• 한국항공우주학회지
• /
• 제35권12호
• /
• pp.1082-1088
• /
• 2007

고속 및 고효율의 해양 수송수단에 대한 필요성이 점차 증가되면서 위그선(WIG: Wing in Ground effect)이 차세대 수송수단으로 관심이 집중되고 있다. 이러한 고속 해양 수송선의 구조설계 시 수면에 대한 충격하중은 중요하게 고려되어야 할 하중요소 중의 하나이며 착수하중에 의한 동적거동은 손상을 초래하는 중요한 요소이다. 본 연구에서는 위그선 착수 시 수면 충격하중에 대한 수치해석을 통해 선체의 동적거동을 평가하였다. 착수환경에서의 수면충격하중을 ALE (Arbitrary Lagrangian-Eulerian) 유한요소법을 적용하여 해석을 수행하였으며 3차원 쉘요소를 적용한 전기체 모델을 개발하여 위그선의 착수환경에서 선체의 동적거동을 모사하였다. 착수환경은 정상 착수조건과 측풍에 의한 비정상 착수조건 두 가지를 고려하여 해석을 수행하였으며 이러한 착수환경이 위그선 구조의 정적 구조 안정성에 미치는 영향을 평가하였다

• 한국강구조학회 논문집
• /
• 제12권1호통권44호
• /
• pp.1-8
• /
• 2000

본 연구에서는 보-기둥 접합부 비선형 거동과 부재 기하비선형을 고려할 수 있는 2차 탄성해석 프로그램을 이용하여 20층 가새 철골구조물에서 반강접 접합부가 구조물의 거동에 미치는 영향을 파악하였다. 구조물 전체에 미치는 영향으로 P-delta 효과와 최상층 수평변위를 확인하였고 국부적인 영향으로 부재력 분배 및 부재에 발생하는 조합응력을 조사하였다. 수평하중과 수직하중을 받는 구조물에 가새와 같이 횡력에 저항하는 구조시스템이 있는 경우 전단접합부를 반강접 접합부로 대체하여도 P-delta 효과 및 최상층 수평변위에 문제가 없었으며 부재력 분배에 의하여 펄 부재치수를 줄일 수 있어 경제적인 구조설계가 가능하였다.

• 한국지진공학회논문집
• /
• 제1권3호
• /
• pp.59-68
• /
• 1997

대도시에서 초고층 건물의 필요성은 구조 기술자에게 새로운 문제를 안겨주었다. 기둥축소의 효과는 설계 및 시공에 있어 특별한 주의를 요구한다. 기둥의 축소는 칸막이, 마감, 그리고 설비체계와 같이 수직하중을 지탱하도록 고려되어 있지 않은 비구조적인 요소에 영향을 미친다. 또한 각 기둥의 축소량 차이는 주위의 슬래브 및 보와 같은 부재들을 경사지게 한다. 축소량을 예측하는 목적은 부등 축소량의 차이를 미리 보정하는데 있다. 본 연구는 부동 축소량에 의한 주구조부재의 영향에 대한 내용을 다루었다. 자중으로 인해 초지 수직변위를 갖는 52층 철근콘크리트 구조물에 지진하중을 적용하여 구조물에 미치는 영향을 평가하였다. 각 수직구조요소에 대한 축소량은 전산화된 기둥축소 해석 프로그램을 이용하여 예측되었으며 지진하중으로 인한 축소량이 보정된 구조물과 보정되지 않은 구조물 사이의 응력을 조사하였다.

• 한국의류산업학회지
• /
• 제25권5호
• /
• pp.626-633
• /
• 2023

This study aimed to reveal the structural relationship between the awareness of the 4th industrial revolution, entrepreneurship knowledge, entrepreneurship mind, and entrepreneurship intention in college students majoring in beauty. To this end, the study used a questionnaire to survey college students majoring in beauty. A total of 300 copies of the questionnaire were distributed, and after weeding out insincere responses, 283 copies were used for a final analysis. The analysis was carried out using SPSS 26.0. The results are as follows: First, the awareness of the 4th industrial revolution had a positive effect on entrepreneurship knowledge, entrepreneurship mind, and entrepreneurship intention of the subjects, and entrepreneurship mind had an effect on entrepreneurship intention. Second, it was verified that the goodness of fit of the structural model on the relationship between the awareness of the 4th industrial revolution and entrepreneurship intention was satisfactory. After analyzing the hypotheses on the structural model, it was discovered that all of them were adopted. In respect to the awareness of the 4th industrial revolution and entrepreneurship intention, the indirect effect of entrepreneurship knowledge and entrepreneurship mind were statistically significant. In conclusion, this study investigated the structural relationship between the awareness of the 4th industrial revolution and entrepreneurship in college students majoring in beauty, with the goal of providing basic data for entrepreneurship education.

• Earthquakes and Structures
• /
• 제11권2호
• /
• pp.217-243
• /
• 2016

The linear and nonlinear seismic responses of steel buildings with perimeter moment resisting frames and welded connections (WC) are estimated and compared with those of buildings with post-tensioned connections (PC). Two-dimensional (2D) and three-dimensional (3D) structural representations of the buildings as well as global and local response parameters are considered. The seismic responses and structural damage of steel buildings with PC may be significantly smaller than those of the buildings with typical WC. The reasons for this are that the PC buildings dissipate more hysteretic energy and attract smaller inertia forces. The response reduction is larger for global than for local response parameters. The reduction may significantly vary from one structural representation to another. One of the main reasons for this is that the energy dissipation characteristics are quite different for the 2D and 3D models. In addition, in the case of the 3D models, the contribution of each horizontal component to the axial load on an specific column may be in phase each other during some intervals of time, but for some others they may be out of phase. It is not possible to observe this effect on the 2D structural formulation. The implication of this is that 3D structural representation should be used while estimating the effect of the PC on the structural response. Thus, steel frames with post-tensioned bolted connections are a viable option in high seismicity areas due to the fact that brittle failure is prevented and also because of their reduced response and self-centering capacity.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.35-41
• /
• 2017

The use of engineering plastics in automotive components is increasing with the trend towards improving the car strength and reducing weight. Among the different choices of materials, engineering plastic emerged as the necessary material for achieving lower costs, reduced weight and improved production efficiency. To produce the automotive parts, it is important to predict defect and validation of injection molding prior to design. Injection molding analysis and structural analysis are widely applied as a part of the design process when developing automotive parts. Injection molding analysis, in particular, involves a highly complicated mechanism that requires deep knowledge of polymer properties as well as an analytic approach different from that used for a general isotropic material when the molded material is used as a structural material. This is because the parts made of polymer have pre-stress factors such as intrinsic deformation and residual stress. The most important factors for injection molded plastic products are injection molding condition and cavity design, taking into account ease of molding, mass production and application. Despite optimal injection molding conditions and cavity design, however, glass fiber orientation is critically linked to strength reduction. The application of injection molding and structural coupled analysis provides a low-cost solution for product molding and structural validation, all prior to the actual molding. The purpose of this study involves the validation, pre-study, and solution of defect in injection-molded polymer automotive parts using the simulation software for injection molding and structural coupled analysis. Finally, this thesis provides validation of an injection molding and structural coupled analytic mechanism that can demonstrate the effect of glass fiber orientation on mechanical strength. Design improvement ideas for the injection molded product of PPS (Poly Phenylene Sulfide)+40% glass fiber are also suggested.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.183-188
• /
• 2011

In this article, the effect of the crystal structural environment of $Pr^{3+}$ ions on the photoluminescence (PL) characteristics of double tungstates, such as $A(M_{1-X}Pr_X)W_2O_8$ (A=Li, Cs, M = In, Y, Sc, La; $0.007{\leq}x{\leq}0.1$) and $La_{1.96}Pr_{0.04}W_3O_{12}$ are characterized. By varying the ion radius in A and M sites, the structural environment of $Pr^{3+}$ ions were modified. The structural criteria, that is, the point charge electrostatic potentials V around the $Pr^{3+}$ activator, were calculated using the crystal structural parameters. The point charge potential V can be a valid criterion for $^3P_o$ quenching in various double tungstates. When the calculated V values are large (> 6.0), the luminescence from the $^3P_0$ level becomes dominant. When the calculated V values are about 3.8, the $^1D_2$ line appears weakly but $^3P_0$-level luminescence is absent. When the calculated V values are small (< 2.0), the luminescence from the $^1D_2$ level becomes dominant and $^3P_0$-level luminescence is absent. At 2.0$^3P_o$ quenching to $^1D_2$ level occurs substantially in accordance with the structural criterion of the point charge potential model.

• 한국전산구조공학회논문집
• /
• 제35권5호
• /
• pp.317-324
• /
• 2022

본 논문에서는 등가 단자유도를 이용하여 구조부재의 정적변위를 고려하는 해석기법을 제시하였다. 기존의 단자유도 비선형 동적 해석 알고리듬을 구조부재의 초기정적변위의 영향을 고려할 수 있도록 개선하였다. 가정된 폭발하중 지속시간과 부재의 고유주기 비에 따라 정적변위가 최대응답에 미치는 영향의 차이와 폭발하중의 방향과 초기변위의 방향에 따른 차이를 확인하였다. 이에 따라 기존의 응답 차트를 정적변위를 고려할 수 있도록 폭발하중의 형태에 따라 각각 제시하였다. 설계 예제를 정적변위가 고려된 응답 차트에 적용하여 부재의 최대 변위를 비교 및 분석하였다. 본 연구의 결과를 통해 초기 정적변위를 고려한 구조부재의 최대응답을 쉽게 산정할 수 있으며 본 연구에서 제시한 응답 차트는 플랜트 또는 군사시설물의 내폭 설계에 활용될 수 있다.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.367-382
• /
• 2015

This paper aims to conduct the reliability-based assessment of the welded joint in the orthotropic steel bridge deck by use of a mesh-insensitive structural stress (MISS) method, which is an effective numerical procedure to determine the reliable stress distribution adjacent to the weld toe. Both the solid element model and the shell element model are first established to investigate the sensitivity of the element size and the element type in calculating the structural stress under different loading scenarios. In order to achieve realistic condition assessment of the welded joint, the probabilistic approach based on the structural reliability theory is adopted to derive the reliability index and the failure probability by taking into account the uncertainties inherent in the material properties and load conditions. The limit state function is formulated in terms of the structural resistance of the material and the load effect which is described by the structural stress obtained by the MISS method. The reliability index is computed by use of the first-order reliability method (FORM), and compared with a target reliability index to facilitate the safety assessment. The results achieved from this study reveal that the calculation of the structural stress using the MISS method is insensitive to the element size and the element type, and the obtained structural stress results serve as a reliable basis for structural reliability analysis.

• Structural Engineering and Mechanics
• /
• 제36권1호
• /
• pp.79-94
• /
• 2010

This study shows how uncertainties of data like material properties quantitatively have an influence on structural topology optimization results for dynamic problems, here such as both optimal topology and shape. In general, the data uncertainties may result in uncertainties of structural behaviors like deflection or stress in structural analyses. Therefore optimization solutions naturally depend on the uncertainties in structural behaviors, since structural behaviors estimated by the structural analysis method like FEM need to execute optimization procedures. In order to quantitatively estimate the effect of data uncertainties on topology optimization solutions of dynamic problems, a so-called interval analysis is utilized in this study, and it is a well-known non-stochastic approach for uncertainty estimate. Topology optimization is realized by using a typical SIMP method, and for dynamic problems the optimization seeks to maximize the first-order eigenfrequency subject to a given material limit like a volume. Numerical applications topologically optimizing dynamic wall structures with varied supports are studied to verify the non-stochastic interval analysis is also suitable to estimate topology optimization results with dynamic problems.