• Advances in Computational Design
• /
• 제7권3호
• /
• pp.229-251
• /
• 2022

In 2017, an intraplate earthquake of Mw 7.1 occurred 120 km from Mexico City (CDMX). Most collapsed structural buildings stroked by the earthquake were flat slab systems joined to reinforced concrete (RC) columns, unreinforced masonry, confined masonry, and dual systems. This article presents the simulated response of an actual six-story RC frame building with masonry infill walls that did not collapse during the 2017 earthquake. It has a structural system similar to that of many of the collapsed buildings and is located in a high seismic amplification zone. Five 3D numerical models were used in the study to model the seismic response of the building. The building dynamic properties were identified using an ambient vibration test (AVT), enabling validation of the building's finite element models. Several assumptions were made to calibrate the numerical model to the properties identified from the AVT, such as the presence of adjacent buildings, variations in masonry properties, soil-foundation-structure interaction, and the contribution of non-structural elements. The results showed that the infill masonry wall would act as a compression strut and crack along the transverse direction because the shear stresses in the original model (0.85 MPa) exceeded the shear strength (0.38 MPa). In compression, the strut presents lower stresses (3.42 MPa) well below its capacity (6.8 MPa). Although the non-structural elements were not considered to be part of the lateral resistant system, the results showed that these elements could contribute by resisting part of the base shear force, reaching a force of 82 kN.

• 한국공간구조학회논문집
• /
• 제22권3호
• /
• pp.33-40
• /
• 2022

Recently, cultural heritages in South Korea gain many interests of restoration and preservation from the government since many of that have been severely damaged during earthquakes. Many previous studies in both terms of experimental and analytical approaches have been done to examine structural behavior and decide appropriate methods of preservation. Being motivated by such researches, this research aims to investigate a religious stone pagoda dated back to the Goryeo Dynasty in Korea. The structure consists of a granite stone foundation and baked bricks, which resembles the shape of traditional pagodas. In order to examine the structural behavior of the pagoda, an analytical model is implemented using ANSYS, a comprehensive engineering simulation platform. For the time history analysis of the pagoda, several earthquake excitations are chosen and input to simulation modeling. Seismic response of the tower such as time domain, natural frequency, modal shapes and peak acceleration measured at each layer are presented and discussed. In addition, the amplification ratio of the tower is calculated from the accelerations of each layer to determine tower stability in accordance with Korean seismic design guide. The determination and evaluation of status and response of the brick tower by simulation analysis play an important role in the preservation of history as well as valuable architectural heritages in South Korea.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.36-42
• /
• 2022

Globally, as population growth and economic development continue, resource consumption is increasing rapidly. As an alternative to electric vehicles was suggested as the environmental pollution problem emerged, the number of registered electric vehicles in Korea increased by more than 137 times compared to 2013. Secondary batteries are expected to expand into various markets such as small IT devices and electric vehicles, and the most important part of electric vehicles is the battery (secondary battery). Therefore, in this study, to analyze the stability of the CSM (Classifier Separator Mill) grinding disc that crushes secondary battery raw materials, structural analysis and vibration analysis of the 1st to 4th grinding discs and the final model were performed. The change of bending by the weight of the Grinding Disc is at least 0.065㎛ and maximum 0.075㎛, and the change by the standard gravity is judged to be very low. The strain is at least 0.00031㎛/㎛ and maximum 0.00078㎛/㎛, and even if the number of Hamer increases, the change by the weight is judged to be insignificant. When the Grinding Disc rotates at a maximum of 6000rpm, the deformation and deformation rate of the first to third models are similar, but the fourth model (Hamer 10EA) is more than three times and the final model (Hamer 12EA) is about four times. However, the maximum deformation is 28.21㎛, which is considered to be insignificant when the change is 6000rpm. Six modes of natural Frequency analysis of the 1st~4th order and final model of the grinding disc appeared to be bent or twisted.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.452-459
• /
• 2023

The core power control is an important issue for the study of dynamic characteristics in China initiative accelerator driven subcritical system (CiADS), which has direct impact on the control strategy and safety analysis process. The CiADS is an experimental facility that is only controlled by the proton beam intensity without considering the control rods in the current engineering design stage. In order to get the optimized operation scheme with the stable and reliable features, the variation of beam intensity using the continuous and periodic control approaches has been adopted, and the change of collimator and the adjusting of duty ratio have been proposed in the power control process. Considering the neutronics and the thermal-hydraulics characteristics in CiADS, the physical model for the core power control has been established by means of the point reactor kinetics method and the lumped parameter method. Moreover, the multi-inputs single-output (MISO) logical structure for the power control process has been constructed using proportional integral derivative (PID) controller, and the meta-heuristic algorithm has been employed to obtain the global optimized parameters for the stable running mode without producing large perturbations. Finally, the verification and validation of the control method have been tested based on the reference scenarios in considering the disturbances of spallation neutron source and inlet temperature respectively, where all the numerical results reveal that the optimization method has satisfactory performance in the CiADS core power control scenarios.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제8권6호
• /
• pp.939-946
• /
• 2018

본 논문에서는 그래핀의 우수한 전기적 기계적 특성을 이용하여 정전기 인력에 의하여 휘어지는 그래핀이 수직 팁 게이트에 접촉 여부에 따라서 스위칭이 이루어지도록 조절할 수 있는 3단자 그래핀 NEMS 스위칭 소자에 대하여 연구하였다. 전형적인 MEMS 제작 공정을 이용하여 3단가 그래핀 NEMS 스위칭 소자 제작을 위한 공정을 설계하였고, 그 동작의 핵심 역학은 그래핀에 작용하는 정전기력과 그래핀 자체의 탄성력에 의하여 스우칭의 기계적인 동작이 설명될 수 있었다. 전기적인 동작에서는 그래핀과 핀 전극 사이의 접촉에 의한 접촉 전류와 그래핀이 전극에 접촉하지 않았음에도 그래핀과 핀 전극 사이의 강한 전기장으로 인한 방출전류가 흐를 수 있을 것으로 예상되었다. 실제 기계적인 동작에서 원자단위에서의 움직임을 분석하기 위하여 분자동력학 시뮬레이션 방법을 사용하여 수직 팁 게이트를 가지는 그래핀 기반 3단자 NEMS 스위치 동작에 관하여 연구하여, 기계적인 동작에 따라서 발생되는 다양한 현상들을 분자동력학 시뮬레이션을 통하여 연구함으로써 원자단위에서 이루어지는 다양한 역학들을 살펴보았다.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.213-221
• /
• 2023

The demand for Liquefied Natural Gas (LNG) carriers and LNG-fueled ships has significantly increased in recent years due to the sulfur-oxide emission regulations by the International Maritime Organization (IMO). The main goal of this paper is to introduce the process for the Engineering Critical Assessment (ECA) of IMO independent type-B cargo tanks made from 9% nickel alloy. A methodology proposed by the British Standard was used to conduct ECA for any structure with initial flaws. Based on this standard, a Matlab code was developed to perform ECA. Coarse mesh Finite Element Analysis (FEA) was performed on an independent type-B LNG cargo tank with a capacity of 15,000 m³. The location with the highest development of maximum principal stress was identified at the bottom of the cargo tank. Fine mesh FEA was performed to obtain the stress range required for ECA. The dynamic cargo tank loads used for FEA were determined using some ship rules presented by Det Norske Veritas. As a result of performing a 20-year long-term crack propagation analysis with a semi-elliptical surface crack, the fracture-to-yield ratio exceeded the Fracture Assessment Line (FAL) and some structural reinforcement was necessary. Performing a 15-day short-term crack propagation analysis, the fracture-to-yield ratio remained within the FAL, and no significant LNG leaks were expected. This paper is believed to provide a guide for performing ECA of LNG cargo tanks in the future by providing the basic theory and application sample necessary to perform ECA.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2021년도 추계학술대회
• /
• pp.132-133
• /
• 2021

In recent years, energy harvesting from natural sources and waste heat has been attracting more attention from researchers in response to ever-growing energy demands, high energy prices, and climate-change-mitigation purposes. It is also an important step towards future sustainable energy usages. In thermal dynamic cycles, expanders are playing as the most important equipment for waste heat recovery and energy harvesting as well. As a kind of expander, the bladeless turbine has a promising future and more widely using owning its advantages on relatively long life, good off-design performance, easy operation cleaning and maintenance, a simple structure, no blade corrosion, and low manufacturing costs. There are numerous studies about using the Tesla Turbine as a key technology for energy harvesting in a wide range of applications and conditions. They are presented to help identify technologies that have sufficient potential for applicating to our life and marine industrial engineering. This review paper, initially, presents an overview of current studies both theoretical and experimental of Tesla Turbine usage for waste heat recovery alongside its challenges and investigation on the effect of its configuration, working fluid selection as well. To conclude, future perspectives besides possible ways of transforming waste heat energy to electricity or work, which leads to circular energy, are discussed. The ambition of this paper is to act as a first-hand reference, through the well-defined possible directions, to the young researchers and senior scientists.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.162-171
• /
• 2023

본 연구에서는 기존 구조물의 면내 보강을 위해 콘크리트 구조물과 보강재를 쉽게 연결할 수 있는 내진 어댑터의 세부 설계 방안을 제안하였다. 제안된 내진 어댑터는 실제 크기의 절반으로 축소된 2층짜리 기둥-보 구조물에서 동적 시뮬레이션을 통해 성능을 테스트하였다. 실험 결과, 내진 어댑터를 사용하여 보강된 시험체는 보강되지 않은 시험체에 비해 에너지 소산 능력이 3.5배 향상되었음을 보여주어, 일반적인 사용 범위 내에서 내진 어댑터가 손상되지 않았음이 확인되어 그 효과를 입증하였다. 이어서 변형 한계(변형 각도 3.3%)까지 하중을 가했을 때, 1층 하부에서 어댑터와 보강재를 연결하는 M10 볼트 중 하나가 파손된 것을 관찰하였다. 이러한 발견을 고려할 때, 실제 상황에서 내진 보강을 적용할 때는 내진 어댑터를 연결하는 볼트와 앵커의 설계에 중점을 둬야 할 것으로 판단되었다.

• 항공우주시스템공학회지
• /
• 제18권3호
• /
• pp.56-64
• /
• 2024

본 연구에서는 항공우주구조물의 낙하 충격 특성 및 기초 시험, 학술적 연구를 종합적으로 수행하기 위하여 낙하충격시험기를 개발하였다. 낙하충격시험기는 항공기가 지면과의 충돌 시 발생하는 동적인 응력과 변형에 대한 정확한 평가를 가능하게 하며, 안전성 및 기구 강도와 같은 중요한 설계 요소들을 확인할 수 있도록 한다. 낙하충격시험기는 전자석을 이용하여 시험체를 부착 및 낙하하며, 크레인을 이용하여 시험체 낙하 높이 조절이 가능하도록 구성하였다. 또한, 수직 낙하를 위한 낙하보조장치를 제작하였다. 시험을 위한 낙하 시험체의 수치해석을 수행하고 낙하충격시험기를 활용하여 기초 시험을 수행하였다. 해석 및 시험 결과를 통해 착륙장치 낙하 상황에서의 구조적 형상을 분석하고 각 부분의 거동을 종합적으로 평가하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.61-69
• /
• 2024

고가의 혼화재 투입 없이 원심성형 공정 활용으로 콘크리트의 수밀성 증대를 통한 콘크리트 압축강도가 100MPa급인 초고강도 프리스트레스 각형보를 개발하였다. 피암터널 상부구조로 개발된 원심성형 각형보를 지역 소하천의 라멘교에 시공하였으며, 본 연구에서는 정적재하시험을 통하여 계측한 결과와 대상 구조물의 수치해석 결과를 바탕으로 비교, 분석하여 원심성형 각형보 라멘교의 공용내하력과 안전성을 평가하였다. 본 교량의 정·동적 재하시험과 수치해석 결과가 유사하게 나타났으며 원심성형 각형보의 거동을 잘 모사하는 것으로 확인되었다. 합성 라멘교를 구성하는 모든 원심성형 각형보는 설계활하중 하에서 충분한 내하력을 확보하는 것으로 평가되었고 안전성을 확보하여 구조적인 신뢰성을 입증하였다.