• Title/Summary/Keyword: Structure of Storage

Search Result 1,591, Processing Time 0.03 seconds

PR (1 2 2 1) Signal Decoding for DVD using the Circular Analog Parallel Circuits (순환형 아날로그 병렬 회로망 구조를 이용한 DVD용 PR (1 2 2 1) 신호의 디코딩)

  • Son Hongrak;Kim Hyonjeong;Kim Hyongsuk;Lee Jeongwon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.1 s.343
    • /
    • pp.17-26
    • /
    • 2006
  • The analog Viterbi decoder for the PR (1 2 2 1) which is used for BVD read channel is designed with circular analog parallel circuits. Since the inter symbol interference is serious problem in the high density magnetic storage device or DVD, the PRML technology is normally employed for the purpose of minimizing the decoding error. The feature of the PRML technology is with the multi-level coding according to the predetermined combining rule among the neighboring symbols and with the decoding according to the known combining rule. Though the conventional PRML technology is implemented with the digital circuits, the recent trend towards this end is with the utilization of the analog circuits due to the requirements of higher speed and lower power in the DVD read channel. In this study, the Viterbi decoder which is the bottleneck of the PRML implementation is designed with the analog parallel circuit structure. The designed Viterbi decoder for the PR (1 2 2 1) signal shows 3 times faster in the speed and 1/3 times less in the power consumption than thoseoftheconventionaldigitalcounterpart.

ID-Based Proxy Re-encryption Scheme with Chosen-Ciphertext Security (CCA 안전성을 제공하는 ID기반 프락시 재암호화 기법)

  • Koo, Woo-Kwon;Hwang, Jung-Yeon;Kim, Hyoung-Joong;Lee, Dong-Hoon
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.46 no.1
    • /
    • pp.64-77
    • /
    • 2009
  • A proxy re-encryption scheme allows Alice to temporarily delegate the decryption rights to Bob via a proxy. Alice gives the proxy a re-encryption key so that the proxy can convert a ciphertext for Alice into the ciphertext for Bob. Recently, ID-based proxy re-encryption schemes are receiving considerable attention for a variety of applications such as distributed storage, DRM, and email-forwarding system. And a non-interactive identity-based proxy re-encryption scheme was proposed for achieving CCA-security by Green and Ateniese. In the paper, we show that the identity-based proxy re-encryption scheme is unfortunately vulnerable to a collusion attack. The collusion of a proxy and a malicious user enables two parties to derive other honest users' private keys and thereby decrypt ciphertexts intended for only the honest user. To solve this problem, we propose two ID-based proxy re-encryption scheme schemes, which are proved secure under CPA and CCA in the random oracle model. For achieving CCA-security, we present self-authentication tag based on short signature. Important features of proposed scheme is that ciphertext structure is preserved after the ciphertext is re-encrypted. Therefore it does not lead to ciphertext expansion. And there is no limitation on the number of re-encryption.

Sensitivity Analysis of Model Parameters used in a Coupled Dam-Break/FLO-2D Model to Simulate Flood Inundation (FLO-2D에서 댐붕괴 모형 매개변수의 침수 범위 민감도 분석)

  • Lee, Khil-Ha;Son, Myung-Ho;Kim, Sung-Wook;Yu, Soonyoung;Cho, Jin-Woo;Kim, Jin-Man;Jung, Jung-Kyu
    • The Journal of Engineering Geology
    • /
    • v.24 no.1
    • /
    • pp.53-67
    • /
    • 2014
  • Numerical modeling is commonly used to reproduce the physical phenomena of dam-break and to compile resulting flood hazard maps. The accuracy of a dam-break model depends on the physical structure that describes the volume of storage, breach formation and progress, input variables, and model parameters. Model input and parameters are subjective in that they are prescribed; hence, caution is needed when interpreting the results. This study focuses on three parameters (breach degree ${\theta}$, shape factor P, and collapse rate k) used when the dam-break model is coupled with FLO-2D (a two-dimensional flood simulation model) to estimate flood coverage and depth etc. The results show that the simulation is sensitive to the shape factor P and the collapse rate k but not to the breach degree ${\theta}$. This study will contribute to reducing flood damage from dam-break disasters in the future.

Nanoconfinement of Hydrogen and Carbon Dioxide in Palygorskite (팔리고스카이트 내 수소 및 이산화탄소 나노공간한정)

  • Juhyeok Kim;Kideok D. Kwon
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.36 no.4
    • /
    • pp.221-232
    • /
    • 2023
  • Carbon neutrality requires carbon dioxide reduction technology and alternative green energy sources. Palygorskite is a clay mineral with a ribbon structure and possess a large surface area due to the nanoscale pore size. The clay mineral has been proposed as a potential material to capture carbon dioxide (CO2) and possibly to store eco-friendly hydrogen gas (H2). We report our preliminary results of grand canonical Monte Carlo (GCMC) simulations that investigated the adsorption isotherms and mechanisms of CO2 and H2 into palygorskite nanopores at room temperature. As the chemical potential of gas increased, the adsorbed amount of CO2 or H2 within the palygorskite nanopores increased. Compared to CO2, injection of H2 into palygorskite required higher energy. The mean squared displacement within palygorskite nanopores was much higher for H2 than for CO2, which is consistent with experiments. Our simulations found that CO2 molecules were arranged in a row in the nanopores, while H2 molecules showed highly disordered arrangement. This simulation method is promising for finding Earth materials suitable for CO2 capture and H2 storage and also expected to contribute to fundamental understanding of fluid-mineral interactions in the geological underground.

Multiresolution 4- 8 Tile Hierarchy Construction for Realtime Visualization of Planetary Scale Geological Information (행성 규모 지리 정보의 실시간 시각화를 위한 다계층 4-8 타일 구조의 구축)

  • Jin, Jong-Wook;Wohn, Kwang-Yun
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.9 no.4
    • /
    • pp.12-21
    • /
    • 2006
  • Recently, Very large and high resolution geological data from aerial or satellite imagery are available. Many researches and applications require to do realtime visualization of interest geological area or entire planet. Important operation of wide-spreaded terrain realtime visualization technique is the appropriate model resolution selection from pre-processed multi-resolution model hierarchy depend upon participant's view. For embodying such realtime rendering system with large geometric data, Preprocessing multi-resolution hierarchy from large scale geological information of interest area is required. In this research, recent Cubic multiresolution 4-8 tile hierarchy is selected for global planetary applications. Based upon the tile hierarchy, It constructs the selective terminal level tile mesh for original geological information area and starts to sample individual generated tiles for terminal level tiles. It completes the hierarchy by constructing intermediate tiles with low pass filtering in bottom-up direction. This research embodies series of efficient cubic 4-8 tile hierarchy construction mechanism with out-of-core storage. The planetary scale Mars' geographical altitude data and image data were selected for the experiment.

  • PDF

Adaptive Design Techniques for High-speed Toggle 2.0 NAND Flash Interface Considering Dynamic Internal Voltage Fluctuations (고속 Toggle 2.0 낸드 플래시 인터페이스에서 동적 전압 변동성을 고려한 설계 방법)

  • Yi, Hyun Ju;Han, Tae Hee
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.49 no.9
    • /
    • pp.251-258
    • /
    • 2012
  • Recently, NAND Flash memory structure is evolving from SDR (Single Data Rate) to high speed DDR(Double Data Rate) to fulfill the high performance requirement of SSD and SSS. Accordingly, the proper ways of transferring data that latches valid data stably and minimizing data skew between pins by using PHY(Physical layer) circuit techniques have became new issues. Also, rapid growth of speed in NAND flash increases the operating frequency and power consumption of NAND flash controller. Internal voltage variation margin of NAND flash controller will be narrowed through the smaller geometry and lower internal operating voltage below 1.5V. Therefore, the increase of power budge deviation limits the normal operation range of internal circuit. Affection of OCV(On Chip Variation) deteriorates the voltage variation problem and thus causes internal logic errors. In this case, it is too hard to debug, because it is not functional faults. In this paper, we propose new architecture that maintains the valid timing window in cost effective way under sudden power fluctuation cases. Simulation results show that the proposed technique minimizes the data skew by 379% with reduced area by 20% compared to using PHY circuits.

A Mathematical Model for Coordinated Multiple Reservoir Operation (댐군의 연계운영을 위한 수학적 모형)

  • Kim, Seung-Gwon
    • Journal of Korea Water Resources Association
    • /
    • v.31 no.6
    • /
    • pp.779-793
    • /
    • 1998
  • In this study, for the purpose of water supply planning, we propose a sophisticated multi-period mixed integer programming model that can coordinate the behavior of multi-reservoir operation, minimizing unnecessary spill. It can simulate the system with operating rules which are self- generated by the optimization engine in the algorithm. It is an optimization model in structure, but it indeed simulates the coordinating behavior of multi-reservoir operation. It minimizes the water shortfalls in demand requirements, maintaining flood reserve volume, minimizing unnecessary spill, maximizing hydropower generation release, keeping water storage levels high for efficient hydroelectric turbine operation. This optimization model is a large scale mixed integer programming problem that consists of 3.920 integer variables and 68.658 by 132.384 node-arc incidence matrix for 28 years of data. In order to handle the enormous amount of data generated by a big mathematical model, the utilization of DBMS (data base management system)seems to be inevitable. It has been tested with the Han River multi-reservoir system in Korea, which consists of 2 large multipurpose dams and 3 hydroelectric dams. We demonstrated successfully that there is a good chance of saving substantial amount of water should it be put to use in real time with a good inflow forecasting system.

  • PDF

Comparison of enzyme activities of the native and N-terminal 6xHis-tagged Fe supreoxide dismutase from Streptomyces subrutilus P5 (Streptomyces subrutilus P5의 천연 Fe superoxide dismutase와 N-말단 6xHis-태그가 결합된 Fe superoxide dismutase의 활성비교)

  • Park, Joong-ho;Kim, Jae-heon
    • Korean Journal of Microbiology
    • /
    • v.52 no.2
    • /
    • pp.230-235
    • /
    • 2016
  • This study was carried out to analyze the differences in enzyme activity and stability between the native Fe superoxide dismutase (FeSOD) and the 6xHis-tagged superoxide dismutase (6xHis-FeSOD) of Streptomyces subrutilus P5. The optimum pHs for both native FeSOD and 6xHis-FeSOD were 7, while the pH range of the activity was narrower for the 6xHis-FeSOD. The native FeSOD was stable at pH 4-9, but the 6xHis-FeSOD lost its stability at pH > 9. The temperatures of the optimum activities were same for both types of enzymes. However, the heat stability of the 6xHis-FeSOD was clearly decreased; even at $20^{\circ}C$ the enzyme lost the activity after 360 min. In contrast, the native FeSOD was stable after 720 min at below $40^{\circ}C$. $H_2O_2$ inhibition was occurred already at 0.5 mM for the 6xHis-tagged enzyme. Therefore, from the results that the 6xHis-FeSOD retained the enzyme activity at pH 6-7 and $20-40^{\circ}C$, it can be assumed that the protein structure became destabilized under different storage conditions and sensitive to the enzyme inhibitor.

Evaluation of Mechanical Performance Considering Prolonged Length of Glass Fiber-Reinforced Composite on Structure Weakness by Thermal Stress at Secondary Barrier in Cryogenic Liquified Gas Storage (극저온 액화가스 화물창 2차방벽 구조 열 응력 취약 부 Prolonged 길이 고려 유리섬유 강화 복합재 기계적 물성 평가)

  • Yeon-Jae Jeong;Hee-Tae Kim;Jeong-Dae Kim;Jeong-Hyun Kim;Seul-Kee Kim;Jae-Myung Lee
    • Composites Research
    • /
    • v.36 no.4
    • /
    • pp.246-252
    • /
    • 2023
  • A secondary barrier made of glass fiber reinforced composites has been installed infinitely using automatic bonding machine(ABM) in membrane type LNG cargo containment system (CCS). At the same time, significant thermal stress due to cryogenic heat shrinkage has occurred in the composite on the non-bonding area between the adhesive fixation at both ends. There have been studies from the perspective of structural safety evaluation taking this into account, but none that have analyzed mechanical property taking an prolonged length into account. In this study, 2-parameter Weibull distribution statistical analysis was used to standardize reliable mechanical property for actual length, taking into account the composite's brittle fracture of ceramic material with wide fracture strength dispersion. Related experimental data were obtained by performing uniaxial tensile tests at specific temperatures below cryogenic condition considering LNG environment. As a result, the mechanical strength increased about 1.5 times compared to -20℃ at -70℃ and initial non-linear behavior of fiber stretched was suppressed. As the temperature decreased until the cryogenic, the mechanical strength continued to increase due to cold brittleness. The suggested mechanical property in this study would be employed to secure reliable analysis support material property when assessing the safety of secondary barrier's structures.

A Study on Integration of Healthcare Information Systems based on P2P in Distributed Environment (분산환경에서의 P2P기반 보건의료분야 정보시스템 통합에 관한 연구)

  • Park, Yong-Min;Oh, Young-Hwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.48 no.2
    • /
    • pp.36-42
    • /
    • 2011
  • The current healthcare information systems field to meet the growing demand for healthcare for a variety of building systems and operation, and subsequent information on the budget continues to increase, but the current system, although the association link between the various systems made does not, with organizations with information about each of the standardization and real-time network status data do not consist of various materials, such as insufficient to provide real-time issues have been raised. This paper proposes a Integrated information system on Healthcare based on JXTA to solve problems mentioned above. Until now, in a network environment for data storage and management is the most widely used server-intensive structure, while an increase in users and traffic difficulties in data management and communications services to handle the growing number of servers increase faster than information associated with the cost savings, P2P model in terms of efficient data management has emerged as a new solution. Therefore this paper designs a platform for Integrated information system on Healthcare based on JXTA as a method to integrate health information data and services, and then proves that the new information system on healthcare based on JXTA is the suitable model.