• 제목/요약/키워드: Strut Support

검색결과 52건 처리시간 0.025초

Behavior of underground strutted retaining structure under seismic condition

  • Chowdhury, Subha Sankar;Deb, Kousik;Sengupta, Aniruddha
    • Earthquakes and Structures
    • /
    • 제8권5호
    • /
    • pp.1147-1170
    • /
    • 2015
  • In this paper, the behavior of underground strutted retaining structure under seismic condition in non-liquefiable dry cohesionless soil is analyzed numerically. The numerical model is validated against the published results obtained from a study on embedded cantilever retaining wall under seismic condition. The validated model is used to investigate the difference between the static and seismic response of the structure in terms of four design parameters, e.g., support member or strut force, wall moment, lateral wall deflection and ground surface displacement. It is found that among the different design parameters, the one which is mostly affected by the earthquake force is wall deflection and the least affected is the strut force. To get the best possible results under seismic condition, the embedment depth of the wall and thickness of the wall can be chosen as around 100% and 6% of the depth of final excavation level, respectively. The stiffness of the strut may also be chosen as $5{\times}105kN/m/m$ to achieve best possible performance under seismic condition.

추력기 모듈을 포함한 우주발사체 고공환경모사 (High-Altitude Environment Simulation of Space Launch Vehicle Including a Thruster Module)

  • 이성민;오범석;김영준;박기수
    • 한국항공우주학회지
    • /
    • 제46권10호
    • /
    • pp.791-797
    • /
    • 2018
  • 본 연구에서는, 충격파 터널을 이용하여 한국형발사체의 발사 후 마하수 6을 돌파하는 고도 65 km에서의 고공환경모사 연구를 수행하였다. 시험모델을 고정하는 지지대로 인한 유동교란 최소화를 위해 여러 다른 지지대 형상을 고려하였으며, 교란이 최소화된 지지대를 적용한 추력기 시험모델을 사용하여 단발-플룸의 추진기관을 포함한 고공환경모사 실험을 수행하였다. 가시화기법을 통한 추력기 시험을 통해 충격파 패턴뿐만 아니라 배기 플룸과 자유류 유동 간의 상호작용으로 발생하는 전반적인 유동 패턴을 실험적으로 확인하였다. 전산해석결과와 실험결과와의 비교를 통해 선단에서의 충격파 위치는 동일, 후단과 노즐부에서는 불필요 충격파로 인한 ${\pm}7%$의 오차 발생이 확인되었다.

Nonlinear finite element analysis of four-pile caps supporting columns subjected to generic loading

  • de Souza, Rafael Alves;Kuchma, Daniel Alexander;Park, Jung-Woong;Bittencourt, Tulio Nogueira
    • Computers and Concrete
    • /
    • 제4권5호
    • /
    • pp.363-376
    • /
    • 2007
  • The paper presents the development of an adaptable strut-and-tie model that can be applied to the design or analysis of four-pile caps that support axial compression and biaxial flexure from a supported rectangular column. Due to an absence of relevant test data, the model is validated using nonlinear finite element analyses (NLFEA). The results indicate that the use of the proposed model would lead to safe and economical designs. The proposed model can be easily extended to any number of piles, providing a rational procedure for the design of wide range of pile caps.

강관버팀보 흙막이 시스템의 거동 특성에 관한 수치해석적 연구 (Numerical Investigation on the Behavior of Braced Excavation Supported by Steel Pipe Struts)

  • 유충식;나승민;이종구;장동욱
    • 한국지반공학회논문집
    • /
    • 제26권6호
    • /
    • pp.45-56
    • /
    • 2010
  • 본 논문에서는 강관버팀보로 지지되는 흙막이 굴착 시스템의 거동에 관한 수치해석 연구내용을 다루었다. 최근 들어 적용성이 점차 늘고 있는 강관버팀보로 지지되는 흙막이 시스템의 거동특성에 관한 이해 증진의 일환으로 본 연구에서는 강관버팀보가 적용된 실제 현장 단면에 대한 3차원 해석을 수행하였으며 그 결과를 토대로 흙막이 벽체 및 버팀보, 브레이싱 시스템에 대한 3차원 거동 메카니즘을 고찰하였다. 이와 아울러 동일한 굴착단면에 대해 H-형강 버팀보 적용 조건에 추가해석을 통해 강관버팀보 적용 단면과의 직접적인 비교를 시도하였다. 그 결과 강관버팀보 적용단면의 경우 H-형강 단면과 비교하여 수평간격이 넓음에도 불구하고 거의 대등한 거동을 보이는 것으로 나타났다.

단순지지 RC 깊은 보 부정정 스트럿-타이 모델의 하중분배율- (I) 하중분배율의 제안 (Load Distribution Ratios of Indeterminate Strut-Tie Models for Simply Supported RC Deep Beams - (I) Proposal of Load Distribution Ratios)

  • 김병헌;윤영묵
    • 대한토목학회논문집
    • /
    • 제28권2A호
    • /
    • pp.259-267
    • /
    • 2008
  • 철근콘크리트 깊은 보는 콘크리트와 전단철근에 의한 전단저항 메커니즘의 성능에 의해 극한강도가 지배된다. 깊은 보의 거동은 전단지간대 유효깊이의 비, 휨철근비, 하중점과 지지점의 조건, 그리고 사용재료의 성질 등의 여러 변수간의 복합적인 역학관계로 인해 매우 복잡하다. 본 논문에서는 이러한 깊은 보의 강도 및 거동 특성을 모두 반영하여 단순지지 철근콘크리트 깊은 보의 설계를 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현 스트럿-타이 모델 설계기준을 부정정 스트럿-타이 모델을 이용한 단순지지 철근콘크리트 깊은 보의 설계에 합리적으로 적용하기 위해 수직 트러스 메커니즘에 의해 전달되는 하중의 크기 즉 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 하중분배율의 결정 시 단순지지 철근콘크리트 깊은 보의 전단에 대한 연성파괴거동을 확보하기 위하여 깊은 보의 전단저항 메커니즘을 구성하는 콘크리트 스트럿과 수직철근 타이가 동시에 파괴된다는 전단평형철근비 개념을 도입하였으며, 다양한 수치해석결과를 바탕으로 단순지지 깊은 보의 강도 및 거동에 영향을 미치는 전단지간대 유효깊이의 비, 휨철근비, 그리고 콘크리트의 압축강도 등의 설계변수를 고려하였다. 본 논문의 후속편에서는 기존의 여러 설계방법들과 본 연구에서 제안한 방법을 이용하여 파괴실험이 수행된 다양한 종류의 단순지지 깊은 보의 강도를 평가하고, 본 연구에서 제안한 방법의 적합성을 검증하였다.

Minimally Invasive Percutaneous Plate Osteosynthesis via a Deltoid-splitting Approach with Strut Allograft for the Treatment of Displaced 3- or 4-part Proximal Humeral Fractures

  • Noh, Young-Min;Kim, Dong Ryul;Kim, Chul-Hong;Lee, Seung Yup
    • Clinics in Shoulder and Elbow
    • /
    • 제21권4호
    • /
    • pp.220-226
    • /
    • 2018
  • Background: This study introduces a surgical technique with good clinical outcome useful in the treatment of osteoporotic displaced 3- or 4-part proximal humeral fractures. Methods: From May 2014 to February 2016, 16 patients with displaced 3- or 4-part proximal humeral fractures were treated by application of a locking plate with an endosteal strut allograft via a deltoid splitting approach with a minimum follow-up of 12 months. The allograft was inserted through a fractured gap of the greater tuberosity to support the humeral head and then fixed by a locking plate with meticulous soft tissue dissection to protect the axillary nerve. Surgical outcomes were evaluated by the American Shoulder and Elbow Surgeons (ASES) and visual analogue scale (VAS) scores, radiological imaging, and clinical examination. Fixation failure on radiographs was defined as a >$5^{\circ}$ loss of neck shaft angle (NSA) compared to that on an immediate postoperative radiograph. Avascular necrosis (AVN) of the humeral head was also evaluated. Results: In all cases, complete union was achieved. The ASES and VAS scores were improved to $85.4{\pm}2.1$ and $3.2{\pm}1.3$, respectively. Twelve patients (75.0%) had greater than a $5^{\circ}$ change in NSA; the average NSA change was $3.8^{\circ}$. Five patients (31.3%) had unsatisfactory ranges of motion exhibiting a <$100^{\circ}$ active forward flexion. No axillary nerve injuries or AVN were observed at the last follow-up. One patient was converted to reverse total arthroplasty due to severe pain and functional deficit. Conclusions: Minimally invasive fixation via a locking compression plate and an endosteal fibula strut allograft in Neer classification 3-or 4-part fractures with severe osteoporosis in elderly patients can achieve good clinical results.

전진익형 항공기 모델에 대한 KARI LSWT와 TsAGI T-102 풍동시험결과 비교 (Comparison of Wind Tunnel Test Results for Forward-Swept Wing Airplane at KARI LSWT and TsAGI T-102)

  • 조태환;정진덕;장병희;이장연
    • 한국항공우주학회지
    • /
    • 제32권5호
    • /
    • pp.18-23
    • /
    • 2004
  • 한 러 풍동시험 기술협력사업의 일환으로 러시아 TsAGI T-012 풍동에서 KARI가 보유하고 있는 전진익형 항공기 모델에 대한 풍동시험을 수행하였다. Wire-suspension 모델지지부를 사용하고 있는 T-102 시험결과와 KARI 3점지지부 및 2 점지지부 시험결과를 비교하였다. 항력의 경우 KARI 시험결과와 TsAGI T-102 시험결과는 매우 좋은 일치성을 보이고 있다. 조종면에 의한 영향을 비교한 결과 두 기관의 시험결과는 요잉모멘트와 롤링모멘트에서도 매우 좋은 일치성을 보이고있다.

사교의 사각에 따른 하부구조 설계변화 (Change of Substructure Design with Changed Angle of Skew Bridges)

  • 이주호;염종윤;박경래;배한욱
    • 콘크리트학회논문집
    • /
    • 제11권3호
    • /
    • pp.3-12
    • /
    • 1999
  • This study presents a suggestion of regulation of skewed slab bridge. In order to find the characteristic behavior of skew bridge, many cases of skew bridges were analyzed with changed angle of skew. The comparison of design methods for cantilever part in pier was also made. It was found that : (1) The lower the skew angle was, the higher the maximum support reaction forces at the end point were. (2) The higher the ratio of L/B was, the higher the maximum support reaction force at the point was. (3) The effect of skew may be neglected for skew angles of $70^{\circ}$or more. (4) If elastic springs are applied to the boundary conditions to simulate the rubber pad bearings, the results will be more reasonable. (5) The shear deformation effect must be considered in the analysis of cantilever part of substructure. (6) Using strut and tie model to design cantilever part of pier, it will be more simple than finite element method with same accuracy and more accurate than using frame element.

거대 낭종성 골병소 또는 소파 후 잔유 골 결손부에 시행한 내재형 동종 피질 지주골 이식술 (Allogeneic Inlay Cortical Strut Grafts for Large Cysts or Post-curettage Cavitary Bony Defects)

  • 정양국;강용구;김철진;이안희;박정미;박원종;유현호
    • 대한골관절종양학회지
    • /
    • 제17권2호
    • /
    • pp.73-78
    • /
    • 2011
  • 목적: 사지 장골의 거대한 골 낭종이나 소파술 후 남은 골 결손부에 시행한 "내재형 피질 지주골 이식술"의 치료결과를 평가하였다. 대상 및 방법: 사지 장골의 거대한 골 낭종이나 소파술 후 남은 골 결손부에 대하여 내재형 동종 피질 지주골과 동종 망상골 이식술을 시행한 7예를 대상으로 하였다. 6예에서는 추가적인 금속판 내고정술이 시행되었다. 원발병소는 단순 골낭종이 3예, 섬유성 이형성증에서 속발된 동맥류성 골낭종이 2예, 이전에 수술한 골시멘트를 제거한 후 남은 골 결손이 1예, 섬유성 이형성증이 1예였다. 3예에서는 최초 내원시 병적 골절이 동반되어 있었다. 골 융합의 진행, 생역학적 지지기능 및 기능적 결과를 평가하였으며 평균 추시 기간은 25.4개월이었다. 결과: 전예에서 이식된 동종 피질 지주골은 숙주골과 융합되었으며 6예의 골간단부에서는 평균 4.2개월에, 5예의 골간부에서는 평균 5.8개월에 융합되었다. 부가적인 수술 등의 조치없이 7예 중 6예에서 생역학적 지지가 가능하였으며 동종골 이식과 직접 관련된 합병증은 발생하지 않았다. 최종 추시시 기능적 평가상 평균 29.6으로 우수한 결과를 보였다. 결론: 거대한 골 낭종이나 소파술 후 남은 골 결손부에 시행한 내재형 피질 지주골 이식술은 추가적인 생역학적 안정성과 나사못 고정의 골지주판을 제공하여 조기거동과 우수한 기능적 결과를 가능하게 하였다.

실내모형시험을 통한 흙막이벽체 버팀대 변형에 따른 흙막이벽체 및 인접터널의 거동 (Behavior of wall and nearby tunnel due to deformation of strut of braced wall using laboratory model test)

  • 안성주;이상덕
    • 한국터널지하공간학회 논문집
    • /
    • 제20권3호
    • /
    • pp.593-608
    • /
    • 2018
  • 흙막이벽체 시공 중 버팀대에 문제가 발생하여 변형되거나 제 기능을 상실하게 되면 흙막이벽체에 과다한 변형의 원인이 된다. 따라서 본 연구에서는 모형시험을 통해 시공 중 흙막이벽체의 버팀대 일부가 기능을 상실하게 되었을 때 흙막이 벽체의 거동특성 및 배면에 인접한 터널의 거동을 파악하고자 하였다. 연구 결과, 흙막이벽체의 변형으로 인해 배면지반의 토압이 재배치되고 지표변위를 발생시켜 인접한 터널의 변형에 영향을 미쳤으며, 터널에서 가장 가까운 측벽에 위치한 버팀대를 제거하였을 때 흙막이벽체 변형 및 터널변형이 가장 크게 나타났다. 터널의 위치에 따른 평균 전이토압은 터널 심도가 0.65D에서 2.65D로 깊어짐에 따라 평균 25.6% 증가하였으며, 흙막이벽체와 터널과의 이격거리가 0.5D에서 1.0D로 증가함에 따라 전이토압이 평균 16% 증가하였다. 버팀대 제거에 따른 흙막이벽체의 수평변위는 제거되는 버팀대 부근에 집중되는 경향을 보였으며 버팀대 제거위치가 하부로 내려갈수록 수평변위는 비선형적으로 증가하는 것으로 나타났다. 터널 내공변위는 토피고 1.15D, 수평거리 0.5D일 때 최대 내공변위가 발생하였고, 토피고 2.65D, 수평거리 1.0D에서 최소 내공변위가 발생하였다. 가상파괴면이 터널의 중심부를 통과하는 범위인 토피고 1.15~1.65D, 수평거리 0.5D에서 터널의 내공변위가 크게 증가하는 것으로 검토되었으며, 최대 내공변위와 최소 내공변위의 차이는 약 2배 정도 발생하였다.