• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.24-31
• /
• 2002

The purpose of this study was to analyze the transition on architectural data such as valid indoor length, module, ratio of core, floor height, ceiling height and the type of structured cabling system according to the intelligent building grade through case study of the intelligent office buildings constructed in Korea since 1980. The results of this study were as follows. The average floor height was 3.80m, and it was higher in proportion to the IB grade. The average ceiling height was 2.57m, and it didn't have connection with the IB grade. The module of high frequency in application was $3.0{\times}3.0m$, and it showed 25% in the application frequency. The average valid indoor length was 12.27m. The average ratio of core was 24.49%. The type of high frequency in application for the structured cabling was Access Floor Type, and it showed 31% in the application frequency.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.183-186
• /
• 2003

A vision sensor should be calibrated prior to infer a Euclidian shape reconstruction. A point to point calibration. also referred to as a hard calibration, estimates calibration parameters by means of a set of 3D to 2D point pairs. We proposed a new method for determining a set of 3D to 2D pairs for the structured light hard calibration. It is simply determined based on epipolar geometry between camera image plane and projector plane, and a projector calibrating grid pattern. The projector calibration is divided two stages; world 3D data acquisition Stage and corresponding 2D data acquisition stage. After 3D data points are derived using cross ratio, corresponding 2D point in the projector plane can be determined by the fundamental matrix and horizontal grid ID of a projector calibrating pattern. Euclidian reconstruction can be achieved by linear triangulation. and experimental results from simulation are presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.601-602
• /
• 2006

The primary role of MRP(Material Requirement Planning) is to make a production plan so that we have an exact quantity of right materials on needed time at right place. But the ignorance on capacity constraints makes some problems whenever production schedule is established. To increase the performance of MRP system, a novel approach which is based on new input data structure is suggested. The new input data structure includes all the information about Material BOM, Routing and resource data so that we can easily examine the usage of resources and generate higher performance production plans.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.467-470
• /
• 2000

Vector quantization (VQ) is widely used in many high-quality and high-rate data compression applications such as speech coding, audio coding, image coding and video coding. When the size of a VQ codebook is large, the computational complexity for the full codeword search method is a significant problem for many applications. A number of complexity reduction algorithms have been proposed and investigated using such properties of the codebook as the triangle inequality. This paper proposes a new structured VQ search algorithm that is based on a multi-stage structure for searching for the best codeword. Even using only two stages, a significant complexity reduction can be obtained without any loss of quality.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.18-30
• /
• 2020

Recently, as graph-structured data is widely used in various fields such as social networks and semantic Webs, needs for an effective and efficient search on a large amount of graph data have been increasing. Previous keyword-based search methods often find results by considering only the relevance to a given query. However, they are likely to produce semantically similar results by selecting answers which have high query relevance but share the same content nodes. To improve the diversity of search results, we propose a top-k search method that finds a set of subtrees which are not only relevant but also diverse in terms of the content nodes by controlling their similarity. We define a criterion for a set of diverse answer trees and design two kinds of diversified top-k search algorithms which are based on incremental enumeration and A^⁎ heuristic search, respectively. We also suggest an improvement on the A^⁎ search algorithm to enhance its performance. We show by experiments using real data sets that the proposed heuristic search method can find relevant answers with diverse content nodes efficiently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.649-658
• /
• 2009

Due to limited size and limited battery lifetime of sensor node, one has to address the power saving issue in wireless sensor network. The existing power saving algorithm based on data reuse was proposed for the cluster structured wireless sensor network. We state the problem of existing power saving algorithm and propose new power saving algorithm for tree structured wireless sensor network. The proposed algorithm reduces power consumption by buffering the sensed data at the selected relay node for its data lifetime. The optimum buffering node is selected so that the power saving gain is maximized and at the same time, power consumption among sensor nodes are equally distributed in the network. With computer simulations, it is shown that the proposed algorithm outperforms the conventional algorithm in terms of power saving gain.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.737-740
• /
• 2009

3D VR modeling data can be used for powerful expression in construction, because it gives help to navigate a construction in 3D space easily. But the current status of VR technique visualizes only an external shape of a construction. A construction has not only its external shape data but also its constructive information. The constructive information is very important and can be expressed as the process of construction and deconstruction. Thus we research on recording and replay interface to manipulate 3D structured objects for the process of construction and deconstruction.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3709-3715
• /
• 2023

It is an important work to measure the dimensions of underwater spent fuel assemblies in the nuclear power industry during the overhaul, to judging whether the spent fuel assemblies can continue to be used. In this paper, a three dimensional reconstruction method for underwater spent fuel assemblies of nuclear reactor based on linear structured light is proposed, and the topography and size measurement was carried out based on the reconstructed 3D model. Multiple linear structured light sensors are used to obtain contour size data, and the shape data of the whole spent fuel assembly can be collected by one-dimensional scanning motion. In this paper, we also presented a corrected model to correct the measurement error introduced by lead-glass and water is corrected. Then, we set up an underwater measurement system for spent fuel assembly based on this method. Finally, an underwater measurement experiment is carried out to verify the 3D reconstruction ability and measurement ability of the system, and the measurement error is less than ±0.05 mm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.3
• /
• pp.292-301
• /
• 2024

It is challenging to simultaneously estimate parameters in a stock-recruitment relationship, steepness, and natural mortality rate with the other parameters within an age-structured assessment model even in a data-rich situation. Such a problem leads to uncertainty in estimates of management references such as maximum sustainable yield (MSY), which are affected by those components. The objective of this study was to evaluate the effects of those parameters on MSY by analyzing the process of estimating the MSY. For illustration, we used two data sets: The chub mackerel Scomber japonicus in the Korean waters and the yellowtail flounder Limanda ferruginea in the Southern New England-Mid Atlantic. As a result, the natural mortality rate influenced spawning stock biomass per recruit, yield per recruit, and MSY, while steepness affected MSY. A sensitivity analysis enabled us to estimate the natural mortality rate and steepness. The optimal set of steepness and natural mortality was 1.0 and 0.37 per year for the chub mackerel, and 0.35, and 0.8 per year for the yellowtail flounder, respectively.

• Journal of KIISE:Databases
• /
• v.34 no.5
• /
• pp.465-472
• /
• 2007

With the recent proliferation of the use of semi-structured data such as XML, it becomes more important to efficiently store and manage the semi-structured data. The XML data can be logically modelled as a rooted tree e.g., the DOM tree. In order to process a query on the XML data, we traverse the tree structure. In this paper we present an algorithm that places the XML data to disk blocks. The proposed algorithm assigns a number to each node of the tree in a bottom-up fashion. Then, the nodes are allocated to disk blocks using the assigned number. The proposed algorithm does not need access pattern information, and provides good performance for any access pattern. The characteristics of the proposed method are presented with analysis. Through experiments, we evaluate the performance of the proposed method.