• Wind and Structures
• /
• 제30권4호
• /
• pp.423-432
• /
• 2020

A steel high-rise building (HRB) with 15 stories was analyzed under the dynamic load of wind or four different earthquakes taking into consideration the effect of soil-structure interaction (SSI) and using tuned mass damper (TMD) devices to resist these types of dynamic loads. The behavior of the steel HRB as a lightweight structure subjected to dynamic loads is critical especially for wind load with effect maximum at the top of the building and reduced until the base of the building, while on the contrary for seismic load with effect maximum at the base and reduced until the top of the building. The TMDs as a successful passive resistance method against the effect of wind or earthquakes is used to mitigate their effects on the steel high-rise building. Lateral displacements, top accelerations and straining actions were computed to judge the effectiveness of the TMDs on the response of the steel HRB subjected to wind or earthquakes.

• Smart Structures and Systems
• /
• 제22권6호
• /
• pp.743-751
• /
• 2018

In this project, buckling response of polymeric plates reinforced with carbon nanotubes (CNTs) and coated by magnetostrictive layer was studied. The equivalent nanocomposite properties are determined using Mori-Tanak model considering agglomeration effects. The structure is simulated with first order shear deformation theory (FSDT). Employing strains-displacements, stress-strain, the energy equations of the structure are obtained. Using Hamilton's principal, the governing equations are derived considering the coupling of mechanical displacements and magnetic field. Using Navier method, the buckling load of the sandwich structure is obtained. The influences of volume percent and agglomeration of CNTs, geometrical parameters and magnetic field on the buckling load are investigated. Results show that with increasing volume percent of CNTs, the buckling load increases. In addition, applying magnetic field, increases the frequency of the sandwich structure.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.313-318
• /
• 2008

The blast load is caused by gas or bomb explosions. In this study blast load was simulated using the computer code CONWEP and nonlinear analysis was performed on three-story steel moment frames. It was observed from the analysis results that the response of the structures varied depending on the opening area and the explosive weight.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.780-783
• /
• 2003

In this study, As The Tae Yang Metal company manufactured oil tank inserts welding structure bogie, it is Contributed in stability security of freight car of oil tank through static load test, dynamic characteristics analysis. vibration performance test etc. to verify intensity of bogie frame ＆ body structure

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.269-270
• /
• 2009

• 한국정밀공학회지
• /
• 제14권6호
• /
• pp.22-27
• /
• 1997

In general, the load which acts on the structure is almost independent of time in many locations. In this case. It is difficult to estimate the life with the service load history, because the structure is on the multi- axial and multi-point loading states. In this study, the service load of the excavator which is widely used in industry field was calculated using measured cylinder pressures and displacements. The fatigue life was estimated using the multi-axial and multi-point load counting method. Service load history of 4 pin joint which act independently each other is yielded by mult-axial and multi-point load counting method. The stress spectrum is yielded by superposition of the results of FEM stress analysis applied unit load. Palm- gren-Miner's cumulative Damage is 0.000804 for Von Mises equivalent stress sequence by one side fillet weld S-N curve. This result agress with Bench test results. As a result of this study, the fatigue life esti- mation using the multi-axial and multi-axial and multi-point load counting method is useful.

• 한국해안·해양공학회논문집
• /
• 제25권1호
• /
• pp.20-27
• /
• 2013

태풍에 의해 발생된 파랑하중에 의해 방파제, 안벽 등과 같은 해안구조물 하부의 해저지반 침하가 발생될 수 있다. 만약 해저지반이 모래인 경우, 잔류과잉간극수압발생과 반복적인 파랑하중에 의해 해저지반의 침하현상이 더 발생될 확률이 높아질 것이다. 그러나 대부분의 해안구조물은 설계에서 파랑하중을 정적상태의 등분포하중으로 구조물에만 작용하는 것으로 가정하고 있지만 실제로는 동적인 파랑하중이 구조물과 해저지반에 동시에 작용한다. 따라서 본 연구에서는 시간에 따른 실제파압을 고려하고, 구조물뿐만 아니라 해저지반에도 작용하는 것으로 고려하였다. 수치해석 결과 파랑하중이 구조물과 해저지반에 큰 영향을 미친 것으로 나타났다. 시간에 따른 해저지반의 변형거동이 해석되었으며 해저지반에서 유효응력의 변화와 유효응력경로의 변화를 분명하게 확인할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제20권3호
• /
• pp.640-655
• /
• 2018

최근 도심지 공사가 급증하여 기존 지하구조물의 상부에서 지반굴착 공사가 빈번하게 이루어지고 있다. 특히 지반굴착 후 구조물이 시공되는 경우 굴착 저면 하부 지반 내에서 하중 제하, 재하 과정이 반복되므로 기존 지하구조물에 영향을 미칠 수 있다. 따라서 지반굴착으로 인한 기존 지하구조물의 안정을 유지하기 위해서는 인접부에서의 굴착 및 구조물 하중에 의한 영향을 정확히 파악해야 한다. 본 연구에서는 기존터널 상부에 지반 굴착 및 신규 구조물 하중이 가해지는 경우를 실험적으로 구현하여 인접시공이 기존 터널에 미치는 영향을 파악하였다. 이를 위해 실제 크기의 1/5로 축소한 대형모형시험기를 제작하여 굴착저면과 터널 천단 간의 거리를 일정하게 유지한 체 지반굴착, 구조물 하중의 폭, 기존 터널 중심과 지반 굴착 저면 중심과의 이격거리에 따른 영향을 파악하였다. 연구 결과, 동일 하중 크기에 대하여 굴착 깊이가 깊어질수록 기존 터널에 더 큰 영향을 작용하는 것을 확인하였다. 동일 이격거리에서 기존 터널에 영향은 건물하중 폭 증가에 따라 터널 내공변위가 최대 3배까지 증가하는 것을 확인하였다. 건물하중 폭의 영향이 굴착 깊이보다 더 크게 나타났다. 또한 수평으로 이격하는 경우는 터널 중심에서 1.0D 이격되면 터널 천단변위가 48% 감소하는 것을 확인할 수 있었으며, 이로부터 기존 터널 상부에 터파기 시공 위치에 따른 영향이 가장 크게 발생하는 위치는 1.0D (D: 터널직경)인 것으로 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.661-668
• /
• 2007

In this paper, excitation systems using linear mass shaker (LMS) are presented in order to simulate the wind induced responses of a building structure. The actuator force for the excitation systems is calculated by using the inverse transfer function of a target structural response to the actuator. Filter and envelop function are used such that the error between the wind and actuator induced responses is minimized by preventing the actuator from exciting unexpected modal response and initial transient response. The analyses results from a 76-story benchmark building problem in which wind load obtained by wind tunnel test is given, indicate that the excitation system installed at a specific floor can approximately embody the structural responses induced by the wind load applied to each floor of the structure. The excitation system designed by the proposed method can be effectively used for evaluating the wind response characteristics of a practical building structure and for obtaining an accurate analytical model of the building under wind load.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.210-215
• /
• 2007

In this paper, excitation systems using an active tuned mass damper (ATMD) are presented in order to simulate the wind induced responses of a building structure. The actuator force for the excitation systems is calculated by using the inverse transfer function of a target structural response to the actuator. The analyses results from a 76-story benchmark building problem in which wind load obtained by wind tunnel test is given, indicate that the excitation system installed at a specific floor can approximately embody the structural responses induced by the wind load applied to each floor of the structure. The excitation system designed by the proposed method can be effectively used for evaluating the wind response characteristics of a practical building structure and for obtaining an accurate analytical model of the building under wind load.