• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.2
• /
• pp.23-28
• /
• 2000

In this study, pool boiling performance of a structured enhanced tube for a flooded refrigerant evaporator was experimentally investigated. Tests were performed for three different refrigerants(R-11, R-123, R-l34a). Compared with the heat transfer coefficients of the smooth tube, the heat transfer coefficients of the enhanced tube were 6.6 times larger for R-11, 6.0 times larger for R-123 and 3.5 times larger for R-l34a, which are comparable with the performance of foreign products. The heat transfer coefficients of R-l34a was higher than those of R-11 or R-123, both for the enhanced tube and for the smooth tube. At 4.4$^\circ$C saturation temperature, however, the heat transfer coefficients of R-l34a was approximately the same as those of R-11. The effect of the saturation pressure on the boiling performance was similar to that of the smooth tube-the heat transfer coefficient increased as the saturation pressure increased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.5
• /
• pp.195-201
• /
• 2016

Enhanced tubes are widely used in air-conditioning and process industries. Structural tubes having three-dimensional roughness are well known to be able to significantly enhance pool boiling heat transfer of refrigerants. In this study, five structural enhanced tubes having different fin density, fin height, and fin gap width were tested using R-134a. Results showed that the heat transfer coefficient was increased with increased fin density. Within test range, the effect of fin height on pool boiling heat transfer coefficient was insignificant. The heat transfer coefficients of the optimum configuration (2047 fpm, 0.21 mm gap width) tube were lower than those of other commercial enhanced tubes. This might be due to the larger fin gap width of the present enhanced tube.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.268-271
• /
• 2007

A sandwich tube is a structured material that has two inner and outer circular tubes and light material between them. In this paper, a sandwich tube with a pyramidal truss core is introduced. Fabrication method and example made by brazing are shown. The behavior of the sandwich tube under lateral loading is predicted by analytical and numerical method. Comparative study between the sandwich and the monocoque tube is performed at a point of view such as strength and weight saving. As a result, proposed tube is appropriate for application to lightweight structural material

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.107-114
• /
• 2023

X-ray fluorescence analysis has been widely used in the field of science and industry because it gives information about elements and their concentrations without destruction of samples. To increase analysis accuracy of fluorescence generated by photons of the transmission-type X-ray tube for mixture and compound samples would be recommend to have strong energy near 10 keV and 20 keV simultaneously. Tungsten of 9.65 keV and molybdenum of 17.48 keV were considered as targets with dual deposition structure for obtaining two strong characteristic X-rays, and the transmission-type X-ray tube was analyzed using Geant4 Monte Carlo simulation. The W-Mo structure resulted in strong characteristic X-ray near 10 keV and 20 keV simultaneously. A structure with Mo-W multilayers of 5 ㎛ thick also gave optimal spectrum. Various material combination and thickness optimization for the dual-structured target can give X-ray spectrum with strong characteristic X-ray of specific energies.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.1
• /
• pp.19-24
• /
• 2003

The objectives of this paper are to develop a new method of wettability mea-surement and to study the effect of surface roughness on the wettability in a $H_2O$/LiBr falling film absorber. Two absorber tubes with micro-scale roughness and a bare tube are tested in a falling film absorber installed in a test rig. Inlet solution temperature, concentration and mass flow rate are considered as key parameters. A new method is proposed to estimate the wettability of a tube by measuring a minimum mass flow rate to wet the tube completely. The wettability for the structured surfaces was higher than that for the bare tube. The wettability decreased linearly along the vertical location. The wettability increased with increasing the solution temperature and the solution mass flow rate. The experimental correlations of the wettability for the bare and the micro-hatched tubes were developed with error bands of$\pm20%\;and\;\pm10%$, respectively. This work can be used in the design of absorbers with micro-scale roughness.

• Journal of the Korean Society of Visualization
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2009

During the past three or four decades, the characteristics of turbulent flow have been studied extensively because of their scientific and academic importance. This research deals with the periodic flow oscillation without swirling flow in a 180 degree circular tube using hot wire anemometry, microphone and accelerometer. The frequency regions are observed through the structured oscillation from spectrum. This work carried out to measure the sound level for each Reynolds number, $6{\times}10^4$, $8{\times}10^4$ and $1{\times}10^5$ respectively at the test tube without swirl flow.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.903-911
• /
• 2009

During the past three or four decades, the characteristics of turbulent swirling flow have been studied extensively because of their scientific and academic importance. This research deal with the periodic flow oscillation with and without swirling flow in a 180 degree circular tube using hot wire anemometry, microphone and accelerometer. The frequency regions are observed through the structured oscillation from spectrum. This work carried out to measure the sound level by using hot wire anemometry, microphone and accelerometer for each Reynolds number, $6{\times}10^4$, $8{\times}10^4$ and $1{\times}10^5$ respectively at the entry of the test tube with and without swirl flow.

• Journal of Korean Critical Care Nursing
• /
• v.3 no.1
• /
• pp.53-65
• /
• 2010

Purpose: The purpose of this study was to identify the intensity and types of discomfort caused by an endotracheal tube in patients during ventilator therapy after cardiac surgery, and to analyze the differences in the intensity and types of discomfort by sociodemographic and clinical characteristics and characteristics related to endotracheal tubes. Methods: The intensity of discomfort was measured using an 11-point numeric rating scale and the types of discomfort were measured using a 4-point numeric rating scale. Sociodemographic and clinical characteristics and characteristics related to endotracheal tube were collected by observation and the electronic medical chart using a structured questionnaire. Results: The mean intensity of discomfort in patients due to endotracheal tubes was 6,91 points, 84% of patients reported discomfort over 5 points, The most severe discomfort was pain during endotracheal suctioning, and dry mouth and breathing difficulties were also found to induce discomfort. Patients who had more severe surgical site pain, longer duration of intubation and higher cuff pressure demonstrated more severe discomfort due to the endotracheal tube. Conclusion: These results can be used as basic data for developing nursing intervention to relieve the discomfort caused by endotracheal tubes in patients during ventilator therapy.

• The Journal of Information Systems
• /
• v.30 no.4
• /
• pp.173-202
• /
• 2021

Purpose This study explored overall phenomena in context such as YouTube channel operation, strategy, and profit generation through interviews with two research participants who started their own businesses and are recognized as influencer on YouTube and analysis of viewer responses to uploaded contents. With the explosive growth of YouTube content provision and use, previous studies on YouTube are only being conducted individually on YouTube's content, influence, and content providers, so it is need to explore YouTube channel operations and the effect of revenue generation in context from an integrated perspective. Therefore, the purpose of this study is to present an integrated model that provides a specific process by contextually linking the factors and results influencing YouTube channel operation and revenue generation phenomena to individuals and companies who are trying to operate YouTube channels for the first time. Design/methodology/approach This study systematized and structured the overall phenomena in context such as YouTube channel operation, communication strategy, effect on revenue generation, and YouTube channel operation results by selecting interview subjects and collecting data through interviews, and analyzing viewer reactions (likes, comments, etc.). Due to the lack of previous studies exploring integrated phenomena, research analysis used Strauss & Corbin (1998)'s grounded theory approach, which presented inductive research methods to discover new theories by structuring concepts and categories based on detailed observations and information provided by interviewees. Findings The academic implication of this study is that while previous studies are conducted as individual studies on YouTube's content, influence, and content providers in the current situation where YouTube content provision and use are exploding, it integrally explores and presents an integrated model throughout the process. In addition, taking into account the lack of previous studies, it can be found in the aspect of using the grounded theory approach, an inductive theory approach that establishes a new theory. The practical implications can be found in that it presented practical directions to beginners who want to start operating YouTube channels by identifying operational preparations, communication strategies with viewers, and response management strategies.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.22 no.3
• /
• pp.318-327
• /
• 2015

Purpose: The purposes of this study were to compare confidence in practice of intermittent gavage tube feeding and participants' satisfaction by three types of feedback; professor verbal feedback, professor feedback with smartphone video, and peer feedback with smartphone video. In addition, frequently failed items in the intermittent gavage tube feeding procedure were analyzed. Methods: Data were collected from a convenience sample of 78 nursing college students in November 2014. Students were randomly assigned to the control group, experimental group I (smartphone video with professor feedback) or group II (smartphone video with peer feedback). Data were analyzed using descriptive statistics including chi-square test, ANOVA, and Scheffe test with SPSS 21.0. Results: Confidence in practice of intermittent gavage tube feeding and satisfaction with feedback were highest in experimental group I that had professor feedback with smartphone video. For the procedure, the most frequently failed item was giving an explanation to patients about the purpose and the procedure of tube feeding. Conclusion: The results indicate that professor verbal feedback with smartphone video is the most benefit to the nursing students in acquiring core nursing practice skills.