분포(分布)하고 있었다. 4. 군락(群落)의 잠재우점성(潛在優占性)을 검토(檢討)한 결과(結果), 산지림(山地林)은 중부(中部) 이상(以上)에서는 신갈나무가 당분간(當分間) 도중극상(途中極相)을 중부(中部), 이하(以下)는 서어나무가 기후적(氣候的) 극상(極相)을 계곡림(溪谷林)은 인위적(人爲的) 영향(影響)을 배제(排除)하면 잔존종(殘存種)과 치묘(稚苗) 및 치수(稚樹)의 생육상태(生育狀態)로 보아 느티나무와 물푸레나무가 지형(地形) 및 토지적(土地的) 극상(極相)을 이루는 가운데 고로쇠나무, 까치박달, 비목나무 등(等)이, 국소적(局所的)으로 혼생(混生) 우점(優占)할 것으로 사료(思料)되었다. 5. 일치법(一致法)에 의해 산지림(山地林)과 계곡림(溪谷林)의 구분요인(區分要因)을 검토(檢討)한 결과(結果), 해발(海拔)보다는 지형(地形)에 의해 좌우(左右)되었다. 6. 백화산(白華山) 일대(一帶) 현존식물상(現存植物相)을 조사(調査)한 결과(結果), 소산식물(所産植物)은 총(總) 709종류(種類)로 108과(科), 371속(屬), 613종(種), 2아종(亞種), 88변종(變種) 및 6품종(品種)이었다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.813-821
• /
• 2021

The relationship between capital structure policy and firm value is interesting to study because the concept of capital structure was initiated by Modigliani and Miller who claimed that the company's capital structure is not a factor in its value. They asserted that linking leverage with firm value was irrelevant. Therefore, this study examined the role of growth opportunities as a moderating variable for the relationship between capital structure and firm value. The population of this study is 300 companies from the manufacturing sector that are listed on the Indonesia Stock Exchange (IDX) for the period 2015-2018. To analyze the data, the subgroup moderation method was employed by dividing the data into two parts: companies with high growth opportunities and companies with low growth opportunities. The results revealed that capital structure had a direct positive effect on firm value. Furthermore, the test results of the two regression models of growth opportunities as the moderating variable are very interesting. It was found that for companies with high growth opportunities, the use of debt had a negative effect on firm value, and conversely, the use of debt had a positive effect on firm value for companies with low growth opportunities. The statistical F-test results proved that growth opportunities are a moderating variable for the relationship between capital structure and firm value.

• Journal of Oral Medicine and Pain
• /
• 제18권2호
• /
• pp.121-130
• /
• 1993

Mandibular rest position is very essential position because in that position, masticatory muscularture can be reciprocally coordinative and unstrained. So obtaining a good ability to establish and maintain rest position in non-functioning state is mandatory for treatment of patient with craniomandibular disorders. In general, many types of mandibulr movement exercise start from rest position and use the sense of muscle relearning, that is, muscle smoothness and relaxation, throughout the exercise period. In this study, 44 normal subjects for control group and 37 patients with craniomandibular disorders for experimental group participated and they were classified into 3 subgroups, respectively. One method to guide mandibular rest position was used for one subgroup, so theree methods were used for this study, 1)self-guided rest position without any education, 2) guided by Rocabado's tongue rest position, 3) guided through swallowing after Dawson's centric relation. To record electromyographic activity, Bioelectric processor EM2 (Myotronics, U.S.A.) was used. The numbers of sessions from start to stable resting electromyographic level and muscle activities in stable state were recorded and two recordings which were first and second, 3 days after first recording, were done, The data were processed with SPSS/PC+package. The obtained results were as follows : 1. Mean number of sessions in second recording were fewer than those in first recording in both groups. In comparison among 3 subgroups, mean number of sessions of subgroup guided through Dawson's method were fewer than those of other groups though it is not statistically significant. 2. There was a difference of mean number of sessions between control and experimental group in first recording, but in second recording there was no difference in any cases. 3. Mean value of muscle activity were generally not different without regard to group and method if once come to stable resting position level. Mean value of muscle activity of guided subgroups showed a tendency of decreasing in second recording than in first recording. However, in self-guided subgroup there was a inconsistent pattern. 4. The amounts of change in session number from first to second recording in control group were fewer than those in experimental group.

• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.112-124
• /
• 1997

According to extensive use of composite resin which have superior esthetic property, every effort on improving bonding strength between a tooth and composite resin has been continued. Acid etching technique is a method that micro-etches the tooth surface which provides bonding with composite resin possible. Recently, there were several reports that mechanical treatment obtained from air-abrasion can provide similar bonding strength with acid etching technique. So, this experimental study was designed to compare the shear bonding strength between using air-abrasion technique and using acid etching technique. Initially, bovine teeth were divided into enamel and dentin experimental groups. Respectively each group was categorized into three subgroups. One subgroup was acid etched with 35% phosphoric acid, then bonded with composite resin. The other subgroup was air-abraded with $50{\mu}m$ $Al_2O_3$ particles sprayed with 160psi air pressure using air abrasion unit(KCP-1000, A.D.T., U.SA), and composite resin was bonded. In another subgroup, composite resin was bonded after acid etching following air-abrasion. So, enamel experimental groups were made of E1 (acid etched only), E2(air-abraded only), E3(acid etched following air-abraded), and dentin experimental groups were made of D1(acid etched only), D2(air-abraded only), D3(acid etched following air-abraded). Each subgroup had 10 specimens. Dentin bonding system(Scotchbond Multi-purpose, 3M Co., U.S.A.) and composite resin(Z-100, 3M Co., U.S.A.) were applied on treated surface using 5mm diameter gelatin capsule as manufacturer's direction. After 1200 times thermocycling between $5^{\circ}C$ and $55^{\circ}C$, shear bond strength was measured in 5mm/min crosshead speed with Instron(Instron Co., U.S.A.), and also treated enamel and dentin were observed with SEM(JEOL Co., Japan). The following results were obtained: 1. In the enamel experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 2. In the dentin experimental groups, acid etched following air-abraded group had highest shear bond strength, but there was no significant difference compared to acid etched group. Air-abraded only group had lowest shear bond strength, and there was significant difference compared to the rest of groups. 3. In the SEM study, air-abraded enamel and dentin had irregular and rough surfaces.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2000년도 춘계정기학술대회 e-Business를 위한 지능형 정보기술 / 한국지능정보시스템학회
• /
• pp.475-478
• /
• 2000

Recently encryption algorithms based on difficulties of factorization have been used with popularization. Prime number factorizations are progressed rapidly. In this paper, characteristics of elliptic curve are analyzed and generation of elliptic curves suitable for prime number factorization is discussed.

• 대한수학회보
• /
• 제43권1호
• /
• pp.119-123
• /
• 2006

Let G be a symmetric group. In this paper we describe a method that for a certain irreducible character X of G it finds a subgroup H such that the restriction of X on H has a linear constituent with multiplicity one. Then using a well known algorithm we can construct a representation of G affording X.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.