• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.63-71
• /
• 2006

When surveying the cultural heritages especially in the case of stone structures, preserving their originalstate is of primary importance. For the effective assessment of survey results of stone structure, thedynamic characteristics of that system should be considered. Dynamic characteristics of stone masonry structures depend on several factors such as coefficients of friction, contact conditions, and number of layers of bonding stones. These factors can be estimated by using the dynamic analysis results. This paper describes a method for natural frequency determination of traditional stone arch bridge subjected to compressive force. For this purpose, multi-layered granite brick models of for arch bridge were made and fundamental frequencies corresponding increasing axial forces were measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.170-173
• /
• 2003

In this paper, we proposed a new bulk LDMOS structure which can be used for RF application, and its fabrication steps were introduced. The simulated devices consist of three types: Bulk device, SLB(SOI Like Bulk), and SOI device. As a result of process and device simulation, we showed electrical characteristics, such as threshold voltage, subthreshold slope, DIBL(Drain Induced Barrier Lowering), off-state current, and breakdown voltage. In this simulation study, the lattice temperature model was adopted to see the device characteristics with lattice temperature during the operation. SLB device structure showed the best breakdown characteristics among the other structures. The breakdown voltage of SLB structure is about 9V, that of bulk is 7V, and that of SOI is 8V.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1686-1688
• /
• 1999

The FLR(Field Limiting Ring) structure with a buried ring is proposed to improve breakdown voltage. The breakdown characteristics of proposed structure is verified by two-dimensional device simulator. ATLAS. It has shown that the breakdown voltage of the proposed structure is increased by 11 % compared with that of the FLR.

• Carbon letters
• /
• v.7 no.2
• /
• pp.114-118
• /
• 2006

Isotropic pitch-based carbon fiber has been activated by steam diluted in nitrogen in order to characterize the microporosity. Especially, 40 wt% burn-off ACFs were prepared from different conditions to compare the pore structure and size. The ACFs were thinly sliced to investigate the inside pores by TEM and image analyzer. As expected, the adsorption characteristics of these ACFs were quite different from one another because of different pore structure and size. Most pores are not slit-shaped but rather round. Small round micropores become broad and irregular as increasing the activation time and temperature.

• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.395-402
• /
• 1995

In general low frequency vibration characteristics like an idleshake is mainly influeced by pillar section properties and joints. So the design technique development of vehicle pillar structures is required to initial design and vehicle development stage. In this paper to develop pillar structure design technique considering low frequency vibration characteristics, strain energy method, design sensitivity analysis method, and design optimization method using commercial finite element analysis program and optimization program are presented.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.548-551
• /
• 1989

Two dimensional numerical analysis program of power VDMOSFET structure has been developed. Modeling and analysis on the electrical characteristics of the device are presented These are available for the device structure optimization and physical understanding of the behavior of the device

• Journal of the Korea Computer Industry Society
• /
• v.9 no.5
• /
• pp.217-222
• /
• 2008

The characteristics of UHF antenna with microstrip structure was studied. Design parameters as center frequency, band width, and VSWR by slot length, stub was analyzed by HFSS simulator. UHF antenna with microstrip structure was fabricated using FR4_epoxy substrate of 4.4 dielectric constant.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.371-373
• /
• 2005

We demonstrated a replica molding technique for producing a self-formed multidomain structure displays (LCDs). The multidomain structure was naturally obtained on a replica mold film having periodic patterns which have two dimensional microgrooves. It was found that with the axially symmetric multidomain structure along the microgrooves exhibits excellent viewing characteristics.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.153-160
• /
• 2007

In this paper, the exact analysis of the parallel coupled line with open stub is presented. This structure shows LPF characteristics with broad stopband and sharp skirt characteristics. We derived the exact Z-matrix expression of the structure. In order to show the validation of the expression we designed $3^{th}$ order Chebyshev LPF using the structure. The simulated data excellently agreed with the predicted values by the calculation using the derived expression.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.481-481
• /
• 2007

The characteristics of slow wave structure employed for backward wave oscillator expected to be a high power microwave source are studied analytically. The slow wave structure is a sinusodially corrugated wall waveguide. The waveguide is designed and transmitted characteristics for microwave are measured in the air. There exist literatures on high efficiency of enhansed radiation from backward wave oscillators involving plasmastudied experimentally another results.