• Wind and Structures
• /
• 제36권3호
• /
• pp.149-160
• /
• 2023

Lightness and flexibility of membrane roofs make them very sensitive to any external load. One of the most important parameters that controls their behavior, especially under wind load is the sag/span ratio of edge cables. Based on the value of the pretension force in the edge cables and the horizontal projection of the actual area covered by the membrane, an optimized design range of cable sag/span ratios has been determined through carrying on several membrane form-finding analyses. Fully coupled fluid structure dynamic analyses of these membrane roofs are performed under wind load with several conditions using the CFD method. Through investigating the numerical results of these analyses, the behavior of membrane roofs with cables sag/span ratios selected from the previously determined optimized design range has been evaluated.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.535-541
• /
• 2023

Friction material, an integral constituent of bearing supports, facilitates frictional interactions between two components. Polytetrafluoroethylene (PTFE), a commonly employed friction material in bearing supports, has assessed resultant friction equilibrium. Nonetheless, protracted utilization diminishes frictional performance as the lubricating agent is progressively depleted. Friction materials can affect the entire structural system. Hence, this study applied ceramic material as a friction material due to its high strength, low friction, and low deformation. The frictional behavior was investigated using a cyclic friction test, considering various friction materials as the primary design variables and examining their covariance in cyclic frictional movements. The results substantiated that the ceramic friction material yielded a low variance and friction coefficients in cyclic frictional movements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.474-479
• /
• 1998

In this paper, the structural behavior of R.C. multi-layered floor structure including foam concrete layer is numerically analyzed. For the analysis, 3D interface element has been implemented to finite element analysis program to consider the interfacial behavior of multi-layered floor structure which consists of rubber layer, foam concrete layer and mortar layer on RC slab. Based on analysis results on multi-layered structure, its structural behavior is analyzed according to geometrical and material properties of foam concrete. Optimum material property of each layer of the floor structure is proposed to get optimum multi-layered concrete structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.311-318
• /
• 1995

Increases in strength and ductilities of steel fiber reinforced concrete(SFRC) under direct tension and compression result in improvements of flexural behavior of reinforced steel fibrous concrete beam(RSFCB) Use of hooked steel fibers in stead of round steel fibers enhances futher the structural porperties of a beam due to their greater mechanical bond resistance compared to that of round steel fibers. Flexural strength, initial stiffness ductility and failure mechani는 of RSFCB are dependent upon material and structural parameters and among which are the volume fraction of fibers, reinforcement ratio, and casting depth of SFRC in a beam section. The flexural behavior of RSFCB's are examined experimentally in this study and some conclusions are made regarding those effects of main material and structural parameters on the overall behavior of RSFCB.

• Structural Engineering and Mechanics
• /
• 제6권2호
• /
• pp.201-215
• /
• 1998

The structural behavior of reinforced concrete frame infilled with a masonry wall is investigated by the method of discontinuous deformation analysis (DDA). An interface element is developed and it is incorporated into DDA to analyze the continuous and discontinuous behavior of the masonry structure. The numerical results are compared with previous research and possess satisfactory agreement. Then the structural behavior and stress distribution of a reinforced concrete frame infilled with a masonry wall subjected to a horizontal force are studied. In addition, the justification of equivalent strut is assessed by the distribution of principal stresses. The results show that the behavior of the masonry structure is highly influenced by the failure of mortar. On the basis of the distribution of principal stress of the masonry wall in the reinforced concrete frame, the equivalent strut can be approximately substituted for the masonry wall without separation and opening. However, the application of equivalent strut to the masonry wall with separation and opening needs further study.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.453-460
• /
• 2002

Piezoelectric solids such as PZT and PLZT have been widely used as sensors or actuators for various smart structural systems. The main problem occurring in the applications is that a larger and larger actuation force is required to maximize the function of the system. This naturally leads to local concentrations of electric or stress fields near crack tips or geometric irregularities and thereby results in a nonlinear behavior of the system Hence, it becomes more important to Predict the nonlinear behavior of piezoelectric solids In this Paper we investigate the micro-mechanism of nonlinear behavior in piezoelectric materials and propose constitutive equations. The calculation results obtained from an associated finite element Program are shown to be qualitatively consistent with experiments.

• 한국전산구조공학회논문집
• /
• 제33권5호
• /
• pp.339-349
• /
• 2020

외피 구조로서의 강박스와 내부의 철근콘크리트 슬래브로 구성되는 양개형 방폭문은 방호 및 대피 구조물의 출입구에 설치되는 구조체이다. 방폭문과 그 후면의 벽체 사이에는 일정의 설치 간격이 존재하게 되는데, 이로 인한 지지조건 및 구조거동의 변화는 방폭 해석 및 설계에 적절히 고려되지 않고 있다. 본 연구에서는 설치 간격에 의한 지지조건 및 폭압의 변화에 따른 방폭문의 구조응답 및 파괴거동을 유한요소 해석방법으로 비교·분석하였다. 해석 결과에 따르면, 설치 간격 및 폭압의 변화는 방폭문의 최대 처짐 및 영구 처짐과 같은 처짐 거동에 영향을 미치며, 설치 간격이 크고 작음에 따라 방폭문과 벽체의 충돌 접촉 정도 및 이에 의한 충격력이 크게 변화하는 것으로 나타났다. 또한, 방폭문에 작용하는 이와 같은 충격력의 변화는 슬래브의 전단파괴와 같은 파괴거동에 영향을 미치는 주요 요인으로 분석되었다. 설치간격 10mm 미만의 방폭문은 전단파괴에 취약해지고, 15mm 내외 수준인 경우가 휨성능 발현에 비교적 더 적합한 것으로 나타났다. 본 연구에서는 설치 간격 및 폭압과 같이 기본적인 조건의 변화에 한해서 비교 해석을 하였다. 향후, 부재 재원 및 강도변화, 전단설계 여부 등 다양한 변수에 따른 구조거동 변화에 대해 실험적 및 해석적 연구가 필요하다.

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.867-891
• /
• 2016

This paper addresses numerically the behavior of steel structures under Fire-after-Earthquake (FAE) loading. The study is focused on a four-storey library building and takes into account the damage that is induced in structural members due to earthquake. The basic objective is the assessment of both the fire-behavior and the fire-resistance of the structure in the case where the structure is damaged due to earthquake. The combined FAE scenarios involve two different stages: during the first stage, the structure is subjected to the ground motion record, while in the second stage the fire occurs. Different time-acceleration records are examined, each scaled to multiple levels of the Peak Ground Acceleration (PGA) in order to represent more severe earthquakes with lower probability of occurrence. In order to study in a systematic manner the behavior of the structure for the various FAE scenarios, a two-dimensional beam finite element model is developed, using the non-linear finite element analysis code MSC-MARC. The fire resistance of the structure is determined using rotational limits based on the ductility of structural members that are subjected to fire. These limits are temperature dependent and take into account the level of the structural damage at the end of the earthquake and the effect of geometric initial imperfections of structural members.

• Computers and Concrete
• /
• 제17권1호
• /
• pp.141-156
• /
• 2016

The search for new structural systems capable of associating performance and safety requires deeper knowledge regarding the mechanical behavior of structures subject to different loading conditions. The Strut-and-Tie Model is commonly used to structurally designing some reinforced concrete elements and for the regions where geometrical modifications and stress concentrations are observed, called "regions D". This method allows a better structural behavior representation for strength mechanisms in the concrete structures. Nonetheless, the topological model choice depends on the designer's experience regarding compatibility between internal flux of loads, geometry and boundary/initial conditions. Thus, there is some difficulty in its applications, once the model conception presents some uncertainty. In this context, the present work aims to apply the Strut-and-Tie Model to nonlinear structural elements together with a topological optimization method. The topological optimization method adopted considers the progressive stiffness reduction of finite elements with low stress values. The analyses performed could help the structural designer to better understand structural conceptions, guaranteeing the safety and the reliability in the solution of complex problems involving structural concrete.

• 가정과삶의질연구
• /
• 제30권3호
• /
• pp.69-82
• /
• 2012

The purpose of this study was to investigate the degree of sexual behavior. In particular, this study focused on the self-esteem, internet pornography addiction, and relationship satisfaction of freshmen as important predictors of sexual behavior and examined the dynamics of the relationships among the variables. The participants in this research were 1,806 university freshmen: 932 males and 828 females. All respondents submitted their answers on a self-report questionnaire. The data were analyzed with descriptive statistics and Pearson's correlations that used PASW 18.0, and AMOS 18.0, a statistical program for structural equation modeling(SEM), to estimate the hypothesized structural equation model. The major results of this study were as follows: (1) Relationship satisfactions mediated the relationships among self-esteem, internet pornography addiction, and sexual behavior. (2) Sexual behavior between male and female freshmen showed different influences on the test of the structural model invariance across the groups.