• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.42.1-42.1
• /
• 2015

We model the Spectral Energy Distribution (SED) of Class 0 protostar L1527 IRS using a radiative transfer code RADMC-3D. In addition to the photometry data from literatures, we include the Herschel/PACS data which well covers the far-infrared SED peak of L1527 IRS, providing precise constraints to the density structure and other physical properties of its circumstellar envelope. Previously, Tobin et al. (2013) presented a dust continuum modeling results using a rotating and infalling envelope (Terebey and Shu, & Cassen 1984 ; TSC envelope), which originally describes a power-law density profile (${\rho}{\propto}r-{\alpha}$) with the power-law index (${\alpha}$) of 1.5. However, we find that Herschel/PACS data are better fitted with a shallower power-law density profile. This smaller power-law might be attributed to a inner envelope. Thus, we fit the SED of L1527 IRS with a Bonnor-Ebert sphere, which is a combination of the inner flat-topped and the outer power-law (${\alpha}=2$) density profiles. This Bonnor-Ebert sphere is often used to explain the density profile of prestellar cores, which is considered the earliest stages of star formation. The well-fitted SED with a Bonnor-Ebert sphere suggests that L1527 IRS might have collapsed from a Bonnor-Ebert sphere rather than a singular isothermal sphere.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.117.2-117.2
• /
• 2012

It is generally accepted that sudden compressions of the magnetosphere cause electromagnetic ion cyclotron (EMIC) wave growth by increasing the proton temperature anisotropy. These compression-associated EMIC waves are expected to be on higher latitudes (i.e., higher-L regions close to the magnetopause). In this study we examine Pc1 pulsations, which are believed to be generated by the EMIC instability, observed at subauroral latitude near the nominal plasmapause when the magnetosphere is suddenly compressed by solar wind dynamic pressure variations, using induction magnetometer data obtained from Athabasca, Canada (geomagnetic latitude = 61.7 N, L ~ 4.5). We identified 9 compression-associated Pc1 waves with frequencies of ~0.5-2.0 Hz. The wave activity appears in the horizontal H (positive north) and D (positive eastward) components. All of events show low coherence between H and D components. This indicates that the Pc1 pulsations in H and D oscillate with a different frequency. Thus, we cannot determine the polarization state of the waves. We will discuss the occurrence location of compression-associated Pc1 pulsations, their spectral structure, and wave properties.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.310-316
• /
• 2012

A new method for early caries diagnosis was proposed and tested through a home-made optical examination system that used quantitative light fluorescence (QLF) and digital imaging fiber optic transillumination (FOTI) (DIFOTI), with light sources across a wide spectral range, from 350 nm to 1,000 nm. The front-illuminated infrared light scattering image (FIR) showed similar diagnostic abilities to that of DIFOTI. The FIR method was invented based on the observation that caries lesions lose the high transmittance and low scattering properties of benign enamel tissue. There are various methods for the early diagnosis of caries, such as visual examination, exploration, X-ray radiography, QLF, FOTI, and infrared fluorescence (diagnodent). Among them, methods based on optical properties are regarded as having the most potential. A comparative study was performed between the FOTI, QLF, diagnodent, optical coherence tomography, and FIR scattering image methods, using 20 extracted teeth samples with early caries. A scale of lesion measurement based on optical image contrast was proposed. The statistical analysis showed a significant correlation between the DIFOTI and FIR methods (r = 0.35, p < 0.05). However, the QLF and diagnodent methods showed little association with FIR images, as they have different detection principles as compared with FIR. Tomographic images obtained by OCT, using 1,330 nm super luminescent LED as a gold standard of tooth structure, verified that the FOTI and FIR results correctly represented the lack of homogeneity in dental tissue. The newly proposed FIR method attained similar diagnostic results to those of FOTI, but with an easier approach.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.1
• /
• pp.9-14
• /
• 2020

CuS (copper sulfide) thin films having the same thickness of 100nm were deposited on the glass substrates using by radio frequency (RF) magnetron sputtering method. RF powers were applied as a process variable for the growth of CuS thin films. The structural and optical properties of CuS thin films deposited under different power conditions (40-100W) were studied. XRD analysis revealed that all CuS thin films had hexagonal crystal structure with the preferential growth of (110) planes. As the sputtering power increased, the relative intensity of the peak with respect to the (110) planes decreased. The peaks of the two bands (264cm^-1 and 474cm^-1) indicated in the Raman spectrum exactly matched the typical spectral values of the covellite (CuS). The size and shape of the grains constituting the surface of the CuS thin films deposited under the power condition ranging from 40W to 80W hardly changed. However, the spacing between crystal grains tended to increase in proportion to the increase in sputtering power. The maximum transmittance of CuS thin films grown at 40W to 80W ranged from 50 % to 51 % based on 580nm wavelength, and showed a relatively small decrease of 48% at 100W. The band gap energy of the CuS thin films decreased from 2.62eV (at 40W) to 2.56eV (at 100W) as the sputtering power increased.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.2
• /
• pp.119-123
• /
• 1997

The physicochemical and structural properties of new capsaicin derivative, DA-5018, were examined. The reference standard of this compound was obtained by the recrystallization. A method for the determination of the dissociation constant of the compound is described. pH-solubility and distribution coefficient were determined by chromatographic method. Fundamental properties on thermal behaviors were investigated by TG, DTA and DSC. Structural analysis based on spectroscopic method coincided with the chemical structure of DA-5018. Approximate dissociation constant of the compound determined by UV spectral method was 9.35. Solubilities and partition coefficients in various pH buffer solution appeared pH-dependency. No crystal transition or further transition was found in the thermal analysis. This compound showed good stability, but pH 13 buffer and acetone made some degradative products.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.385-392
• /
• 2014

The isolators have been generally used to reduce a seismic force. If the isolators apply to the nuclear power plants(NPPs), the durability and capacity for the structures and equipments should be ensured during the life time. In this study, the long-term behavior of isolated NPPs was analyzed for ensuring the seismic safety. The properties of isolator due to the age-related degradation were analyzed. And the seismic behavior of isolated buildings was analyzed by considering the aging of rubber bearings in different temperature environments. According to the analysis results, the natural frequency of structures was increased with time. But the maximum acceleration and maximum displacement of isolated structures have not changed significantly. Although the damaged of structure did not occurred by aging of isolators, it was presented that the spectral acceleration at the target frequency of isolated structure increased with the temperature. Therefore the isolators in the isolated buildings should be carefully designed and manufactured considering the temperature-dependancy of rubber material.

• Journal of the Korean Chemical Society
• /
• v.40 no.7
• /
• pp.526-530
• /
• 1996

3-(N-Alkylamino)-4,5-dihydro-1,2,5-thiadiazole 1,1-dioxides have been prepared by the treatment of 3-imino-1,2,5-thiadiazolidine 1,1-dioxides with alkylamines. The selected spectral properties of these heterocycles are detailed, as well as an X-ray crystallographic structure of a representative member of these compounds. 3-(N-Benzylamino)-4,5-dihydro-4-(4'-methoxyphenyl)-1,2,5-thiadiazole 1,1-dioxide crystallyzes in space group $P2_1a$, monoclinic, with $a=22.512(3)(1)\AA$, $b=9.831(2)\AA$, $c=7.194(4)\AA$, $\beta=96.65(2)$, and Z=4.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.37-46
• /
• 2006

The principal objective of this study is to assess the hierarchical effects of defects on the elastic stiffness properties at different levels of observation. In particular, quantitative damage measures which characterize the fundamental mode of degradation in the form of elastic damage provide quite insightful meanings at the level of constitutive relations and at the level of structures. For illustration, a total of three model problems of increasing complexity, a 1-D bar structure, a 2-D stress concentration problem, and a heterogeneous composite material made of a matrix with particle inclusions. Considering a damage scenario for the particle inclusions the material system degrades from a composite with very stiff inclusions to a porous material with an intact matrix skeleton. In other damage scenario for the matrix, the material system degrades from a composite made of a very stiff skeleton to a disconnected assembly of particles because of progressive matrix erosion. The trace-back and forth of tight bounds in terms of the reduction of the lowest eigenvalues are extensively discussed at different levels of observation.

• Korean Journal of Remote Sensing
• /
• v.19 no.2
• /
• pp.135-147
• /
• 2003

This study used the multistage hierarchical clustering image classification to analyze the satellite images for the land-cover types of an area in the Korean peninsula. The multistage algorithm consists of two stages. The first stage performs region-growing segmentation by employing a hierarchical clustering procedure with the restriction that pixels in a cluster must be spatially contiguous, and finally the whole image space is segmented into sub-regions where adjacent regions have different physical properties. Without spatial constraints for merging, the second stage clusters the segments resulting from the previous stage. The image classification of hierarchical clustering, which merges step-by step two small groups into one large one based on the hierarchical structure of digital imagery, generates a hierarchical tree of the relation between the classified regions. The experimental results show that the hierarchical tree has the detailed information on the hierarchical structure of land-use and more detailed spectral information is required for the correct analysis of land-cover types.

• Journal of Life Science
• /
• v.27 no.12
• /
• pp.1500-1506
• /
• 2017

Plants are reservoirs of naturally occurring chemical compounds and of structurally diverse bioactive molecules. The aim of this investigation was to screen for the presence of phytochemicals responsible for the lipolysis activity in mulberry (Morus alba) leaves, which are important in traditional Asian medicinal plants. Powdered mulberry leaves were extracted with hexane, ethyl acetate, and methanol. Daucosterol was isolated from the EtOAc extract of mulberry leaves, and its structure was elucidated by NMR spectral analyses. The NMR assignments for the compound were determined using $^1H$, $^{13}C$, DEPT, COSY, HSQC, and HMBC NMR spectral data. Daucosterol showed a concentration-dependent lipolysis activity that may impart medicinal properties that can be exploited by medical practitioners for the treatment of various diseases. However, further studies should be conducted to elucidate additional mechanisms of daucosterol.