• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.550-553
• /
• 1986

This paper presents a procedure for the time-scale separation and a design method for the sub-optimal composite regulator and Kalman filter of the large-scale discrete stochastic system with two time-scale properties. Provided that the fast sub-system is asymptotically stable, the reduced-order regulator and Kalman filter for the slow sub-system with dominant modes is designed as a sub-optimal regulator for the system.

• Smart Structures and Systems
• /
• v.32 no.6
• /
• pp.383-391
• /
• 2023

Energy harvesting in trams may become a prevalent source of passive energy generation due to the high density of vibrational energy, and this may help power structural health monitoring systems for the trams. This paper presents a broadband vibrational energy harvesting device design that utilizes a varied frequency from a tram vehicle using a 2 DOF vibrational system combined with electromagnetic energy conversion. This paper will demonstrate stepwise optimization processes to determine mechanical parameters for frequency tuning to adjust to the trams' operational conditions, and electromagnetic parameters for the whole system design to maximize power output. The initial optimization will determine 5 important design parameters in a 2 DOF vibrational system, namely the masses (m₁, m₂ (and spring constants (k₁, k₂, k₃). The second step will use these parameters as initial guesses for the second optimization which will maintain the ratios of these parameters and present electrical parameters to maximize the power output from this system. The obtained values indicated a successful demonstration of design optimization as the average power generated increased from 1.475 mW to 17.44 mW (around 12 times).

• Structural Engineering and Mechanics
• /
• v.75 no.3
• /
• pp.377-387
• /
• 2020

Modern long-span floor system typically possesses low damping and low natural frequency, presenting a potential vibration sensitivity problem induced by human activities. Field test and numerical analysis methods are available to study this kind of problems, but would be inconvenient for design engineers. This paper proposes a simplified method to determine the acceleration amplitudes of long-span floor system subjected to walking or running load, which can be carried out manually. To theoretically analyze the acceleration response, the floor system is simplified as an anisotropic rectangular plate and the mode decomposition method is used. To facilitate the calculation of acceleration amplitude a_P, a coefficient α_wmn or α_Rmn is introduced, with the former depending on the geometry and support condition of floor system and the latter on the contact duration t_R and natural frequency. The proposed simplified method is easy for practical use and gives safe structural designs.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.57-64
• /
• 2020

The water-gas shift reaction for the compact reformer was carried out at a gas hourly space velocity of 72,152 h^-1 over the Cu-Nb-CeO₂ catalysts prepared by co-precipitation method. In order to investigate the effect of Nb₂O₅ promotion over a Cu-CeO₂ catalyst, the Nb₂O₅ loading amount was systematically changed from 0 to 5 wt.%. Among the prepared catalysts, the Cu-Nb-CeO₂ (1%) catalyst showed the highest catalytic activity (CO conversion=61% at 400℃) as well as 100% CO₂ selectivity. The high activity and stability of Cu-Nb-CeO₂ (1%) catalyst are correlated to high Brunauer-Emmett-Teller surface area, small metallic Cu crystallite size, and enhanced redox property.

• Clean Technology
• /
• v.27 no.4
• /
• pp.367-371
• /
• 2021

The oxy-combustion system is one of the carbon recovery and storage technologies (CCS: Carbon capture & storage) that performs coal combustion using pure oxygen and recirculated flue gas. This is a technology that facilitates storage of carbon dioxide by generating an exhaust gas consisting of only carbon dioxide without a process of separating carbon dioxide and nitrogen when coal is burned using pure oxygen and recirculated flue gas mixture instead of a conventional air combustion system that produces carbon dioxide and nitrogen mixed exhaust gas. In this study, the characteristics of generated NO and SO₂ as atmospheric pollutants during oxy-combustion were examined using O₂/CO₂ mixed simulation gas. The reaction temperature was varied from 900 ℃ to 1200 ℃ and oxygen partial pressure was varied from 30% to 50%. The results showed that NO and SO₂ concentrations in flue gas increased as the oxygen concentration and the reaction temperature in the furnace increased. The partial pressure of CO₂ in flue gas also increased as the oxygen concentration and the reaction temperature in the furnace increased. As a results of comparing NO production of 30% O₂/CO₂ oxy-combustion with air combustion, NO in flue gas increased with reaction temperature in both experiments and NO of oxy-combustion was 40 ~ 80 ppm lower than that of air combustion.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.402-408
• /
• 2021

We are designed the delivery constitution technique that is to be measure the safe RFID statusof thewireless delivery system level (WDSL) on the delivery system tracking system. The delivery system level condition by the delivery system tracking system is organized with the RFID system. As to inspection a wireless network of the wireless network, we are found of the delivery value with wireless network by the upper take form. The concept of delivery system level is organized the reference of wireless level for delivery signal by the delivery RFID tracking system. Further, symbolizing a safe deliveryof the WDSL of the medium-minimum interval of the RFID tracking system, and the delivery wireless network RFID that was the delivery value of the far delivery of the DSTS-FA-_φMED-MIN with 5.80±1.20 units, that was the delivery value of the convenient delivery of the DSTS-CO-_φMED-MIN with 4.06±(-0.04) units, that was the delivery value of the flank delivery of the DSTS-_φMED-MIN with 0.91±0.07 units, that was the delivery value of the vicinage delivery of the DSTS-VI-_φMED-MIN with 0.18±(-0.03) units. The RFID will be to look into at the safe of the RFID tracking systemwith wireless network bythe delivery system level on the WDSL that is supply the wireless tracking system by the delivery system level system. We will be possible make to curb of a tracking system that to put the wireless signal and to use of the delivery data of RFID level by the delivery system.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.53-58
• /
• 2020

Korea Electric Power Corporation (KEPCO) uses large amount of SF₆, one of the potent greenhouse gases, in electric equipment for electrical insulation. KEPCO is developing SF₆ recovery and purification technology to minimize the release of SF₆ into the environment, to secure certified emission reduction, and to save purchase cost of new SF₆ by reusing the refined SF₆. A prototype SF₆ purification system using cryogenic solidification technology has been built in demonstration scale. To evaluate the feasibility of the commercialization, the system has been operated to purify large amount of used SF₆ in a long-term operation and the performance has been economically evaluated. The system was stable enough for commercial operation such that it was able to purify 5.4 tons of used SF₆ from power transmission equipment in 2-month operation. Over 99% of the SF₆ was recovered from the used gas and the purity of the purified gas was over 99.7 vol%. The operation cost, which is the cost of refrigerant (liquid nitrogen), electricity and labor, per kilogram of purified SF₆ was 6,526 KRW. Considering the price of new SF₆ in Korea is about 15,000 KRW per kilogram this year, about 56% of the purchase cost can be saved.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.1
• /
• pp.32-40
• /
• 2024

The aim of this research was to apply a method designed to derive the factors influencing total ammonia removal when operating an additional pretreatment system at Aquaponics. The Box-Behnken method, among response surface analysis methods was used to characterize and determine the optimal nitrification conditions when operating the pretreatment system. Among the mathematically and statistically calculated prediction equations, the total ammonia nitrogen concentration Y1 measured on day 8 was derived as Y₁=-195.8+2.23X₁+42.9X₂+47.5X₃+0.1856X₁²-1.380X₁X₂-1.770X₁X₃, and the time taken to reach the maximum total ammonia nitrogen concentration during the experiment period was derived as Y₂=271-5.04X₁+60.5X₂-64.8X₃+0.1654X₁²+6.54X₃²-0.600X₁X₃-9.00X₂X₃. The coefficients of determination of the regression models of Y₁ and Y₂ were 93.99% and 94.46%, respectively. The modified coefficients of determination were also high, at 89.48% and 88.91%, respectively. The prediction coefficients of determination of Y₁ and Y₂, were 70.68% and 62.11%, respectively, which was relatively lower than that of Y1, but still indicated a reliable prediction performance.

• Journal of Magnetics
• /
• v.9 no.1
• /
• pp.1-4
• /
• 2004

Three successive phase transitions in bis-n-octhylammonium hexachlorostannate, $(n-C_8H_{17}NH_3)_2SnCl_6$, were studied by means of the ^1H nuclear magnetic resonance linewidth and spin-lattice relaxation measurements. Unlike the compounds with longer hydrocarbon chains, the order-disorder and conformational nature were found to coexist in the phase transitions.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.53-56
• /
• 2004

Recently the interferometric synthetic aperture radiometer with sub-Y-type antenna array was suggested to improve the spatial resolution than that of conventional Y-type with the same number of antenna elements. The sub-Y-type performance has been reported under a point source target. In this paper, the performance of sub-Y-type is evaluated under contiguous objects. The angular resolution of sub-Y-type with 52 antennas was compared with that of Y-type with the 40 antennas. The images of sub-Y -type and Y-type array were simulated under the contiguous objects. The sub-Y-type showed higher resolution than Y-type in the simulation and experiments. The sub-Y-type has high spatial resolution than Y-type in case of contiguous source as well as single point source.