• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.49-56
• /
• 1997

Most large strike-slip faults do not rupture their entire length during single faulting but generally break in segments which are different in location and time of faulting. Studies related to the development of the Yangsan fault have been reported based on partial results from characteristics of geolgocial distribution, geophysical prospecting and paleostress analyses. This paper shows, based on preliminary results, that the Yangsan fault could be divided into four structural areas along entire length. These areas are different in geological distribution, bedding attitude measured from sedimentary rocks, strike of main fault, geometry of small faults, termination types of fault tips, cyclic variation of fault zone width, and arrangement of paleostress. Therefore, the Yangsan fault could be divided into at least four segments.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.69-76
• /
• 1998

Due to the drastic improvement of computer hardware and operating system, it is easy to break through the main defects of limited computer memory and processing time, etc. To keep up with this situation, this paper is focused on developing the preprocessor program with the input method based on vector graphic editor and the preprocessing technique including automatic node generation algorithm for the $\rho$-version finite element program. To develop this preprocessor program, the special data structure and the OOP(Object Oriented Programming) have been used by the Visual Basic 4.0. The Special data structure is proposed to describe the geometric data of node numberings and coordinates suitable for the $\rho$-version finite element program, which are quite different from the comvential h-version finite element program.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.126-133
• /
• 1997

For each construction material used, there is certain theoretical limit in sizes. For tall building construction, the reduction in slab weight is the first step to take in order to break such size limits. In this paper, the feasibility of such objective is proven and given by numerical analysis result. For a typical building slab, both concrete and advanced composite sandwich panels are considered. The concrete slab is treated as a special orthotropic plate to obtain more accurate result. For each panel, the deflection under the dead and live loads is compared, since both tensile and compressive strengths of the composites are far more higher than those of concrete. All types of sandwich panels considered, except one case, have weights less than one tenth of that of reinforced concrete slab, with deflections less than that of the concrete slab. The cost analysis result and manufacturing methods will be reported later.

• 전산구조공학
• /
• 제11권1호
• /
• pp.153-160
• /
• 1998

본 연구에서는 가압열충격 사고로 소형 냉각재 상실사고를 가정하여 냉각재의 온도와 압력의 이력으로 부터 용기 벽의 온도분포를 구하고, 이로 부터 열응력과 압응력을 해석적으로 구하였다. 또 균열 선단에서의 응력강도계수와 파괴인성치를 ASME코드의 방법을 이용하여 구하였고, 이들을 시간에 따라 비교하여 균열의 진전여부를 평가하였다. 원자로 용기 벽에 존재하는 여러 형태의 균열이 견딜 수 있는 최대 기준무연성천이온도를 결정하였으며 평가 결과에 대하여 고찰하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.457-462
• /
• 2007

The high tensile strength of steel cable enabled the development of long span cable bridges which that a better tensile element can break the limitation of current bridge design. A carbon fiber has at least strength as steel cable and is very light material relatively. Due to its characteristics. commercial carbon fiber cables are already used in place of steel prestress tendons. This study proposes a parallel carbon fiber(CF) cable for cable based on NPWS and CFCC cables. Static and nonlinear analyses reveal that the CF cable develops much less stress than the NPWS cable cyclic loads.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.269-272
• /
• 2005

Epoxy resins are gradually becoming some of the most important and versatile polymers in modem civil engineering. Because epoxy resins have some unigue properties, such as toughness, versatility of viscosity and curing conditions, good handling characteristics, high adhesive strength, inertness, low shrinkage compared to most other thermo-setting resins and concrete, and resistance to chemicals, they have found many applications in construction castings, repair materials, road or bridge deck pavements, coatings, and as structural or non structural adhesives. In this applications, epoxy resins are widely used for polymer concretes, grouting materials, injection glues, and sealants. In this paper, characteristics of deformation of repair material after repaired have been investigated by viscosity of repair material and the width of crack. It is believed that flexural strength of epoxy resin with low viscosity is high because tensile strength is high and elongation at break is low, fracture energy is low.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.675-682
• /
• 2010

The flood impact pressure acting on a vertical wall resulting from a dam-breaking problem is simulated using a navier-Stokes(N-S) solver. The N-S solver uses Eulerian Finite Volume Method(FVM) along with Volume Of Fluid(VOF) method for 2-D incompressible free surface flows. A Split Lagrangian Advection(SLA) scheme for VOF method is implemented in this paper. The SLA scheme is developed based on an algorithm of Piecewise Linear Interface Calculation(PLIC). The coupling between the continuity and momentum equations is affected by using a well-known Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) algorithm. Several two-dimensional numerical simulations of the dam-breaking problem are presented to validate the accuracy and demonstrate the capability of the present algorithm. The significance of the time step and grid resolution are also discussed. The computational results are compared with experimental data and with computations by other numerical methods. The results showed a favorable agreement of water impact pressure as well as the global fluid motion.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.165-172
• /
• 1993

A non-linear mathematical model has been developed for the dynamic analysis of the reactor internals. The model includes a lumped mass and stiffness with non-linear members such as gap-spring. As hydrodynamic couplings have also been considered in the model, the effect of fluid/structure interaction between internals components due to their immersion in a confining fluid can be studied for the dynamic response analysis. The reactor internals responses for seismic and pipe break excitations have been calculated for the case of with-and without-hydrodynamic couplings.

• 응용통계연구
• /
• 제18권2호
• /
• pp.253-269
• /
• 2005

회귀모형의 기본가정은 추정된 계수들이 표본 내의 모든 관측값에 대해 일정하다는 것이다. 그러나 자료의 구조적 변화로 인해 모형의 추정계수 중 최소한 일부는 상이한 부분집합으로 전체 표본을 분할해야 하는 경우가 현실적으로는 흔히 존재한다. 본 연구에서는 두 회귀모형 계수들간의 동일성을 검정하는 방법을 확대${\cdot}$일반화하여 자료의 분할시점을 탐색하는 검정절차와 결합시킨 후 이를 최근 가장 큰 사회적 문제가 되고 있는 실업률의 구조변화 발생 여부와 시점을 판별하는 실증분석에 적용시켜 보았다.

• 응용통계연구
• /
• 제27권6호
• /
• pp.1049-1068
• /
• 2014

자기회귀 모형(autoregressive model)은 일변량(univaraite) 시계열자료의 분석에서 널리 사용되는 방법 중 하나이다. 그러나 이 방법은 자료에 일정한 추세가 있다고 가정하기 때문에 자료에 분절(structural break)이 존재할 때 적절하지 않을 수 있다. 이러한 문제점을 해결하기 위한 방법으로 국면전환(regime-switching) 모형인 임계자기회귀 모형(threshold autoregressive model)이 제안되었는데 최근 지연 모수(delay parameter)을 포함한 이 국면전환(two regime-switching) 모형으로 확장되어 많은 연구가 활발히 진행되고 있다. 본 논문에서는 이 국면전환 임계자기회귀 모형을 베이지안(Bayesian) 관점에서 살펴본다. 베이지안 분석을 위해 모수적 임계자기 회귀 모형 뿐만 아니라 디리슐레 과정(Dirichlet Process) 사전분포를 이용하는 비모수적 임계자기 회귀 모형을 고려하도록 한다. 두 가지 베이지안 임계자기 회귀 모형을 바탕으로 사후분포를 유도하고 마코프 체인 몬테 카를로(Markov chain Monte Carlo) 방법을 통해 사후추론을 실시한다. 모형 간의 성능을 비교하기 위해 모의실험을 통한 자료 분석을 고려하고, 더 나아가 한국과 미국의 국내 총생산(Gross Domestic Product)에 대한 실증적 자료 분석을 실시한다.