• 한국재료학회지
• /
• 제12권4호
• /
• pp.269-273
• /
• 2002

The NASICON solid electrolyte films, $Na_{1+x}Zr_2Si_xP_{3-x}O_{12}$(1.5< x < 2.3), was prepared from ceramic slurry by modified doctor-blade process. The NASICON solid electrolyte and fabricated sensors, Pt-electrode/NASICON/Carbonate$(Na_2CO_3-K_2CO_3CaCO_3\; system)$ electrode, were investigated to measure phase, microstructure and e.m.f variation for sensing $CO_2$ concentration. The uniform grain size of $2-4{\mu}m$ and major phase of sodium zirconium silicon phosphate phase, $Na_{1+x}Zr_2Si_xP_{3-x}O_{12}$was identified with X-ray diffraction patterns and scanning electron microscopy, respectively. The Nernst's slope of 84 mV/decade for $CO_2$ concentration from 500 to 8000 ppm was obtained at operating temperature of $400^{\circ}C$.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.104-108
• /
• 2018

Grain-growth behavior in the $95Na_{1/2}Bi_{1/2}TiO_3-5BaTiO_3$ (mole fraction, NBT-5BT) system has been investigated with the addition of $Na_2CO_3$. When $Na_2CO_3$ is added to NBT-5BT, the growth rate is higher than desired and grains are already impinging each other during the initial stage of sintering. The grain size decreases as the sintering temperature increases. With the addition of $Na_2CO_3$, a liquid phase infiltrates the interfaces between grains during sintering. The interface structure can be changed to be more faceted and the interface migration rate can increase due to fast material transport through the liquid phase. As the sintering temperature increases, the impingement of abnormal grains increases because the number of abnormal grains increases. Therefore, the average grain size of abnormal grains can be decreased as the temperature increases. The phenomenon can provide evidence that grain coarsening in NBT-5BT with addition of $Na_2CO_3$ is governed by the growth of facet planes, which would occur via mixed control.

• 대한통합의학회지
• /
• 제11권2호
• /
• pp.169-179
• /
• 2023

Purpose : Although human periodontal ligament stem cells (hPDLSCs) are a supportive factor for tissue engineering, oxidative stress during cell culture and transplantation has been shown to affect stem cell viability and mortality, leading to failed regeneration. The aim of this study was to evaluate the antioxidant and protective effects against cell damage of celecoxib, a selective cyclooxygenase-2 (COX-2) inhibitor, and the antioxidant signal of hPDLSCs in H₂O₂-induced oxidative stress. Methods : To induce oxidative stress in cultured hPDLSCs, H₂O₂ was used as an exogenous reactive oxygen species (ROS). Dose-dependent celecoxib (.1, 1, 10, or 100 µM) was administered after H₂O₂ treatment. WST-1 assay was used to assess cell damage and western blot was used to observe antioxidant activity of hPDLSCs in oxidative stress. Immunohistochemistry was performed for inverting the localization of the SOD and Nrf2 antibody. Results : We found that progressive cell death was induced in hPDLSCs by H₂O₂ treatment. However, low-dose celecoxib reduced H₂O₂-induced cellular damage and eventually enhanced the SOD activity and Nrf2 signal of hPDLSCs. Oxidative stress-induced morphological change in hPDLSCs included lowered the survival and number of spindle-shaped cells, and shrinkage and shortening of cell fibers. Notably, celecoxib promoted cell survival function and activated antioxidants such as SOD and Nrf2 by positively regulating the cell survival signal pathway, and also reduced the number of morphological changes in hPDLS. Immunohistochemistry results showed a greater number of SOD- and Nrf2-stained cells in the celecoxib-treated group following oxidative stress. Conclusion : By increasing SOD and Nrf2 expression at the antioxidant system, the findings suggest that celecoxib enhanced the antioxidative ability of hPDLSCs and protected cell viability against H₂O₂-induced oxidative stress by increasing SOD and Nrf2 expression in the antioxidant system.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.165-171
• /
• 2022

The SiO₂/TiO₂ multilayer thin films used for narrow band pass filter were fabricated using E-beam evaporation method. The narrow band pass filter was used to enhance the resolution of spectroscopy and sensor applications with near infrared (NIR) light source. The narrow band pass filter with multilayer thin films were designed with Essential Macleod program. The multilayers of SiO₂/TiO₂ with 32 layers were deposited on the silicon encapsulation of IR with peak wavelength (λ_p) of 660 nm and NIR LEDs with λ_p of 830 nm, 880 nm, and 955 nm. After NIR light passed through the narrow band pass filter, the full width of half maximum of 33.4~48.6 nm became narrow to 20~24 nm owing to the absorption of photons with short or long wavelength of designed band of 20 nm. The SiO₂/TiO₂ band pass filter fabricated in this study can be used for sensor, optoelectronics, and NIR spectroscopy applications.

• 대한원격탐사학회지
• /
• 제37권6_2호
• /
• pp.1859-1867
• /
• 2021

본 연구는 부산지역의 봄철과 여름철 대기 중 미세먼지(particulate matter, PM) 농도 및 빗물 수질을 정량화하고 다변량 통계분석을 이용하여 계절(봄, 여름) 특성에 따른 대기 중 PM 농도가 빗물 수질에 미치는 영향을 평가하였다. 연구기간(2020년 3월-8월)동안 기상청 AWS (automatic weather system)에서 측정된 대기 중 PM 농도와 총 68번의 강우 특성 자료를 이용하였으며, 총 68번의 강우 이벤트 중 13회 강우를 대상으로 부산 부경대학교 캠퍼스에 집수장치를 설치하여 총 216개의 빗물 샘플을 수집하였다. 빗물의 pH와 전기전도도(electrical conductivity, EC)는 실시간 측정되었으며, 빗물 내 양이온(Na⁺, Mg²⁺, K⁺, Ca²⁺, and NH₄⁺) 및 음이온(Cl^-, NO₃^-, and SO₄^2-) 농도를 분석하였다. 또한, 자체 제작한 미세먼지 센서를 이용하여 강우 전후로 대기 중 PM₁₀ 농도를 측정하였으며, 측정된 데이터를 바탕으로 주성분 분석(principal component analysis, PCA)과 피어슨 상관분석(Person correlation analysis)을 실시하여 대기 중 PM₁₀ 농도와 빗물 수질 간 상관관계를 규명하였다. 연구결과, 부산지역의 일평균 대기 중 PM 농도 및 강우 특성은 계절적 차이가 존재하였으며, 대기 중 PM₁₀ 농도와 빗물 수질간 상관성 또한 상이하게 나타났다. 봄철의 경우, 일평균 대기 중 PM₁₀ (34.11 ㎍/m³) 및 PM_2.5 (19.23 ㎍/m³)의 평균 농도는 상대적으로 높게 나타났고 일평균 누적 강우량 및 강우 강도는 상대적으로 낮게 나타났다. 또한, 대기 중 PM₁₀ 농도는 빗물 수질과 유의미한 상관관계를 보였으며 대기 중 PM₁₀ 농도는 pH (r = -0.84)는 감소시키고 EC (r = 0.95) 및 수용성 음이온(r = 0.99) 농도는 증가시키는 요인으로 작용하였다. 여름철의 경우에는 일 평균 PM₁₀ (27.79 ㎍/m³) 및 PM_2.5 (17.41 ㎍/m³)의 평균 농도가 상대적으로 낮은 농도 분포를 보였으며, 최대 일 평균 강우 강도는 81.6 mm/h로 오랜 시간 많은 양의 비를 기록하였다. 상대적으로 낮은 대기 중 PM 농도와 높은 강우 강도로 인해 대기 중 PM₁₀ 농도가 빗물 수질에 미치는 영향을 확인할 수 없었다.

• 한국전자파학회논문지
• /
• 제15권7호
• /
• pp.677-684
• /
• 2004

본 논문에서는 X밴드용 고출력 시스템에 적합한 경사진 원형 도파관 구조를 이용한 소형 T $M_{01}$-T $E_{11}$ 모드 변환기를 제안한다. 제안된 모드 변환기는 마이크로파 에너지가 RBWO 전원으로부터 혼 안테나로 효율적으로 전송되도록 파라미터 연구를 통해 최적화된 구조로 설계되었다. 그리고 반사손실, 각 모드의 전력, 임피던스 대역폭, 그리고 모드 패턴의 시뮬레이션 결과와 측정결과를 제시하였다.다.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3323-3326
• /
• 2011

Various aldoximes and ketoximes were efficiently reduced to their corresponding amines with $NaBH_3CN$ in the presence of $MoCl_5/NaHSO_4{\cdot}H_2O$ system. Reduction reactions were carried out in refluxing EtOH or DMF within 0.3-3.8 h to afford the amines in high to excellent yields.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.205-210
• /
• 2004

Sub-cooled hybrid condenser(SCHC) which have been developed through this study is an appliance of integrating a condenser with a receiver dryer, which were previously separated. It is supposed that the development of sub-cooled hybrid condenser will be able to reduce not only weight, size, production process and cost, but also quite improve in capability, which will be of great use for the technological development and research of an air conditioning system whose importance is higher in a car. Through the present study it was found that the developed SCHC increases in the degree of sub-cooling by 10∼100% compared to conventional condenser. The excessive sub-cool has improved the cooling performance by 10%, and that leads to the reduction in evaporator outlet air temperature $1.5^{\circ}C$. Additionally, it is expected that sub-cooled hybrid condenser weights less by 100g than the previous condensers which has equal super heat.

• 동력기계공학회지
• /
• 제20권4호
• /
• pp.69-74
• /
• 2016

Recently, in order to meet the stricter emission regulations, the proportion of after-treatments for vehicle and vessel is increasing gradually. The purpose of this study is to investigate the de-$CH_4$ characteristics of NGOC in front of proposed combined system according to additive catalyst and support ratio. In the case of Pd addition, the de-$CH_4$ performance of 2Pt-2Pd-3MgO/$Al_2O_3$ NGOC was improved by approximately 10 to 20% for the HC components. The de-$CH_4$ performance of 2Pt-2Pd-3Cr-3MgO/$Al_2O_3$ NGOC was higher compared to five kinds of NGOC catalysts, because Cr particle was smaller and dispersion of Pd was increased. The NGOC(Zeolite:$Al_2O_3$(80%:20%)｝catalyst according to support ratio, was improved performance at low temperature region on CO and NO conversion rate.

• 한국재료학회지
• /
• 제17권8호
• /
• pp.420-424
• /
• 2007

Precipitation behavior has been studied in NiTi-based ordered alloy using transmission electron microscopy. The hardness after solution treatment is high in NiTi alloy suggesting the large contribution of solid solution strengthening in this alloy system. However, the amount of age hardening is not large as compared to the large microstructural variations during aging. At the beginning of aging, the $L2_1-type$ $Ni_2AlTi$ precipitates keep a lattice coherency with the NiTi matrix. By longer periods of aging $Ni_2AlTi$ precipitates lose their coherency and change their morphology to the globular ones surrounded by misfit dislocations. Misfit dislocations, which are observed on {100} planes of H-precipitates have the Burgers vector of a <100> with a pure edge type. The lattice misfits of $NiTi-Ni_2AlTi$ system is estimated from the spacings of misfit dislocations to be 1.3% at 1273 K. The lattice misfits decrease with increasing aging temperature in this system.