• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.159-166
• /
• 2001

Structural optimization often requires the evaluation of design sensitivities. The Semi Aanalytic method(SAM) for computing sensitivity is popular in shape optimization because this method has several advantages. But when relatively large rigid body motions are identified for individual elements, the SA method shows severe inaccuracy. In this paper, the improvement of design sensitivities corresponding to the rigid body mode is evaluated by exact differentiation of the rigid body modes. Moreover, the error of the SA method caused by numerical difference scheme is alleviated by using a series approximation for the sensitivity derivatives and considering the higher order terms. Finally, this paper shows that the refined SA method including the iterative method improves the results of sensitivity analysis in dynamic problems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.309-314
• /
• 2014

The structural layout of mechanical and civil structures is commonly obtained using conventional methods. For example, the shape of structures such as electric transmission towers and offshore substructures can be generated systematically. However, with rapid advancements in computer graphic technology, advanced structural analyses and optimum design technologies have been implemented. In this study, the structural shape of a jacket substructure for an offshore wind turbine is investigated using a topology optimization technique. The structure is subjected to multiple loads that are intended to simulate the loading conditions during actual operation. The optimization objective function is defined as one that ensures compliance of the structure under the given boundary conditions. Optimization is carried out with constraints on the natural frequency in addition to the volume constraint. The result of a first step model provides quick insights into the optimum layout for the second step structure. Subsequently, a 3D model in the form of the frustum of a quadrilateral pyramid is developed through topology optimization.

• Structural Engineering and Mechanics
• /
• v.51 no.1
• /
• pp.39-66
• /
• 2014

This study deals with the design of bridge girder structures and consists of two parts. In the first part an optimal bridge girder topology is determined using a software based on structure compliance minimization with constraints imposed on the body mass, developed by the authors. In the second part, an original way in which the topology is mapped into a bridge girder structure is shown. Additionally, a method of converting the thickness of the bars obtained using the topology optimization procedure into cross sections is introduced. Moreover, stresses and material consumption for a girder design obtained through topology optimization and a typical truss girder are compared. Concluding, this paper shows that topology optimization is a good tool for obtaining optimal bridge girder designs.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.57-64
• /
• 2024

This study numerically compares optimum solutions generated by element- and node-wise topology optimization designs for free vibration structures, where element-and node-wise denote the use of element and nodal densities as design parameters, respectively. For static problems optimal solution comparisons of the two types for topology optimization designs have already been introduced by the author and many other researchers, and the static structural design is very common. In dynamic topology optimization problems the objective is in general related to maximum Eigenfrequency optimization subject to a given material limit since structures with a high fundamental frequency tend to be reasonable stiff for static loads. Numerical applications topologically maximizing the first natural Eigenfrequency verify the difference of solutions between element-and node-wise topology optimum designs.

• Structural Engineering and Mechanics
• /
• v.43 no.6
• /
• pp.711-724
• /
• 2012

The goal of this study is to conceptually orientate optimized layouts of outrigger belt trusses which are in widespread use today in the design of tall buildings by strut-and-tie truss models utilizing a topology optimization method. In this study unknown strut-and-tie models are realized by using a typical SIMP method of topology optimization methods. In tradition strut-and-tie model designs find the appropriate strut-and-tie trusses along force paths with respect to elastic stress distribution, and then engineers or designers determine the most proper truss models by experience and intuition. It is linked to a trial-and-error procedure based on heuristic strategies. The presented strut-and tie model design by using SIMP provides that belt truss models are automatically and robustly produced by optimal layout information of struts-and-ties conforming to force paths without any trial-and-error. Numerical applications are studied to verify that outrigger belt trusses for tall buildings are optimally chosen by the proposed method for both static and dynamic responses.

• Structural Engineering and Mechanics
• /
• v.88 no.4
• /
• pp.323-334
• /
• 2023

The submerged floating tunnel (SFT) infrastructure has been regarded as an emerging technology that efficiently and safely connects land and islands. The SFT route problem is an essential part of the SFT planning and design phase, with significant impacts on the surrounding environment. This study aims to develop an optimization model considering transportation and structure factors. The SFT routing problem was optimized based on two objective functions, i.e., minimizing total travel time and cumulative strains, using NSGA-II. The proposed model was applied to the section from Mokpo to Jeju Island using road network and wave observation data. As a result of the proposed model, a Pareto optimum curve was obtained, showing a negative correlation between the total travel time and cumulative strain. Based on the inflection points on the Pareto optimum curve, four optimal SFT routes were selected and compared to identify the pros and cons. The travel time savings of the four selected alternatives were estimated to range from 9.9% to 10.5% compared to the non-implemented scenario. In terms of demand, there was a substantial shift in the number of travel and freight trips from airways to railways and roadways. Cumulative strain, calculated based on SFT distance, support structure, and wave energy, was found to be low when the route passed through small islands. The proposed model helps decision-making in the planning and design phases of SFT projects, ultimately contributing to the progress of a safe, efficient, and sustainable SFT infrastructure.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.234-241
• /
• 1996

Recently, Genetic Algorithms(GAs), which consist of genetic operators named selection crossover and mutation, are widely adapted into a search procedure for structural optimization. Contrast to traditional optimal design techniques which use design sensitivity analysis results, GAs are very simple in their algorithms and there is no need of continuity of functions(or functionals) any more in GAs. So, they can be easily applicable to wide territory of design optimization problems. Also, virtue to multi-point search procedure, they have higher probability of convergence to global optimum compared with traditional techniques which take one-point search method. The introduction of basic theory on GAs, and the application examples in combination optimization of ten-member truss structure are presented in this paper.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.97-104
• /
• 2006

The geometric configuration in the weight reduction designis very required to be started from the conceptual design with low cost, high performance and quality. In this point, a structural-topological shape concerned with conceptual design of structure is important. The method used in this paper combines three optimization techniques, where the shape and physical dimensions of the structure and material distribution are hierachically optimized, with the maximum rigidity of structure and lightweight. As the results, the technology of weight reduction design is considered in designs of aluminum control arm and inner panel of door.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.213-224
• /
• 2001

확률론적 구조설계 최적화는 구조물의 역학적 특성이나 하중의 불확실성이나 임의성과 같은 변동성을 정량적이고 합리적으로 고려할 수 있다는 점에서 기존의 전통적인 확정론적 최적화와 비교된다. 확률론적 최적화의 방법론으로는 개선된 일계이차모멘트법을 이용하는 신뢰도지수에 기반한 접근법(MPFP search)이 널리 알려져 있으며, 최근 목표성능치에 기반한 접근법(MPTP search)이 새롭게 제안되었다. 본 논문에서는 이들 두 가지 접근법에 대한 정식화를 수행하고, 특히 탐색과정에서 소모적인 반복계산을 발견하고 제거하는 알고리즘을 제시하였다. 예제에서 두 접근법에 의한 확률론적 최적화를 수행하고 구조설계 최적화의 관점에서 두 접근법의 장단점을 비교·검토하였다.

• Smart Structures and Systems
• /
• v.18 no.4
• /
• pp.733-754
• /
• 2016

Structural optimization involves a large number of structural analyses. When optimizing large structures, these analyses require a considerable amount of computational time and effort. However, there are specific types of structure for which the results of the analysis can be achieved in a much simpler and quicker way thanks to their special repetitive patterns. In this paper, frequency constraint optimization of cyclically repeated space trusses is considered. An efficient technique is used to decompose the large initial eigenproblem into several smaller ones and thus to decrease the required computational time significantly. Some examples are presented in order to illustrate the efficiency of the presented method.