• Advances in concrete construction
• /
• 제15권3호
• /
• pp.203-213
• /
• 2023

New techniques, technologies, and materials should be used to design and build sports stadiums. Since this century, much progress has been made in covering the roofs of sports stadiums, and the possibility of accurate computer calculation has been provided for stadiums, so by choosing a new structure, we can double the beauty and resistance of these stadiums. A stadium has an excellent and valuable design when its structure, shell, building, materials, and joinery follow a high architectural idea at all levels and scales. This article examines the mechanical performance of polymer cement strength in the construction of football stadiums, along with their structural knowledge in the form of the best examples in the world. Portland cement is one of the most used materials for constructing football stadiums. However, its production requires spending a lot of money, wasting energy, and damaging the environment. Considering the disadvantages in the production and consumption of concrete in different environments, it is necessary to find alternative materials. It should be used with cheaper, simpler technology, abundant primary resources, energy saving, less environmental damage, and better chemical and physical properties in concrete. High-strength concrete technology is considered a new development in the construction industry of concrete structures. In hardened concrete, strength and durability are two main factors, and as the compressive strength of concrete increases, concrete becomes more brittle. As a result, its tensile strength does not increase in proportion to the increase in compressive strength and has less strain tolerance. For this reason, the need to use is evident from the fibers in high-strength concrete. Fibers are used in concrete to increase tensile strength, prevent crack propagation, and significantly increase softness. The increase with the change of these resistances depends on the strength of concrete without fibers, the shape of fibers, and the percentage of fibers. This cement is obtained from the wastes of chemical and petrochemical industries and the wastes from coal combustion, which have the properties mentioned as substitutes for Portland cement.

• 천문학회보
• /
• 제44권2호
• /
• pp.78.1-78.1
• /
• 2019

There are a huge number of faint objects that have not been observed due to the lack of large and deep surveys. In this study, we demonstrate that a deep learning approach can produce a better quality deep image from a single pass imaging so that could be an alternative of conventional image stacking technique or the expensive large and deep surveys. Using data from the Sloan Digital Sky Survey (SDSS) stripe 82 which provide repeatedly scanned imaging data, a training data set is constructed: g-, r-, and i-band images of single pass data as an input and r-band co-added image as a target. Out of 151 SDSS fields that have been repeatedly scanned 34 times, 120 fields were used for training and 31 fields for validation. The size of a frame selected for the training is 1k by 1k pixel scale. To avoid possible problems caused by the small number of training sets, frames are randomly selected within that field each iteration of training. Every 5000 iterations of training, the performance were evaluated with RMSE, peak signal-to-noise ratio which is given on logarithmic scale, structural symmetry index (SSIM) and difference in SSIM. We continued the training until a GAN model with the best performance is found. We apply the best GAN-model to NGC0941 located in SDSS stripe 82. By comparing the radial surface brightness and photometry error of images, we found the possibility that this technique could generate a deep image with statistics close to the stacked image from a single-pass image.

• 인간식물환경학회지
• /
• 제22권1호
• /
• pp.39-52
• /
• 2019

To evaluate the protective effect of collagen peptide-coated coffee extract on skin aging, cell viability was measured with a MTT assay using cultured CCD-986sk fibroblasts, and its effect on wrinkles in the skin of hairless mice induced by UVB-irradiation was examined. In addition, its effect on procollagen synthesis and anti-oxidative, and its inhibitory activity against collagenase, elastase, tyrosinase and MMP-1 were analysed. After the 30-minute topical treatment, the animals were exposed to UVB irradiation (60-100 mJ/cm²) for 4 weeks and its intensity increased during the period. Under the experimental conditions set in this study, the skin thickness of hairless mice significantly decreased (11.8-21.3%) compared to the control group. Based on these results, the prolonged oral intake of a collagen peptide mixture with coffee is expected to significantly increase the synthesis of procollagen in dermal fibroblasts, thereby contributing to the alleviation of wrinkling and lowered elasticity due to structural damage to the dermal layer caused by UV. The oral intake of collagen-coated coffee contributes to increasing collagen biosynthesis in a dose-dependent manner and alleviates the symptoms of thickened keratin caused by UV irradiation. However, it did not inhibit the enzymes involved in skin aging, whitening, wrinkle improvement, and antioxidation. Based on the these results, it can be concluded that the intake of collagen peptide-coated coffee extract can be utilized as an alternative material for the prevention or treatment of diseases associated with photoaging.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.83-87
• /
• 2023

전자 및 반도체 기술 분야에서는 Si를 대체할 혁신적인 반도체 소재 연구가 활발하게 진행 중이다. 그러나 대체 소재에 대한 연구는 진행 중이지만 2차원 물질을 채널로 사용하는 트랜지스터의 구성요소, 특히 기생 저항과 RF(고주파) 응용 프로그램과의 관계에 대한 연구는 매우 부족한 편이다. 본 연구는 이러한 부족한 부분을 메우기 위해 다양한 트랜지스터 구조에 중점을 두고 전기적 성능에 미치는 영향을 체계적으로 분석하였다. 연구 결과, Access 저항과 Contact 저항이 반도체 소자 성능 저하의 주요 요인 중 하나로 작용함을 확인하였으며, 특히 고도로 scaling down된 경우 그 영향이 더욱 두드러지는 것을 확인하였다. 고주파 RF 소자에 대한 수요가 계속해서 증가함에 따라 원하는 RF 성능을 달성하기 위한 소자 구조 및 구성 요소를 최적화하기 위한 가이드라인을 수립하는 것은 매우 중요하다. 본 연구는 2차원 물질을 채널로 사용하는 다음 세대 RF 트랜지스터의 설계 및 개발에 도움이 될 수 있는 구조적 가이드라인을 제공함으로써 이 목표에 기여할 수 있다.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.414-421
• /
• 2023

Infrared radiation (IR) refers to the region of the electromagnetic radiation spectrum where wavelengths range from about 700 nm to 1 mm. Any object with a temperature above absolute zero (0 K) radiates in the infrared region, and a material that transmits radiant energy in the range of 0.74 to 1.4 um is referred to as a near-infrared optical material. Germanate-based glass is attracting attention as a glass material for infrared optical lenses because of its simple manufacturing process. With the recent development of the glass molding press (GMP) process, thermal imaging cameras using oxide-based infrared lenses can be easily mass-produced, expanding their uses. To improve the mechanical and optical properties of commercial materials consisting of ternary systems, germanate-based heavy metal oxide glasses were prepared using a melt-cooling method. The fabricated samples were evaluated for thermal, structural, and optical properties using DSC, XRD, and XRF, respectively. To derive a composition with high glass stability for lens applications, ZnO and Sb₂O₃ were substituted at 0, 1, 2, 3, and 4 mol%. The glass with 1 mol% added Sb₂O₃ was confirmed to have the optimal conditions, with an optical transmittance of 80 % or more, a glass transition temperature of 660 ℃, a refractive index of 1.810, and a Vickers hardness of 558. The possibility of its application as an alternative infrared lens material to existing commercial materials capable of GMP processing was confirmed.

• Anatomy and Cell Biology
• /
• 제56권4호
• /
• pp.538-551
• /
• 2023

Exposure to environmental pollutants such as carbon tetrachloride (CCL₄) causes liver damage. This study aimed to compare the ameliorative activity of the dates flesh extract (DFE) and selenium-nanoparticles (SeNPs) on CCL₄-induced hepatotoxicity and if DFE could be a useful alternative supplement. Twenty-four male albino rats were enrolled and randomly divided into four equal groups (6 rats in each group): control group received only basal diet with no medications. Group II received CCL₄ in a dose of 0.5 mg/kg intraperitoneal injection twice weekly for four weeks. Group III rats were pretreated with SeNPs in a dose of 2.5 mg/kg once a day orally three times/wk for four weeks alone then combined with the previously described dose of CCL₄ for another four weeks. Group IV rats were pretreated with DFE in a dose of 8 ml of the aqueous extract/kg/d orally for four weeks alone then combined with the previously described dose of CCL₄ for another four weeks. The liver damage was assessed by estimation of plasma concentration of albumin and enzymes activities of alanine aminotransferase and tissue genes expression. Liver oxidation levels were assessed by measuring the tissue concentration of the malondialdehyde, superoxide dismutase, and the total glutathione. Additionally, inflammatory mediators tumour necrosis factor--α and interleukin-6 were estimated. Detecting the liver's cellular structural damage was done by histopathological and immunohistochemical examination. This study suggests that CCL₄-induced liver damage in rats can be protected by administration whether the costly SeNPs or the economical DFE.

• Structural Engineering and Mechanics
• /
• 제90권5호
• /
• pp.467-480
• /
• 2024

The mechanical properties and durability of concrete pavements may be degraded in extreme situations, resulting in the need for partial repair or total replacement. During the past few decades, there has been a growing body of research on substituting a portion of Portland cement with alternative cementitious materials for improving concrete properties. In this study, two different configurations of powdered and granulated blast furnace slag were implemented, replacing fine aggregates (by 12 wt.%) and Portland cement (by 0, 20, 40, and 60 wt.%) in the making of roller-compacted concrete (RCC) mixes. The specimens were fabricated to investigate the mechanical properties and durability specifications, involving freeze-thaw, salt-scaling, and water absorption resistance. The experimental results indicated that the optimum mechanical properties of RCC mixes could be achieved when 20-40 wt.% of powdered slag was added to concrete mixes containing slag aggregates. Accordingly, the increases in compressive, tensile, and flexural strengths were 45, 50, and 28%, in comparison to the control specimen at the age of 90 days. Also, incorporating 60 wt.% of powdered slag gave rise to the optimum mix plan in terms of freeze-thaw resistance such that a negligible strength degradation was experienced after 300 cycles. In addition, the optimal moisture content of the proposed RCC mixtures was measured to be in the range of 5 to 6.56%. Furthermore, the partial addition of granulated slag was found to be more advantageous than using entirely natural sand in the improvement of the mechanical and durability characteristics of all mixture plans.

• 만화애니메이션 연구
• /
• 통권6호
• /
• pp.152-171
• /
• 2002

This study analyses the avatar service, which is recognized as an alternative strategy of animation industry. The research questions of this study are following: (1) How have the avatar services been developed and what are the present dominant types? (2) Which structural characteristics of e-business environment are needed for the success of avatar services? (3) What is the economic characteristics of avatar business model? To solve these research questions, the basic conditions and the structural characteristics of avatar services have been investigated. In the first place, two forms of avatar service are classified. One is the internet service site whole primary service is to provide chatting service based on avatar service. The other is the portal site in which many kinds of products and services are presented as bundles to meet the needs of internet users. So avatar service is one of bundles which those portal sites are providing with. In this study, the big five internet service sites are selected based on the profits they earned through the sales of avatar service. The result of analysis is that the pricing strategy of those big five sites is very different from those of traditional off-line markets. The pricing mechanism are based on the value which internet users endow with the avatar items, not based on the costs of making the products. Avatar is the representative informative goods. The informative goods have the original cost structures, constant fixed costs and zero marginal costs, so the providers of avatar services make much of the subjective values of consumers. The sayclub, which is the most successful avatar service site and earn the average sales of 3 billing won a month, takes the aggressive strategy of pricing avatar items at highest price in the industry. The avatar service providers which make lots of profits are planning of making differentiate the services, introducing well-known brand items and star-named items. Nevertheless, the fact that the members of the sayclub are not decreasing means that the network effect of the site is so strongly manifest. Moreover, the costs the members have paid for the avatar items are so big not as to switch from one site to the other site, it can be very costly. These switching costs are endemic in high-technology industries and digital contents industries. It can be so large that switching suppliers is virtually unthinkable, a situation known as 'lock-in'. When switching costs are substantial, competition can be intense to attract new customers, since, one they are locked in, they can be a substantial source of profit. The consumers of avatar items have switching costs if they subscribe for the new avatar service site. The switching costs can be subscription costs as well as the costs of giving up the items they already paid for. One common example of switching costs involves specialized supplies, as with inkjet printer cartridges. In this example, the switching cost is the purchase of a new printer. The market is competitive ex ante, but since cartridges are incompatible, it is monopolized dx post. So the providers of printer/cartridges set pricing printer so cheap and cartridges expensive. On the contrary, since the avatar service can be successful with the strong network effect, the providers of avatar services have to compete aggressively for new customers. So they allow the subscription at a low price(almost marginal cost) in the early market. The network effect can be maximized when the members are sufficiently growing. The providers which have the monopoly power with sufficient subscribers. begin to raise the prices over the lifetime of the product and make profits.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.421-435
• /
• 2017

최근 국내 지상 구조물의 포화 및 파이프 라인 시설 과밀화 현상과 난개발로 인해 지상 구조물의 대안으로 지하 구조물에 대한 개발이 지속적으로 요구되고 있다. 도심지 인프라 구축을 위한 NATM 터널 공사에 발생하는 진동 및 소음 문제를 예방하기 위해 기계식 터널 공법인 쉴드 TBM 공법의 기계화 터널 시공이 증가하는 추세이다. 따라서 본 연구에서는 기계화 터널의 직선 시공과 급곡선 시공 시 쉴드 TBM의 구조적 안정성을 위한 쉴드 TBM 추력에 대한 중절잭, 쉴드 잭, 스킨 플레이트의 구조적 안정성 기술에 대해 연구하였다. 시공 사례 및 쉴드 TBM의 작동원리를 이론적 접근 방법으로 검토, 분석한 결과, 쉴드 TBM의 직선 및 급곡선 시공시 주요 인자에 의해 커터헤드의 회전력, 중절잭, 쉴드 잭에 대한 추력 및 커터헤드의 여굴량이 중요한 것으로 나타났다. 또한 굴진 내부 작업자의 안전 및 장비의 원활한 작동을 위해 스킨 플레이트 구조의 안정성 확보는 매우 중요 사안이므로 이번 연구를 통해 장비의 일반적인 구조 및 구성을 검토하여 직선 및 급곡선 시공 시 스킨 플레이트 구조에 미치는 주요 인자 및 구조 안정성을 실험적인 시뮬레이션 수치해석을 통해 검토하였다. 이에 직선 및 급곡선 시공 시 작용 되는 가상의 토질을 선정하여 중절잭의 하중을 비교 검토 하여 스킨 플레이트의 구조 안정성을 평가하고 형상을 최적화 하였다. 현재 국내 시공 중인 쉴드 TBM 타입의 구조 및 작동 방식이 매우 유사하므로, 추후 국산화 기술 개발 및 신규 장비 개발과 쉴드 TBM의 취약부 및 안정성을 검토하는데 기여 할 것으로 기대된다.

• 한국도로학회논문집
• /
• 제13권3호
• /
• pp.21-30
• /
• 2011

콘크리트 포장의 다웰바는 교통하중을 줄눈 넘어 인접한 슬래브로 전달하는 하중전달장치이다. 현재 국내에서 사용되는 다웰바는 원형봉강으로 교통하중과 환경하중으로 인해 반복적으로 발생하는 전단응력과 휨응력에 대해 높은 내구성을 갖고 있다. 그러나, 강재 다웰바는 장기간 공용시 줄눈틈, 포장 하부 등으로 침투한 수분으로 인해 부식이 발생한다. 특히, 겨울철에 사용되는 제설용 염수와 접촉할 경우 부식은 급격히 진행된다. 다웰바에 부식이 발생하면 부피가 증가하여 줄눈의 거동을 방해하며 유효단면적의 감소로 하중전달효과가 떨어질 수 있다. 이와 함께 지속적인 원자재 가격의 상승으로 강재 다웰바의 가격 경쟁력이 크게 낮아지고 있다. 이러한 강재 다웰바의 문제점은 새로운 재료를 사용한 대체 다웰바의 개발로 이어지고 있다. 본 연구에서는 높은 인장강도, 높은 내부식성을 갖춘 FRP(fiber reinforced plastic)를 튜브 형태로 제작하고 그 속을 고강도 무수축 모르타르로 충진한 FRP 튜브 다웰바에 대한 역학적 두께 설계를 실시하였다. 역학적 두께 설계의 기준으로 다웰바와 콘크리트 면 사이에 발생하는 지압응력을 사용하였다. 지압응력의 산정을 위하여 다웰바에 전달되는 교통하중을 이론식과 유한요소해석을 통해 산출하고 실내시험을 통해 FRP 튜브 다웰바의 물성을 측정하였다. 그 결과, 직경 32mm, 40mm FRP 튜브 다웰바 모두 지압응력 기준을 만족하는 것으로 나타났다. 국내 콘크리트 포장은 콘크리트 슬래브 하부에 강성이 큰 린 콘크리트층을 사용하기 때문에 다웰바에 전달되는 교통하중이 적고 이로 인해 지압응력도 낮아져 상대적으로 적은 직경의 FRP 튜브 다웰바의 사용이 가능한 것으로 판단된다.