• 한국조리학회지
• /
• 제24권3호
• /
• pp.71-82
• /
• 2018

The purpose of this study was to investigate relationship between eating out consumption propensity, dessert $caf{\acute{e}}$ satisfaction, psychological well-being, and quality of life. The objective of this study was reached by verifying a hypothesis through empirical analysis. Data collection was conducted from November 10, 2017 to December 10, 2015, and 250 copies of the questionnaires were distributed. Of these, 243 valid copies of the data were used for the analysis except for the questionnaires that did not meet the research purpose. The results of the analysis were as follows. First, only health pursuit type and quick & convenience pursuit type had a significant influence on satisfaction of dessert cafe. On the other hand, economic value pursuit type, eating out enjoyment pursuit type, and atmosphere pursuit type did not significantly affect dessert cafe satisfaction. Second, among the eating out consumption propensity, there were significant influences on psychological well-being in order of atmosphere pursuit type, eating out enjoyment pursuit type, economic value pursuit type. On the other hand, the health pursuit type and the quick & convenience pursuit type did not significantly affect psychological well-being. Third, satisfaction of dessert cafe had a significant effect on psychological well-being. Fourth, psychological well-being has a significant effect on the quality of life compared to dessert cafe satisfaction. The result of this study is supposed to be utilized as an instrumental data for establishing a strategy for differentiating dessert cafe to improve the quality of life through grasping the eating out consumption propensity to increase satisfaction and psychological well-being in dessert cafe.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.443-446
• /
• 2003

This study was conducted to draw design rainfall for the regional design rainfall derived by the optimal distribution and method of frequency analysis. The design rainfalls were calculated by the regional and at-site analysis for Log-Pearson type III and GEV distributions and were compared with Relative efficiency(RE) which is ratio of Relative root-mean-square error(RRMSE) by the regional and at-site analysis for Log-Pearson type III and GEV distributions. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis for GEV distribution and design rainfall maps were drawn by GIS techniques.

• 한국압력기기공학회 논문집
• /
• 제13권1호
• /
• pp.84-91
• /
• 2017

This paper is proposed to select the optimal finite element type in finite element analysis. Based on the NUREG reports, static analyses were performed using a commercial analysis program, $ABAQUS^{TM}$. In this study, we used a nonlinear kinematic hardening model proposed by Chaboche. The analysis result of solid elements by inputting the same material constants was different from the results of the NUREG report. This is resulted from the difference between shell element and solid element. Therefore, the material constants that have similar result to the experimental result were determined and compared according to element type. In case of using solid element for efficient finite element analysis, we confirmed that the use of C3D8I element type(incompatible mode 8-node linear brick element) leads the accurate result while reducing the analysis time.

• 말소리와 음성과학
• /
• 제6권3호
• /
• pp.63-72
• /
• 2014

The current study assessed the utility of acoustic analyses the most commonly used in routine clinical voice assessment including perturbation, nonlinear dynamic analysis, and Spectral/Cepstrum analysis based on signal typing of dysphonic voices and investigated their applicability of clinical acoustic analysis methods. A total of 70 dysphonic voice samples were classified with signal typing using narrowband spectrogram. Traditional parameters of %jitter, %shimmer, and signal-to-noise ratio were calculated for the signals using TF32 and correlation dimension(D2) of nonlinear dynamic parameter and spectral/cepstral measures including mean CPP, CPP_sd, CPPf0, CPPf0_sd, L/H ratio, and L/H ratio_sd were also calculated with ADSV(Analysis of Dysphonia in Speech and VoiceTM). Auditory perceptual analysis was performed by two blinded speech-language pathologists with GRBAS. The results showed that nearly periodic Type 1 signals were all functional dysphonia and Type 4 signals were comprised of neurogenic and organic voice disorders. Only Type 1 voice signals were reliable for perturbation analysis in this study. Significant signal typing-related differences were found in all acoustic and auditory-perceptual measures. SNR, CPP, L/H ratio values for Type 4 were significantly lower than those of other voice signals and significant higher %jitter, %shimmer were observed in Type 4 voice signals(p<.001). Additionally, with increase of signal type, D2 values significantly increased and more complex and nonlinear patterns were represented. Nevertheless, voice signals with highly noise component associated with breathiness were not able to obtain D2. In particular, CPP, was highly sensitive with voice quality 'G', 'R', 'B' than any other acoustic measures. Thus, Spectral and cepstral analyses may be applied for more severe dysphonic voices such as Type 4 signals and CPP can be more accurate and predictive acoustic marker in measuring voice quality and severity in dysphonia.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.122-128
• /
• 2015

Recently, as the demand for high efficiency, multi-function machine tools has increased, domestic machine tool industries are investing in research and development for Gantry-Type Machining centers. In this thesis, for the purpose of evaluating machining accuracy and designing a machine tool structure, a simplified model of the main frame is suggested. The results show the general characteristics of the optimum design, and the approach is shown as practicable for the preliminary design analysis and improvement of a conceptual design of a Gantry-Type Machining center. This paper's results are expected to improve the static characteristics of Gantry-Type Machine centers. The three-dimensional finite element models proved that the modeling method might be applied to real machine tool structures.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.388-393
• /
• 2020

Purpose: This study aims to understand the relationship between university major satisfaction and job preference according to DISC behavior patterns. Methods: To conduct our evaluation, we surveyed a group of 118 students from the Department of Dental Laboratory Technology at the college of Jinju city from August 31 to September 11, 2020. The collected data was evaluated through frequency analysis, descriptive statistics analysis, one-way ANOVA, and regression analysis. Results: The analysis revealed that the steadiness type had the highest and the dominance type had the lowest major satisfaction level by DISC behavior type. The job preference was different for each DISC behavior type, and higher the preference for stability and development, the higher the degree of satisfaction with the major. Conclusion: These results suggest that DISC behavior type, major satisfaction, and job preference are all related. Therefore, these factors should be considered when implementing career guidance and educational programs for college students.

• Composites Research
• /
• 제23권6호
• /
• pp.7-13
• /
• 2010

CNG 차량에서 실사용 중 Type3 복합재료 압력용기의 외부 복합재 층에 결함이 발생된다면, 용기의 구조적 성능 즉, 원래의 설계수명보다 반복수명이 감소되는 현상을 초래할 수 있다. 이에 따라, 본 연구에서는 복합재 결함을 고려한 복합재료 압력용기의 유한요소 모델링과 해석 기법을 제시하였다. Type3 복합재료 압력용기의 유한요소해석은 자긴처리 공정에서 알루미늄 라이너의 소성 변형으로 인해 경로 의존적 현상을 보이므로, 실사용 중 결함이 발생되는 실제 환경을 고려한 해석에서 결함은 자긴압력 이후에 도입되어야한다. 이러한 상황의 사실적인 시뮬레이션을 위해, 해석의 중간단계에서 결함이 도입되는 유한요소 모델링과 해석 기법이 제시되었으며, 해석결과는 해석의 시작단계에서부터 모델에 초기결함을 내포하는 일반적 유한요소해석과 비교되었다. 제안된 해석 기업은 Type3 복합재료 압력용기의 복합재층 손상에 따른 영향성 평가 및 실사용 중에서의 검사 기준을 마련하는데 효과적으로 사용될 수 있다.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.305-320
• /
• 2014

This study identifies the foot shapes of elderly women by classifying foot type according to the 3D shape of the foot and 2D sole type analyzing individual characteristics. The subjects were 295 elderly women over 60 years of age who live in Gwangju. A foot scanner (K&I Technology $Nexcan^{(R)}$) was used to obtain three-dimensional shapes of feet and a flat bad scanner (HP Scanjet G2410) was used to obtain the two-dimensional shapes of soles. The anthropometric measuring items consisted of 59 items estimated on the right foot of each subject. Data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the SPSS 19.0 statistical program. To classify the side type of elderly women's feet, three-dimensional measurement data were analyzed for the 27 measurement items using factor analysis and 6 factors were extracted (inside height and side gradient, ankle thickness, toe height and midfoot size, lateral malleolus height, instep, and heel height and gradient). A cluster analysis resulted in three types: 36.5% belonged to Type 1 (high forefoot and high midfoot), 31.1% belonged to Type 2 (high forefoot and low midfoot), and 32.4% belonged to Type 3 (low forefoot and high midfoot). The distribution was relatively even. For the sole, 8 factors were extracted (ball width and medial foot protrusion, lateral foot protrusion, forefoot and hindfoot length ratio, ball gradient, heel size, toe breadth, lateral ball length, and foot length) and a cluster analysis resulted in three Types (Type H, Type D, and Type A). The largest proportion (42.7%) belonged to Type H, which is the same as the elderly men's case.

• 한국의상디자인학회지
• /
• 제25권4호
• /
• pp.147-161
• /
• 2023

This study used 3D anthropometric data from the 8th Size Korea to type and analyze whole body shapes of obese women in their 20s and 30s, and constructed dimensional data for human body items needed to create a 3D human body model for each type. The data analysis used data from 148 obese women in their 20s and 30s, and a total of 48 index values, drop values, and angle items were subjected to factor analysis and one-way variance analysis to categorize body types and verify significant differences by type. As a result of the factor analysis, 12 factors were extracted and divided into 4 body types. Type 1 is a 'standard type with a curved torso with balanced upper and lower body lengths', Type 2 is a 'bending forward type with a short, thick lower body, and an uncurved torso', Type 3 is a 'lean back type with a long and thin lower body and an H-shape torso', Type 4 is a 'sway back type with a long and thick lower body and abdominal obesity'. The representative body type of obese women in their 20s and 30s was identified as Type 1. The constructed body shape information will be used as basic data for future 3D human body modeling.

• 산경연구논집
• /
• 제9권12호
• /
• pp.15-21
• /
• 2018

Purpose - In order to improve the comprehensive competitiveness of cultural tourism creative industries in the region, different grade cities should adapt to local conditions and differentiated development as the angle. It can promote the optimization of regional tourism industry structure, and make relevant suggestions accordingly. Research design, data, and methodology - Based on the characteristics of cultural tourism creative industry, 24 indicators are selected from four aspects. The comprehensive competitiveness evaluation index system of cultural tourism creative industry is constructed. The essay use factor analysis to quantitatively evaluate 27 cities in the Pan-Yangtze River Delta, and use cluster analysis to classify the competitiveness of cultural tourism creative industries in each city into five types. Results - The results of cluster analysis show that the whole area presents five kinds of step-like features, which are mature leading type, the advantageous development type, comparatively advantageous type, well-grounded type and difference-promotion type. Conclusions - The factor analysis method was used to quantitatively evaluate 27 cities in the Pan-Yangtze River Delta, and cluster analysis was used to classify the cultural tourism creative industry competitiveness of each city into fives type city. Based on the differentiation of cultural tourism creative industry competitiveness and 27 cities in the Pan-Yangtze River Delta, the relevant strategies were proposed.