• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1189-1192
• /
• 2008

A new mercury-free flat fluorescent lamp with a single cell having dimension 2.2inches across the diagonal, had been developed which shows a wide, stable operating voltage margin, high luminance and luminous efficacy by adopting the bipolar pulse drive scheme. In this paper, the single cell is expanded into a multi-structured configuration to realize a 32inch sized panel across the diagonal by a simple repetition of the single cells. A driving scheme is proposed for a 2-bit areal selective dimming using dual auxiliary electrodes and bipolar drive scheme.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.814-828
• /
• 2013

The LCL resonant inductive power transfer (IPT) system is increasingly used because of its harmonic filtering capabilities, high efficiency at light load, and unity power factor feature. However, the modeling and controller design of this system become extremely difficult because of parameter uncertainty, high-order property, and switching nonlinear property. This paper proposes a frequency and load uncertainty modeling method for the LCL resonant IPT system. By using the linear fractional transformation method, we detach the uncertain part from the system model. A robust control structure with weighting functions is introduced, and a control method using structured singular values is used to enhance the system performance of perturbation rejection and reference tracking. Analysis of the controller performance is provided. The simulation and experimental results verify the robust control method and analysis results. The control method not only guarantees system stability but also improves performance under perturbation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.43-49
• /
• 2002

Gray-colored materials were synthesized from ball-milled ZnO powders under a thermal annealing at 1380$^{\circ}C$ with an argon carrier gas for 3 hours. The synthesized materials were identified to be wurtzitic hexagonal structured ZnO nanowires by X-ray diffraction and scanning electron microscopy. The ZnO nanowires have the long cylinder-like shape of which cross-section is a circle, and these nanowires are in the range 15∼40 nm width and 10-70 $\mu\textrm{m}$ length, respectively. Transmission electron microscopy revealed that these nanowires are single-crystalline and grow along [110] direction. The optical properties of the ZnO nanowires were investigated with photoluminescence. The analytic results revealed that ZnO nanowires have the singly ionized oxygen vacancies in the surface lattices, as they emit strong green light in room temperature PL. In addition, the growth mechanism of the ZnO nanowires can be described by the vapor-solid procedures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.651-657
• /
• 2002

Gray-colored materials were synthesized from ball-milled ZnO powders under a thermal annealing at $1380^{\circ}C$ with an argon carrier gas for 3 hours. The synthesized materials were identified to be wurtzitic hexagonal structured ZnO nanowires by X-ray diffraction and scanning electron microscopy. The ZnO nanowires have the long cylinder-like shape of which cross-section is a circle, and these nanowires are in the range 15~40nm width and 10~70 $\mu m$ length, respectively. Transmission electron microscopy revealed that these nanowires are single-crystalline and grow along ［110］ direction. The optical properties of the ZnO nanowires were investigated with photoluminescence. The analytic results revealed that ZnO nanowires have the singly ionized oxygen vacancies in the surface lattices, as they emit strong green light in room temperature PL. In addition, the growth mechanism of the ZnO nanowires can be described by the vapor-solid procedures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.997-1006
• /
• 2003

LICA technique evolved as a basic fabrication process fur micro-structure. The present report deals with the basic technological features in the sequence of the LIGA technique such as deep x-ray lithography(DXRL), electroplating, and moulding processes at Pohang Light Source (PLS). We designed 3-D structured master for fabrication of polymeric optical wavegude and manufactured polymeric optical wavegude with the same using hot embossing process. Polymeric optical waveguide could be produced with ${\pm}$ 1 $\mu\textrm{m}$ accuracy and good surface roughness.

• Journal of the Korea Society for Simulation
• /
• v.9 no.1
• /
• pp.11-19
• /
• 2000

The main idea behind the Intelligent Networks (IN) concept is the separation of switching function from the service control, in order to meet various service requirements of subscribers and development of new services in time. The (N+l) architecture of the IN service system consists of front-end processors (FEP) and back-end processors (BEP), which is in service in a domestic telecommunication company, and balances the traffic load for services among the processors. Under this architecture, the IN service system can distribute the traffic load dynamically, and M services are easily launched and manipulated minimizing impacts on the existing services. This paper traces the performance of the (N＋1) structured system by means of the simulation approach, and shed a light on the result.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.06a
• /
• pp.40-44
• /
• 2006

Sandwich structures, which are composed of a thick core between two faces, are commonly used in many engineering applications because they combine high stiffness and strength with low weight. Accordingly, the usage of sandwich structure is very widely applied to the aircraft, the automobile and marine industry, etc., because of these advantages. In this paper, we have investigated the buckling protection of an inner structure plate and the useful corrugated configuration for contact, and the fabrication method of the inner structure plate for large area using the continuous molding process. Also, we have guaranteed the accuracy of the molding process through the micro corrugated mold fabrication and secured the accuracy and analyzed aspect properties of the inner structure plate fabricated for a large area using the partial mold process.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.175-180
• /
• 2008

Thermoelectric materials convert temperature difference to electric power for power generation and vice versa for refrigeration. Recent advances in enhancing the thermoelectric figure-of-merit shed light on efficient power generation from the waste heat available in industries and vehicles. Nanoscale phenomena with both nanoscale constituent-embedded bulk samples and nanoscale materials proving enhanced thermoelectric performance have been widely reviewed. Bulk materials of crystal-orientation and nano-structured particle embedding seem to promise a higher thermoelectric figure-of-merit and an effective power generation application. As a preliminary study, Si-Ge nanocomposite was prepared with spark plasma sintering method and its properties were examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.584-587
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which needs laster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.371-374
• /
• 2002

From reverse-engineering's point of view, the main step is the digitizing or gathering three-dimensional points on the target physical model. As well known, the touch or scanning probe gives higher accuracy, while the non-contact digitizing apparatus by use of laser or structured light can rapidly obtain digitized points of great bulk without contacting onto the part surface of the physical model. We propose a digitizing methodology by use of the LK-031 laser displacement sensor, which was tested with a physical model.