• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.558-572
• /
• 2018

In addition to its modular nature, a Hybrid Modular Multilevel Converter (HMMC) assembled from half-bridge and full-bridge sub-modules, is able to block DC faults with a minimum number of switching devices, which makes it attractive for high power applications. This paper introduces a control strategy based on the Root-Least Square (RLS) algorithm to estimate the capacitor voltages instead of using direct measurements. This action eliminates the need for voltage transducers in the HMMC sub-modules and the associated communication link with the central controller. In addition to capacitor voltage balancing and suppression of circulating currents, a fault tolerant control unit (FTCU) is integrated into the proposed strategy to modify the parameters of the HMMC controller. On advantage of the proposed FTCU is that it does not need extra components. Furthermore, a fault detection unit is adapted by utilizing a hybrid estimation scheme to detect sub-module faults. The behavior of the suggested technique is assessed using PSCAD offline simulations. In addition, it is validated using a real-time digital simulator connected to a real time controller under various normal and fault conditions. The proposed strategy shows robust performance in terms of accuracy and time response since it succeeds in stabilizing the HMMC under faults.

• Archives of design research
• /
• v.16 no.2
• /
• pp.111-120
• /
• 2003

This paper shows a study on a design method and its process for personalization of the industrial fabricated products, and a unit construction system design as its result. Hence this study is starting at a point, the meaning of the personalization in the industrial society to make dear, the using process to analysis with a systematic approaching method and the system of the using process to define. The system of the using process is related in the functions of the industrial product. Therefore a unit which makes up the system of the using process is defined with the technical system theory of the industrial product, and then a design of the system that is made of that units is clarified as a open system. And the propriety and the boundary of the unit construction system design is cleared up by its practical experiment with the personal computer.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.229-234
• /
• 2002

Under the hostile influence of the extreme space environmental conditions due to the deep space and direct solar flux, the thermal control in space applications is especially of major importance. There are tight temperature range restrictions for electro-optical elements while on the other hand there are low power consumption requirements due to the limited energy sources on the spacecraft. So, we usually have strong requirement of thermal and power control module in space applications. In this paper, the design concept of a thermal and power control module in the MSC(Multi-Spectral Camera) system which will be a payload on KOMPSATII is described in terms of H/W & S/W. This thermal and power control module, called THTM(Thermal and Telemetry Module) in MSC, resides inside the PMU(Payload Management Unit) which is responsible for the proper management of the MSC payload for controlling and monitoring the temperature insides the EOS(Electro-Optic System) and gathering all the analog telemetry from all the MSC sub-units, etc. Particularly, the designed heater controller has the special mode of "duty cycle" in addition to normal closed loop control mode as usual. THTM controls heaters in open loop according to on/off set time designed through analysis in duty cycle mode in case of all thermistor failure whereas it controls heaters by comparing the thermistor value to temperature based on closed loop in normal mode. And a designed THTM provides a checking and protection method against the failure in thermal control command using the test pulse in command itself.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.16-23
• /
• 2012

At present, the significance of a new manufacturing system that can shift from 'mass production' and consider life cycles of a product is pointed out and extremely expected. In such a situation, it is recognized that the modular design, often called 'unit design,' is the important design methodology which realizes the new production system enabling 'cost reduction,' 'flexible production of a multi-functional artifact,' 'settlement of an environmental issue,' and so on. A module (unit) of a product is generally defined as 'the parts group made into the sub-system from a certain specific viewpoint.' So far, there have been many researches related to the modular design. However, they are often limited to a certain viewpoint (objective). This paper proposes a simple but effective method for multi-objective modular design. In the proposed method, a new design metric, called similarity index, is proposed to evaluate the modular design candidates from the multiple viewpoints.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.1-6
• /
• 1994

A computer system supporting conceptual design is required to have not only a design model for creative works but also flexibility to cope with changing environments. In this research, a new conceptual design system was developed by expanding functions of existing systems. The modules of the system were maintained to have independency so that each unit module could be executed alone. The adaptable conceptual design system based on the super-application concept which control each module in high level was developed using UNIX C Shell of SUN SPARC workstation.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.493-496
• /
• 2005

The PMU (Payload Management Unit) in MSC (Multi-Spectral Camera) is the main subsystem for the management, control and power supply of the MSC payload operation. The PMU shall handle the communication with the BUS (Spacecraft) OBC (On Board Computer) for the command, the telemetry and the communications with the various MSC units. The PMU will perform that distributes power to the various MSC units, collects the telemetry reports from MSC units, performs thermal control of the EOS (Electro-Optical Subsystem), performs the NUC (Non-Uniformity Correction) function of the raw imagery data, and rearranges the pixel data and output it to the DCSU (Data Compression and Storage Unit). The BUS provides high voltage to the MSC. The PMU is connected to primary and redundant BUS power and distributes the high unregulated primary voltages for all MSC sub-units. The PSM (Power Supply Module) is an assembly in the PMU implements the interface between several channels on the input. The bus switches are used to prevent a single point system failure. Such a failure could need the PSS (Power Supply System) requirement to combine the two PSM boards' bus outputs in a wired-OR configuration. In such a configuration if one of the boards' output gets shorted to ground then the entire bus could fail thereby causing the entire MSC to fail. To prevent such a short from pulling down the system, the switch could be opened and disconnect the short from the bus. This switch operation is controlled by the BUS.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Speech Sciences
• /
• v.11 no.3
• /
• pp.143-156
• /
• 2004

In this paper, we implemented a vocabulary-independent speech recognizer using the TMS320VC33 DSP. For this implementation, we had developed very small-sized recognition engine based on diphone sub-word unit, which is especially suited for embedded applications where the system resources are severely limited. The recognition accuracy of the developed recognizer with 1 mixture per state and 4 states per diphone is 94.5% when tested on frequently-used 2000 words set. The design of the hardware was focused on minimal use of parts, which results in reduced material cost. The finally developed hardware only includes a DSP, 512 Kword flash ROM and a voice codec. In porting the recognition engine to the DSP, we introduced several methods of using data and program memory efficiently and developed the versatile software protocol for host interface. Finally, we also made an evaluation board for testing the developed hardware recognition module.

• Journal of the Korean earth science society
• /
• v.30 no.1
• /
• pp.96-110
• /
• 2009

The ESE (Earth Systems Education) teaching module was developed to teach an "Earth and Star" unit for the 8th grade (aged 14) students. The planet remodeling activity was developed as a sub-ESE teaching module. The main point of this activity was that students were supposed to remodel planets for life to live on. The purpose of this study was to visualize students' thought and to interpret their understandings through their drawings and writings. A framework of analysis with four categories was designed and applied to analyze students' cognitive structure. In order to explore students' cognitive contents, the analyzing factors were classified into two domains: subsystems of the earth systems and use of science & technology. Results revealed via the planet remodeling activity that students' cognitive characteristics were impacted by ESE activities such as Earth literacy.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.120-130
• /
• 2021

Recently, the government is reinforcing safety management at construction sites to prevent safety accidents in construction works, and the safety management plan of workers is an important situation. Meanwhile, modular construction is expected to be gradually expanded to middle and high-rise buildings, but active measures to ensure worker safety are insufficient. This study is a preliminary study of the development of a checklist for preventive worker safety management. The purpose of this study is to derive a checklist classification system for the safety management of workers in the field of modular construction by preceding studies, case analysis, and expert advisory opinions. The classification system consists of large categories of factory manufacturing, transportation, and on-site construction, and the sub-system consists of six sub-classes: foundation work, frame work, modular frame installation work, finishing work, and facility work. Among them, the sub-classification of modular frame installation work consists of 12 unit works, centering on module lifting and assembly module work, which are the main construction processes. And the classification system reflects the three main management factors and contents for defined safety management. It is expected that the research results of this study can contribute to efficient safety management at the modular construction site.