• Animal Bioscience
• /
• 제35권12호
• /
• pp.1977-1985
• /
• 2022

Objective: This study was conducted to determine the seasonal characteristics of odorous material emissions from a swine finishing barn equipped with a continuous pit recirculation system (CPRS) using aerobically treated manure. Methods: The CPRS consists of an aerobic manure treatment process and a pit recirculation system, where the solid fraction is separated and composted. The aerated liquid fraction (290.0%±21.0% per day of total stored pig slurry) is continuously recirculated to the top of the slurry in the pit. Four confinement pig barns in three piggery farms were used: two were equipped with CPRS, and the other two operated a slurry pit under the slatted floor across all seasons. Results: The indoor, exhaust, and outside odor intensities were significantly lower in the CPRS group than in the control group (p<0.001). In the CPRS group, the odor intensity outside was significantly lower in the fall than in the other seasons (p = 0.015). In the indoor atmosphere, the temperature and CO₂, NH₃, and H₂S contents of the CPRS group were significantly lower than those of the control group (p<0.05). In the CPRS group, indoor temperature did not significantly change in the spring, summer, and fall seasons and was significantly lower in the winter (p = 0.002). NH₃, H₂S, methyl mercaptan, dimethyl disulfide, trimethylamine, phenol, indole, and skatole levels were significantly lower in the CPRS group than in the control group (p<0.05). There were significant seasonal differences on the odorous material in both the control and CPRS groups (p<0.05), but the pattern was not clear across seasons. Conclusion: The CPRS can reduce the indoor temperature in the summer to a level similar to that in the spring and fall seasons. The CPRS with aerated liquid manure is expected to reduce and maintain malodorous emissions within acceptable limits in swine facilities.

• 대한수학회논문집
• /
• 제38권3호
• /
• pp.913-924
• /
• 2023

We consider the number of colors for colorings of links by the symmetric group S₃ of degree 3. For knots, such a coloring corresponds to a Fox 3-coloring, and thus the number of colors must be 1 or 3. However, for links, there are colorings by S₃ with 4 or 5 colors. In this paper, we show that if a 2-bridge link admits a coloring by S₃ with 5 colors, then the link also admits such a coloring with only 4 colors.

• Current Photovoltaic Research
• /
• 제11권2호
• /
• pp.39-43
• /
• 2023

Carrier-selective contacts (CSCs) solar cells are considerably attractive on highly efficient crystalline silicon heterojunction (SHJ) solar cells due to their advantages of high thermal tolerance and the simple fabrication process. CSCs solar cells require a hole selective contact (HSC) layer that selectively collects only holes. In order to selectively collect holes, it must have a work function characteristic of 5.0 eV or more when contacted with n-type Si. The VO_x, NiO_x, and CuI_x thin films were fabricated and analyzed respectively to confirm their potential usage as a hole-selective contact (HSC) layer. All thin films showed characteristics of band-gap engergy > 3.0 eV, work function > 5.0 eV and minority carrier lifetime > 1.5 ms.

• 대한수학회보
• /
• 제59권5호
• /
• pp.1255-1268
• /
• 2022

We consider the Schrödinger type operator 𝓛 = (-𝚫_ℍⁿ)² + V² on the Heisenberg group ℍⁿ, where 𝚫_ℍⁿ is the sub-Laplacian and the non-negative potential V belongs to the reverse Hölder class RH_s for s ≥ Q/2 and Q ≥ 6. We shall establish the (L^p, L^q) estimates for the Riesz transforms T_𝛼,𝛽,j = V^2𝛼𝛁^j_ℍⁿ𝓛^-𝛽, j = 0, 1, 2, 3, where 𝛁_ℍⁿ is the gradient operator on ℍⁿ, 0 < α ≤ 1-j/4, j/4 < 𝛽 ≤ 1, and 𝛽 - 𝛼 ≥ j/4.

• Bulletin of the Korean Chemical Society
• /
• 제25권11호
• /
• pp.1717-1719
• /
• 2004

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.458-465
• /
• 2021

Borate nonlinear optical crystals have been used as frequency conversion devices in many fields due to their unique transparency and nonlinearity from ultraviolet to visible spectral range. In this study, we theoretically and numerically investigate the properties of broadband second harmonic generation (SHG) in the recently reported Pna2₁-Ba₃Mg₃(BO₃)₃F₃ (BMBF) crystal. The technique is based on the simultaneous achievement of birefringence phase matching and group velocity matching between interacting waves. We discussed all factors required for broadband SHG in the BMBF in terms of two types of phase matching and group velocity matching conditions, the beam propagation direction and the corresponding effective nonlinearity and spatial walk-off, and the spectral responses. The results show that bandwidths calculated in the broadband SHG scheme are 220.90 nm (for Type I) and 165.85 nm (for Type II) in full-width-half-maximum (FWHM). The central wavelength in each case is 2047.76 nm for Type I and 1828.66 nm for Type II at room temperature. The results were compared with the non-broadband scheme at the telecom C-band.

• Membrane and Water Treatment
• /
• 제13권2호
• /
• pp.105-110
• /
• 2022

Al₂O₃ positively charged nanofiltration composite membrane was successfully prepared with aluminate coupling agent (ACA) as modifier, sodium bisulfite (NaHSO₃) and potassium persulfate (K₂S₂O₈) as initiator and methacryloyloxyethyl trimethylammonium chloride (DMC) as crosslinking monomer. The surface of the membrane before grafting and after polymerization were characterized by SEM and FT-IR. Three factor and three-level orthogonal experiments were designed to explore the optimal conditions for membrane preparation, and the optimal group was successfully prepared. The filtration experiments of different salt solutions were carried out, and the retention molecular weight was determined by polyethylene glycol (PEG). The results showed that the polymerization temperature had the greatest effect on the rejection rate, followed by the reaction time, and the concentration of DMC had the least effect on the rejection rate. The rejection rates of CaCl₂, MgSO₄, NaCl and Na₂SO₄ in the optimal group were 83.8%, 81.3%, 28.1% and 23.6% (average value), respectively. The molecule weight cut-off of 90% (MWCO) of the optimal group was about 460, which belongs to nanofiltration membrane.

• 한국주조공학회지
• /
• 제41권3호
• /
• pp.235-240
• /
• 2021

진공 가스분사법으로 제조된 Fe₇₅B₁₃P₅Nb₂Hf₁C₄ 합금의 응고중 액상의 크기와 이에 따른 냉각속도의 변화가 정출상의 형성에 미치는 영향에 대한 고찰을 하였다. 고온 액상에서 동일한 조건으로 응고된 서로 다른 크기의 액상이 구형의 분말형태로 응고될 때 크기에 따른 임계냉각속도의 차이를 계산하였으며, 액상의 평균 반지름이 3배정도 크기 차이가 날 경우 고상으로 변태할 때 임계냉각속도가 13.5배까지 차이가 나는 것을 알 수 있었다. 이러한 임계냉각 속도의 차이에 따른 정출상의 형성과 정출상의 형태와 크기에 따른 탄화물의 형성 거동을 조사하여 열역학 계산으로 예측된 결과와 비교 분석하였으며, 분말입자의 크기가 20~45 마이크론일 경우 Hf과 Nb이 포함된 MC타입의 탄화물이 초정으로 형성 되는 것을 알 수 있었으며 이때 Hf과 Nb의 비율은 합금의 조성 및 냉각속도에 따라 변화됨을 관찰 할 수 있었다.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.114-121
• /
• 2023

선택적 cyclooxygenase (COX)-2 억제제는 기존의 비스테로이드성 소염제의 위장 부작용을 줄일 수 있는 새로운 대체제이다. 하지만, 최근 혈전을 일으켜 심혈관 질환의 위험을 증가시킨다는 보고가 있다. 따라서 본 연구에서는 유효성분인 ursolic acid를 각각 40, 50%로 극대화한 로즈마리 추출물(RE)의 항염증 효과와 이에 따른 심혈관 부작용의 안전성을 확인하였다. RE의 COX 효소 활성 저해 평가 결과 40, 50% RE는 100 ㎍/mL에서 양성 대조군인 celecoxib 및 rofecoxib와 비슷한 COX-2 저해 활성을 보였고, COX-1 저해 활성은 미미하였다. 이후 Lipopoly-saccharide (LPS)를 조건에 따라 처리한 RAW 264.7 세포에 40, 50% RE 1 ㎍/mL를 처리하여 COX-2, COX-1 유전자 발현, 세포 배양액의 prostaglandin E₂ (PGE₂), thromboxane B₂ (TXB₂) 농도를 확인하였다. 실험 결과 COX-2 유전자 발현은 40% RE가 LPS를 24시간 후처리한 조건에서 감소하였고, 40, 50% RE는 COX-1 유전자 발현 및 PGE₂, TXB₂ 농도에는 유의한 영향을 주지 않는 것으로 확인되었다. 따라서 RE는 혈전 생성에 관여하는 prostaglandins의 균형에 영향을 주지 않아 심혈관 혈전 생성의 위험성이 적을 것으로 사료된다.

• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.114-125
• /
• 2023

PURPOSE. The aim of the study was to evaluate the optical properties of new generation (3Y-TZP) monolithic zirconia (MZ) with different abutment types and resin cement shades. MATERIALS AND METHODS. A1/LT MZ specimens were prepared (10 × 12 × 1 mm, N = 30) and divided into 3 groups according to cement shades as transparent (Tr), yellow (Y) and opaque (O). Abutment specimens were obtained from 4 different materials including zirconia (Group Z), hybrid (Group H), titanium (Group T) and anodized yellow titanium (Group AT). MZ and abutment specimens were then cemented. L^*, a^*, and b^* parameters were obtained from MZ, MZ + abutment, and MZ + abutment + cement. ∆E₀₀₁^* (between MZ and MZ + abutment), ∆E₀₀₂^* (between MZ and MZ + abutment + cement) and ∆E₀₀₃^* (between MZ + abutment and MZ + abutment + cement) values were calculated. Statistical analyses included 2-way ANOVA, Bonferroni, and Paired Sample t-Tests (P < .05). RESULTS. Abutment types and resin cements had significant effect on L^*, a^*, b^*, ∆E₀₀₁^*, ∆E₀₀₂^*, and ∆E₀₀₃^* values (P < .001). Without cementation, whereas zirconia abutment resulted in the least discoloration (∆E₀₀₁^* = 0.68), titanium abutment caused the most discoloration (∆E₀₀₁^* = 4.99). The least ∆E₀₀₂^* = 0.68 value was seen using zirconia abutment after cementation with yellow shaded cement. Opaque shaded cement caused the most color change (∆E₀₀₃^* = 5.24). Cement application increased the L^* values in all groups. CONCLUSION. The least color change with/without cement was observed in crown configurations created with zirconia abutments. Zirconia and hybrid abutments produced significantly lower ∆E₀₀₂^* and ∆E₀₀₃^* values in combination with yellow shaded cement. The usage of opaque shaded cement in titanium/anodized titanium groups may enable the clinically unacceptable ∆E₀₀^* value to reach the acceptable level.