• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.165-174
• /
• 2021

This study aimed to ascertain whether electronic courses at the deanship of electronic learning and distance education at Umm Al-Qura University meet the quality standards developed by the Quality Matters (QM) organization. This endeavor adopted a mixed method of an explanatory sequential research design for an in-depth understanding of the topic under scrutiny. The sample of the study consisted of ten courses designed at the deanship and reviewed using an evaluation form. The results showed that the courses in focus did not meet the criteria of QM. Based on this finding, a semi-structured interview was designed to collect relevant data from the syllabus designers at the deanship. The interviews yielded information on the difficulties the course designers faced when designing QM-criteria-based courses. The results obtained from the interviews showed that the designers experienced administrative, technical, and faculty-member-related challenges that, when producing online courses, intercepted their way to achieving the QM standards. The study closed with some recommendations, the most important of which is a call for re-developing online courses in alignment with the well-recognized QM standards.

• 한국식품과학회지
• /
• 제36권4호
• /
• pp.531-536
• /
• 2004

Omega-3 지방산인 DHA가 풍부하고 이취가 적은 조류(microalgae, Schizochytrum sp.)로부터 지질을 획득하여 이를 옥수수유와 기질로 이용, 고정화효소인 RM IM(from Rhizomucormiehei)을 촉매로 하여 interesterification 반응에 의해 고기능성 유지를 효과적으로 생성하기 위하여 합성조건을 반응표면분석에 의해 최적화하였다. 항온교반수조에서 소량 합성된 재구성 지질의 TG 지방산 조성 분석 결과, 재구성지질에 함유된 DHA의 함량은 15.06mol%를 나타내었고, DHA-enriched algae oil에 과량 함유된 palmitic acid(30.67mo1%), myristic acid(11.64mol%)의 함량은 각각 30, 60% 감소하여 21.70, 4.96 mol%를 보였으며, oleic과 linoleic acid의 함량은 급격히 증가하여 각각 20.20, 27.34 mo1%를 나타내었다. RP HPLC-ELSD system을 이용하여 재구성지질의 TG 형태를 분리한 결과, 두 기질에 존재하지 않은 다수의 새로운 TG peak를 확인한 수 있었으며, 이중 쉽게 식별이 가능한 3개의 peak를 선택, 이들 peak area% 총합을 반응변수로 하고 온도$(35-75^{\circ}C,\;X_1)$, 시간(2-42시간, $X_2$) 및 효소농도(2-14%, $X_3$)를 요인변수로 하여 중심합성계획에 의해 반응조건을 최적화하였다. 그 결과, 온도$(70.28^{\circ}C)$, 시간(28.74시간), 효소농도(11.30%)의 최적합성조건에서 최대값 6.97 area%로 예측되었다.

• 한국식품영양과학회지
• /
• 제39권8호
• /
• pp.1156-1164
• /
• 2010

미강유(RBO)와 달맞이꽃 종자유(EPO)를 기질로 한 다양한 몰비율(1:3, 1:4, 1:5)을 가지고 효소촉매를 이용한 재구성 지질을 합성하였다. 달맞이꽃 종자유의 주요 지방산은 필수 지방산인 linoleic acid(C18:2)와 $\gamma$-linolenic acid(C18:3n-6)가 각각 74.9%와 8.1%를 차지하였다. 비율별로 합성된 재구성 지질의 주요 지방산을 살펴보면 oleic acid, linoleic acid, $\gamma$-linolenic acid가 전체 지방산 조성의 88% 이상을 차지하였다. 합성한 재구성 지질은 $\gamma$-linolenic acid를 각각 7.2%(1:3)와 7.9%(1:4), 8.3%(1:5)로 함유하였다. 반응에 사용된 기질 및 합성된 재구성 지질의 TAG 조성을 reversed-phase HPLC를 이용하여 분석한 결과, 미강유의 비율이 증가할수록 달맞이꽃 종자유의 주요한 peak인 LLL(trilinolein) peak는 감소하였고, 새로운 peak의 형성은 점차 증가하였다. 재구성 지질 및 반응에 사용된 미강유와 달맞이꽃 종자유의 $\alpha$-, $\gamma$-, $\delta$-tocopherol 함량을 분석한 결과, 미강유는 $\alpha$-tocopherol과 $\gamma$-tocopherol이 각각 7.60, 2.11(mg/100 g) 함량을 나타내었으며, $\delta$-tocopherol은 검출되지 않았다. 달맞이꽃 종자유는 $\alpha$-tocopherol 및 $\gamma$-tocopherol은 각각 13.36과 10.82(mg/100 g)를 나타내었다. Phytosterol 함량은 달맞이꽃 종자유가 744.49 mg/100 g으로 가장 높은 수치를 보였고, 미강유는 606.64 mg/100 g이었다. 한편, scale-up한 재구성 지질의 phytosterol 함량을 분석해 본 결과, 반응하기 전 campesterol, stigmasterol 및 $\beta$-sitosterol 함량이 3시간 반응 후 감소하였다. 이로써 필수지방산인 $\gamma$-linolenic acid를 함유한 재구성지질을 효소를 이용하여 성공적으로 합성하였다.

• 한국식품저장유통학회지
• /
• 제15권3호
• /
• pp.437-444
• /
• 2008

본 연구에서는 DHA-enriched fish oil 과 대두유를 비율(w/w)을 달리하여 반응시키고 그 특성을 알아보았다. 어유의 비율이 증가할수록 trilinolein(LLL) peak는 감소하였고, 새로운 피크의 형성은 점차 증가하였다. 재구성 지질(어유 : 대두유 = 5 : 5, w/w, $55^{\circ}C$, 240, 180 rpm)의 지방산 조성 분석 결과 대두유에서 볼 수 없었던 DHA가 약 13% 증가한 반면, linoleic acid는 24.17% 감소하였으며 포화 지방산의 함량은 약 23%, 불포화 지방산의 함량은 약 77%이었다. 위치별 지방산 함량으로 sn-2 position은 약 linoleic acid 28%, oleic acid 22%, DHA 18% 그리고 palmitic acid 17% 이었다 재구성 지질의 tocopherol 분석 결과 $\alpha$, $\gamma$, and $\delta$-tocopherol 함량은 각각 23.58 mg/100 g, 32.28 mg/100 g, 17.94 mg/100 g이었다. 대두유와 비교하여 재구성 지질의 $\alpha$-tocopherol은 2.1배 증가하였으며, $\gamma$-tocopherol은 1.6배 감소하였다. 유지의 산패 정도를 알아보기 위하여 유도기간(induction period)을 측정한 결과 기질로 사용한 어유 보다는 대두유와 어유를 반응시킨 재구성 지질의 유도기간이 길었으며, 재구성 지질에 항산화제를 첨가한 군 간의 유도기간은 단일 항산화제를 첨가한 군이 최대 2.1배 길었다. 그리고 항산화제 첨가에 따른 향기 패턴을 알아본 결과 항산화제를 첨가하지 않은 그룹과 항산화제를 첨가한 그룹간에 향기 패턴에 차이가 있음을 확인하였다.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.501-507
• /
• 2010

Changes in surface morphology and roughness of dc sputtered ZnO:Al/Ag back reflectors by varying the deposition temperature and their influence on the performance of flexible silicon thin film solar cells were systematically investigated. By increasing the deposition temperature from $25^{\circ}C$ to $500^{\circ}C$, the grain size of Ag thin films increased from 100 nm to 1000 nm and the grain size distribution became irregular, which resulted in an increment of surface roughness from 6.6 nm to 46.6 nm. Even after the 100 nm thick ZnO:Al film deposition, the surface morphology and roughness of the ZnO:Al/Ag double structured back reflectors were the same as those of the Ag layers, meaning that the ZnO:Al films were deposited conformally on the Ag films without unnecessary changes in the surfacefeatures. The diffused reflectance of the back reflectors improved significantly with the increasing grain size and surface roughness of the Ag films, and in particular, an enhanced diffused reflectance in the long wavelength over 800 nm was observed in the Ag back reflectors deposited at $500^{\circ}C$, which had an irregular grain size distribution of 200-1000 nm and large surface roughness. The improved light scattering properties on the rough ZnO:Al/Ag back reflector surfaces led to an increase of light trapping in the solar cells, and this resulted in a noticeable improvement in the $J_{sc}$ values from 9.94 mA/$cm^2$ for the flat Ag back reflector at $25^{\circ}C$ to 13.36 mA/$cm^2$ for the rough one at $500^{\circ}C$. A conversion efficiency of 7.60% ($V_{oc}$ = 0.93, $J_{sc}$ = 13.36 mA/$cm^2$, FF = 61%) was achieved in the flexible silicon thin film solar cells at this moment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.86-86
• /
• 2012

The new approaches for silicon solar cell of new concept have been actively conducted. Especially, solar cells with wire array structured radial p-n junctions has attracted considerable attention due to the unique advantages of orthogonalizing the direction of light absorption and charge separation while allowing for improved light scattering and trapping. One-dimenstional semiconductor nano/micro structures should be fabricated for radial p-n junction solar cell. Most of silicon wire and/or pillar arrays have been fabricated by vapour-liquid-solid (VLS) growth because of its simple and cheap process. In the case of the VLS method has some weak points, that is, the incorporation of heavy metal catalysts into the growing silicon wire, the high temperature procedure. We have tried new approaches; one is electrochemical etching, the other is noble metal catalytic etching method to overcome those problems. In this talk, the silicon pillar formation will be characterized by investigating the parameters of the electrochemical etching process such as HF concentration ratio of electrolyte, current density, back contact material, temperature of the solution, and large pre-pattern size and pitch. In the noble metal catalytic etching processes, the effect of solution composition and thickness of metal catalyst on the etching rate and morphologies of silicon was investigated. Finally, radial p-n junction wire arrays were fabricated by spin on doping (phosphor), starting from chemical etched p-Si wire arrays. In/Ga eutectic metal was used for contact metal. The energy conversion efficiency of radial p-n junction solar cell is discussed.

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.20-24
• /
• 2017

Recently, three-dimensional (3D) light harvesting structures are highly attracted because of their high light harvesting capacity and charge collection efficiencies. In this study, we have fabricated $Cu_2ZnSn(S_xSe_{1-x})_4$ based 3D thin film solar cells on PR patterned Molybdenum (Mo) substrates using photolithography technique. Specifically, Mo patterns were deposited on PR patterned Mo substrates by sputtering and the thin Cu-Zn-Sn stacked layer was deposited over this Mo patterns by sputtering technique. The stacked Zn-Sn-Cu precursor thin films were sulfo-selenized to form CZTSSe pattern. Finally, CZTSSe absorbers were coated with thin CdS layer using chemical bath deposition and ZnO window layer was deposited over CZTSSe/CdS using DC sputtering technique. Fabricated 3-D solar cells were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF) analysis, Field-emission scanning electron microscopy (FE-SEM) to study their structural, compositional and morphological properties, respectively. The 3% efficiency is achieved for this kind of solar cell. Further efforts will be carried out to improve the performance of solar cell through various optimizations.

• 한국광학회지
• /
• 제31권4호
• /
• pp.169-175
• /
• 2020

격자의 구조가 간단하고 격자의 대조비가 낮은 SBC 시스템 구성을 위한 무편광 유전체 다층박막 회절격자를 설계하였다. SBC 방법으로 결합한 빔의 빔 품질을 높게 유지하기 위하여 회절격자의 파면 왜곡이 최소화되는 구조를 제안하였으며, 오염에 의한 흡수가 발생하지 않고 회절격자를 제작할 수 있는 구조로 회절격자를 최적화 설계하였다. 설계된 회절격자는 1055 nm 중심파장에서 Littrow 각도로 입사하는 경우 무편광 -1차 회절 효율이 99.36%이었으며, 96% 이상의 무편광 회절 효율을 나타내는 공정 여분이 확보되어 있음을 확인하였다.

• 대한치과교정학회지
• /
• 제45권3호
• /
• pp.105-112
• /
• 2015

Objective: A recently developed facial scanning method uses three-dimensional (3D) surface imaging with a light-emitting diode. Such scanning enables surface data to be captured in high-resolution color and at relatively fast speeds. The purpose of this study was to evaluate the accuracy and precision of 3D images obtained using the Morpheus 3D$^{(R)}$ scanner (Morpheus Co., Seoul, Korea). Methods: The sample comprised 30 subjects aged 24.34 years (mean $29.0{\pm}2.5$ years). To test the correlation between direct and 3D image measurements, 21 landmarks were labeled on the face of each subject. Sixteen direct measurements were obtained twice using digital calipers; the same measurements were then made on two sets of 3D facial images. The mean values of measurements obtained from both methods were compared. To investigate the precision, a comparison was made between two sets of measurements taken with each method. Results: When comparing the variables from both methods, five of the 16 possible anthropometric variables were found to be significantly different. However, in 12 of the 16 cases, the mean difference was under 1 mm. The average value of the differences for all variables was 0.75 mm. Precision was high in both methods, with error magnitudes under 0.5 mm. Conclusions: 3D scanning images have high levels of precision and fairly good congruence with traditional anthropometry methods, with mean differences of less than 1 mm. 3D surface imaging using the Morpheus 3D$^{(R)}$ scanner is therefore a clinically acceptable method of recording facial integumental data.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.97-97
• /
• 2010

We demonstrate the hybrid polymer-quantum dot based multi-functional device (Organic bistable devices, Light-emitting diode, and Photovoltaic cell) with a single active-layer structure consisting of CdSe/ZnS semiconductor quantum-dots (QDs) dispersed in a poly N-vinylcarbazole (PVK) and 1,3,5-tirs- (N-phenylbenzimidazol-2-yl) benzene (TPBi) fabricated on indium-tin-oxide (ITO)/glass substrate by using a simple spin coating technique. The multi-functionality of the device as Organic bistable device (OBD), Light Emitting Diode (LED), and Photovoltaic cell can be successfully achieved by adding an electron transport layer (ETL) TPBi to OBD for attaining the functions of LED and Photovoltaic cell in which the lowest unoccupied molecular orbital (LUMO) level of TPBi is positioned at the energy level between the conduction band of CdSe/ZnS and LiF/Al electrode (band-gap engineering). Through transmission electron microscopy (TEM) study, the active layer of the device has a p-i-n structure of a consolidated core-shell structure in which semiconductor QDs are uniformly and isotropically adsorbed on the surface of a p-type polymer core and the n-type small molecular organic materials surround the semiconductor QDs.