• The Journal of the Korean dental association
• /
• v.32 no.9 s.304
• /
• pp.620-628
• /
• 1994

Stud attachment는 overdenture와 overlay partial denture에 이용되며 임상술식 및 기공과정이 간편하며 가격이 저렴하여 많이 이용되고 있다. 여기에서는 Stud attachment(대한치과의사협회지 1993년 7-8월호)에 이어서 최근에 개발됐거나 우리가 임상에 응용하기에 적합하다고 생각되는 Micro-Fix, Dalbo-B, Dalbo-Rotex attachment에 관하여 설명하고자 한다.

• The Journal of the Korean dental association
• /
• v.32 no.8 s.303
• /
• pp.550-556
• /
• 1994

Stud attachment는 overdenture와 overlay partial denture에 이용되며 임상술식 및 기공과정이 간편하며 가격이 저렴하여 많이 이용되고 있다. 여기에서는 Stud attachment(대한치과의사협회지 1993년 7월호)에 이어서 최근에 개발됐거나 우리가 임상에 응용하기에 적합하다고 생각되는 Micro-Fix, Dalbo-B, Dalbo-Rotex attachment에 관하여 설명하고자 한다.

• 대한치과보철학회:학술대회논문집
• /
• 2000.04a
• /
• pp.42-42
• /
• 2000

• 대한치과보철학회:학술대회논문집
• /
• 2004.04a
• /
• pp.30-30
• /
• 2004

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.91-104
• /
• 2008

Recently, osseointegrated implants have been used to improve denture support, stability, and retention. Several studies have been revealed that mandibular two-implant overdentures significantly increase patient satisfaction with the function of their prostheses. Use of a wide variety of attachment systems, including stud, magnet, and bar attachments, has proven both clinically predictable and effective. This article presents that two-implant overdenture can become the standard of care for treatment of the edentulous mandible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.311-318
• /
• 2017

Several types of attachments have been used for implant supported and/or retained overdentures. Locator is one of the stud type attachments and it has been generally used. However, the colored matrix is resilient and vulnerable to wear, so frequent post-insertion maintenance is needed. To solve this problem, it is necessary to introduce innovative attachment system. Overdentures using Air Gap attachment (AGA) has improved masticatory function and facial esthetics. AGA is made of metal, so it could be more resistant to wear or friction than the other resilient attachments. Nevertheless, AGA plays a role in stress breakers because it allows movement during denture movement with predetermined gap. In addition, both pre-existing implants and natural teeth were successfully used for connection of AGA. AGA could replace other unsplinted type of attachments. Overdentures using AGA could provide satisfactory result in terms of function, esthetics and retention. However, long term follow up is needed.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.303-311
• /
• 2015

PURPOSE. The aim of this study was to compare the changes in retentive force of stud attachments for implant overdentures by in vitro 2-year-wear simulation. MATERIALS AND METHODS. Three commercially available attachment systems were investigated: Kerator blue, O-ring red, and EZ lock. Two implant fixtures were embedded in parallel in each custom base mounting. Five pairs of each attachment system were tested. A universal testing machine was used to measure the retentive force during 2500 insertion and removal cycles. Surface changes on the components were evaluated by scanning electron microscopy (SEM). A Kruskal-Wallis test, followed by Pairwise comparison, was used to compare the retentive force between the groups, and to determine groups that were significantly different (${\alpha}$<.05). RESULTS. A comparison of the initial retentive force revealed the highest value for Kerator, followed by the O-ring and EZ lock attachments. However, no significant difference was detected between Kerator and O-ring (P>.05). After 2500 insertion and removal cycles, the highest retention loss was recorded for O-ring, and no significant difference between Kerator and EZ lock (P>.05). Also, Kerator showed the highest retentive force, followed by EZ lock and O-ring, after 2500 cycles (P<.05). Based on SEM analysis, the polymeric components in O-ring and Kerator were observed to exhibit surface wear and deformation. CONCLUSION. After 2500 insertion and removal cycles, all attachments exhibited significant loss in retention. Mechanism of retention loss can only be partially explained by surface changes.

• 대한치과보철학회:학술대회논문집
• /
• 1999.04a
• /
• pp.81.2-82
• /
• 1999

• Journal of Technologic Dentistry
• /
• v.45 no.3
• /
• pp.61-66
• /
• 2023

Purpose: The current study examined the retention and wear resistance of stud-type attachments made of high-performance polyetheretherketone (PEEK) or polyetherketoneketone (PEKK) from the polyaryletherketones (PAEKs) family. Methods: The study sample included 10 PEEK or PEKK attachments that were mounted onto their male parts, designed on the upper aspect of the attachment, with a load of 30 N. Tensile stress was applied using an Instron machine to separate the male and female parts, and the maximum tensile stress to be applied was determined based on the retention force observed. The wear resistances of PEEK and PEKK were evaluated by measuring the inner diameter of the inserted female part 10 times. Results: The maximum tensile stresses of PEEK and PEKK were 56.26±0.58 and 69.12±0.92 N, respectively, with the maximum stress required to remove the PEKK specimens from the abutment being 12.86 N higher than that required to remove the PEEK specimens. Furthermore, PEKK exhibited higher wear resistance than PEEK. Conclusion: This study evaluated custom-made removable implant-retained attachment components for overdentures, wherein the female parts were made of PEEK or PEKK. The retention stress and wear resistance were evaluated based on the type of attachment material, and the results showed that both types of attachment inserts demonstrated clinically acceptable results in terms of retention.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.93-100
• /
• 2016

The purpose of this study was to compare the changes of retentive force in different stud attachment systems for implant retained overdenture. Two commercially available attachments with different retentive forces were investigated: Kerator (pink, blue, red) and O-ring (orange, red). Two implant fixtures were vertically embedded in base mountings. Five pairs of each attachment were evaluated. A universal testing machine was used to evaluate the retentive force of two attachments during wear simulation. Surface characteristics of each attachment system were evaluated with scanning electron microscopy. Five pairs of each attachment were evaluated. Kerator pink showed the highest initial retention. After 2,500 cycles of wear-simulation, Kerator pink noted the largest decrease in retention. According to results of surface analysis, Worn surfaces were obtained in matrices and patrices. Heavy wears were observed in matrices. After 2 year-wear simulation, most attachments exhibited retention loss. Attachments using different kind of material exhibited dissimilar surface alterations.