• 한국가구학회지
• /
• 제20권4호
• /
• pp.358-373
• /
• 2009

Probability based design(PBD)method has some advantages against current design methods. First, it can provide the quantitative values for the structural safety or capacity through the reliability index, $^{\beta}$. That presented the certainty on the corresponding structure for the designer or user, also that permitted the broad consideration in the safety of structures. In addition, it can give the quantitative lifetime of the related structure in the calculation process of target reliability index. Also, incidental economical efficiency can be expected because decrease of required structural material can be obtained by using the practical material data. Unlikely current deterministic structural design methods, main advantage is the reflection of real condition in the structural design process by application of the data with not small clear specimen but structural size material. Advanced countries, namely America, Canada, Europe, Australia and New Zealand already converted from allowable stress design(ASD) method to PBD method and used as a standard wooden structures code in the late 1980s and 1990s. Other domestic constructions standards such as the steel or concrete constructions accepted and used the PBD methods already. Accordingly, wooden structural design method also should be converted from deterministic ASD to probabilistic LRFD(Load and resistance factor design) in order to keep pace with worldwide demands for PBD. Hence, to suggest the reason of introduction the PBD in domestic wooden structural design and analysis, a brief example was used to show the different reliability index by using the different design methods. Definition, merits and demerits of deterministic ASD and probabilistic LRFD were followed. Also the three examples were presented to show the similarity and differences between ASD and LRFD. Finally, connection problems that might cause a disputation in wooden structural design and analysis were broadly examined.

• 한국환경복원기술학회지
• /
• 제16권2호
• /
• pp.127-135
• /
• 2013

This study was carried out to verify the suitability of GRS(Glass-fiber Reinforced Slag) as natural type landscape stone according to the material property and structural safety performance standards. The structural safety performance of the GRS panel showed 12.4MPa and 16.2MPa each in flexural strength at 2 and 3% content of glass fiber while the flexural strength at 4 and 5% of glass fiber content showed 26.9MPa, and 30.2MPa, respectively, all satisfying the standards. In addition, air-dried gravity was found to be 1.82~1.89 in measuring range at 2~5% level of glass fiber content, satisfy the existing standards 1.8~2.3. In structural safety performance, the range of flexural strength consequent on glass fiber content was surveyed to be 12.8~30.2MPa, all satisfying the performance standards, while 10MPa and more while the compressive strength range was found to be 41.5~53.3MPa, all satisfying the performance standards, 40~60MPa. This study judged the suitability of only the items for a property of matter of landscape stone GRS by applying the natural-form landscape stone GFRC material standard, but in case an installation constructed with GRS material comes into existence later, there should be comprehensive performance guidelines through the research on durability, landscape performance and environmental and ecological performance.

• 해양환경안전학회지
• /
• 제27권2호
• /
• pp.394-401
• /
• 2021

신재생에너지 신규설비 보급이 매년 꾸준히 증가하고 있으며, 그중 개발 확장성이 풍부하고 생산유발계수가 큰 해상풍력 시장이 급성장하고 있다. 특히 서남해 권역은 최고 수준의 해상풍력 잠재량을 보유하고 있으며, 관련 프로젝트들이 추진 중이다. 본 연구는 점토층 지반에 효과적인 해상풍력 하부구조물의 개발에 있어 EUROCODE에 의한 구조물의 설계 절차를 제시하고 구조 안전성을 고찰하여 관련 기술 분야에 이바지함을 목표로 한다. 선행연구에서는 풍력발전기 용량이 5MW급을 주요 대상으로 하였으나, 서남해 해상풍력발전기 시장의 기술 추세에 부합하는 발전 용량 8MW급을 연구 모델로 선정하였다. 이에 본 연구에서는 서남해 지질 조건에 부합하는 하부구조물을 개발하고, 구조 안전성을 유한요소법을 활용하여 검증하였다. 초기 설계안에서 일부 구간을 보강하여 구조 안전성을 확보하였다. 본 연구 결과를 기반으로 하여, 향후 다양한 형태의 하부구조물에 대한 구조 안전성 평가가 가능하며, 전문화된 구조 설계 및 평가 기준을 확립하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.160-168
• /
• 2011

성수대교 삼풍백화점 붕괴사고 등을 계기로 유지관리 분야의 중요성이 대두되면서 1995년 시설물의안전관리에관한특별법이 제정되어 점검 진단이 실시되는 등 본격적인 유지관리체제가 시작됐다. 그러나 점검 진단의 역사가 일천한 관계로 점검 진단에 대한 기술수준이 낮았고 연구 성과 또한 미흡하여 부실 점검 진단에 대한 우려가 상존해 있었다. 이에 2002년 평가제도가 도입되면서 부실 점검 진단 비율이 지속적으로 낮아져 왔다. 그러나 최근 점검 진단 실시결과 평가실적에 따르면 향후 부실 점검 진단비율이 더 이상 낮아지기 힘든 경향을 보이고 있다. 이를 계기로 부실 점검 진단과 관련하여 관련기관의 설문조사와 메커니즘 측면에서 고찰하므로서, 부실 점검 진단이 초래되는 근원적인 문제점을 나열하였고, 이를 바탕으로 현행 평가제도의 개선방향을 제시 하고자 하였다.

• 한국전산구조공학회논문집
• /
• 제37권3호
• /
• pp.197-204
• /
• 2024

본 논문에서는 조선 후기의 대표적인 전통목구조인 수원 화령전 운한각의 구조성능을 평가하였다. 운한각의 가구구성 방식에 맞추어 3차원 구조해석 소프트웨어인 midas Gen으로 해석모델을 정교하게 구축하였다. 정적해석으로 주요 구조부재의 안전성과 사용성을 평가하였고, 고유치해석으로 동적거동특성을 평가하였다. 대부분의 부재가 안전성 및 사용성 기준을 여유 있게 만족하고 있으나, 외목도리에서 휨응력비가 기준을 20.7% 초과하고 있어 이 부재에 대해서는 장기적인 모니터링이 필요하다고 사료된다. 운한각의 고유주기는 1.079초로 비슷한 규모의 전통목구조보다 약간 긴 편이며, 특히 후면 화방벽의 영향으로 2차모드에서 비틀림이 발생한 것으로 분석된다.

• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.1-8
• /
• 2013

The Rural Housing Standard Plans for improving the quality of life and housing stability in rural areas has been developed 87 types from 1994 to 2012. However, some types of Plans do not satisfy the current legal standard in accordance with social and legal changes. Standard plans has the same effect as a building permit, and replace it, so legal suitability of Plans is an important. Therefore, it is required the suitability analysis on the legal standards of Rural Housing Standard Plans. The Purpose of this study is to derive improper types and items of the Rural Housing Standard Plans on the legal standards. In this study, we analyzed its suitability on the legal standards(law on fire-fighting system installation and safety management, energy saving design criteria for buildings, structural checklist for small buildings, the types of drawing for building permit) in accordance with "rules for the operation of standard plans". And we analyzed the utilization of the Rural Housing Standard Plans through downloads from welchon portal.

• 한국환경보건학회지
• /
• 제50권2호
• /
• pp.125-137
• /
• 2024

Background: The Korea Risk Information Surveillance System (K-RISS) was developed to enable the early detection of food and drug safety-related issues. Its goal is to deliver real-time risk indicators generated from ongoing food and drug risk monitoring. However, the existing K-RISS system suffers under several limitations. Objectives: This study aims to augment K-RISS with more detailed indicators and establish a severity standard that takes into account structural changes in the daily time series of K-RISS values. Methods: First, a Delphi survey was conducted to derive the required weights. Second, a control chart, commonly used in statistical process controls, was utilized to detect outliers and establish caution, attention, and serious levels for K-RISS values. Furthermore, Bai and Perron's method was employed to determine structural changes in K-RISS time series. Results: The study incorporated 'closeness to life' and 'sustainability' indicators into K-RISS. It obtained the necessary weights through a survey of experts for integrating variables, combining indicators by data source, and aggregating sub K-RISS values. We defined caution, attention, and serious levels for both average and maximum values of daily K-RISS. Furthermore, when structural changes were detected, leading to significant variations in daily K-RISS values according to different periods, the study systematically verified these changes and derived respective severity levels for each period. Conclusions: This study enhances the existing K-RISS system and introduces more advanced indicators. K-RISS is now more comprehensively equipped to serve as a risk warning index. The study has paved the way for an objective determination of whether the food safety risk index surpasses predefined thresholds through the application of severity levels.

• 상하수도학회지
• /
• 제36권5호
• /
• pp.261-273
• /
• 2022

In this study, we collect water control valves that have had accidents due to existing cracks, etc. are collected, and propose investigation items for strengthening the valve structural safety evaluation through a series of analyzes from valve specifications to physicochemical properties are proposed. The results of this study are as follows. First, there was a large variation in the thickness of the body or flange of the valves to be investigated, which is considered to be very important factor, because it may affect the safety of the valve body against internal pressure and the flange connected with the bolt nut. Second, 60% of the valves under investigation had many voids in the valve body and flange, etc. and the decrease in thickness due to corrosion was relatively large on the inner surface in contact with water rather than the outer surface. It is judged that the investigation of depth included voids is very important factor. Third, all valves to be investigated are made of gray cast iron foam, and therefore it is judged that there is no major problem in chemical composition. It is judged that the chemical composition should be investigated. Fourth, as a physical investigation item, the analysis of metal morphology structure seems to be a very important factor for nodular cast iron from rather than a gray cast iron foam water valve with a flake structure. As it was found to be 46.7~68.8% of the standard recommended by KS, it could have a direct effect on damage such as cracks, and therefore it is judged that the evaluation of tensile strength is very important in evaluating the safety of the valve.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2626-2631
• /
• 2011

In recent carbody design of rolling stocks, the development of a new carbody structure rather than designing the carbody structure by applying a proven new way to design the carbody structure has been applied. Structural requirements of the carbody being equal, the same applies to the carbody structure means that it is possible to design a carbody structure. By kinematic envelope & speed and the environment, etc., the carbody design is in progress. Accordingly, if all conditions are the same as the existing carbody structure by the same criteria is that you can go get the same. Rather than developing a new carbody structure, carbody structure by applying proven that safety is secured is made possible. Proven standard model of the carbody structure of rolling stocks to secure a new carbody design has made it possible to apply. In addition, the size of the different carbody but structural requirements are the same body design is easier to be expected. In this paper, a model standard carbody of rolling stocks is chosen and of a new carbody design that can be applied to the carbody design will attempt to demonstrate the case.

• 한국공간구조학회지
• /
• 제2권2호
• /
• pp.11-15
• /
• 2002

Formerly, it was called a tent and now, it is called membrane structure. If saying a tent, it imagines the tent of Bedouin, Mongolia and North American Indian. It became clear from the excavated wall painting that have been covered with the retractable roof of the canvas on the auditorium at the amphitheater in Pompeii and became a topic. These tents were made of the animal skins or fabric woven with the flax plants, and these tents are still used. However, if saying membrane material at present, it says the one to have applied a coating resin to the textile. Because the base fabric of membrane material is a woven fabric, the relation between the stress and the strain is different to the direction of the weaving thread. Moreover, the tensile force must always occur in the membrane surface. From these reasons, because the membrane structure corresponds to the particular building material and the construction method about the Building Standard Law, it must be examined specially that the membrane structural building have the same or any more safety as the provisions which was set to the Building Standard Law. Therefore, the technical standards about the membrane structural building became indispensable. In the paper, the kinds of the membrane materials, which are used for the membrane structural buildings, and technical standards process of the creating for the membrane structure buildings are introduced. Lastly, some of the soccer stadiums for 2002 FIFA World Cup KOREA/JAPAN which be covered with the roof of the membrane structures are presented.