• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.1
• /
• pp.103-112
• /
• 2006

Along with recent improvement of recycling technique, the quality of the recycled concrete aggregate have become very competitive to the natural concrete aggregate. Therefore, a practical use of the recycled concrete aggregate may be possible for structural members. Majority studies about the recycled concrete aggregate was emphasized a limitation of fundamental study concerned with a strength characteristics and durability of the recycled aggregate concrete, there is use for the structural members. Therefore, for the extension of application of recycled concrete aggregate, this investigation verifies the strength characteristics recycled concrete aggregate of the spun-concrete products with various coarse and fine recycled aggregate replacement ratio(coarse recycled aggregate: 0%, 20%, 40%, 60%, 100%; fine recycled aggregate: 0%, 30%, 60%, 100%) and with addition of cellulose fibers(0%, 0.01%, 0.03%, 0.05%, 0.08%). From the test results, The strength of spun concrete used with recycled aggregate [NR specimen], was measured as 72MPa, was found to be very approximately to the strength of spun concrete used with the natural aggregate(NN specimen), was measured as 74MPa, when only fine aggregate was replaced with the recycled. Therefore, the fine recycled concrete aggregate can be successfully used in the spun high strength concrete product. The compressive strength of all specimens used the specialty cellulose fiber were measured as about 70M Pa, however, the increasement of the specialty cellulose fiber content is showed to decrease compressive strength of spun concrete. Therefore, it is anticipated that the specialty cellulose fiber can be applied to the various spun concrete products.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.133-146
• /
• 2012

University dining services have received less attention than commercial food services or other institutional food services. Marketing practitioners and researchers recognize the major impact that perceived value has on consumer behavior. The mediating role of value has not been verified in relation to satisfaction in university dining establishments, including Korea. This study intends to investigate the relationships among value, satisfaction and revisit intention of university dining attributes. This study also examines whether university dining service attributes dimensions influence value. Further, this study verifies the role of value as a mediator in the formation of customer satisfaction and revisit intention. Structural Equation Modeling has been applied to the collected data from students of three universities in Korea. The study resulted in that university dining attributes, such as food, menu and convenience, positively affected value of the university dining services. Further analysis with examination of indirect effects confirmed the positive impact of value on satisfaction in university dining services. This study verified the mediating role of value on satisfaction as student's satisfaction is enhanced through the elevation of value of university food services. Enhanced satisfaction via value also led to improvement in revisit intention. This study contributes to the academia by verifying the mediating role of value in the formation of customer satisfaction in a university dining context. This study also offers practical implications to the industry, such as suggestions on developing strategies for value-added products and services to the university dining establishments. This value research for university dining services is also meaningful by triggering future research on market segmentation, product differentiation and positioning policies. In the long run, improving value and satisfaction with university dining services need to be realized to enhance overall college experiences and other competitive advantages, such as student recruitment and enrollment, student academic evaluations, and university reputation.

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.105-130
• /
• 2007

Recently, there is a substantial interest in implementing Business Process Management System(BPMS) among enterprises with the purpose of business process innovation. BPMS redesigns and coordinates business processes in terms of both automated steps and human involvement in order to maximize the value of both involved people and systems. The reason why BPMS is getting attention from top managers is that it has the possibility to optimize the business processes by cycling the process of modeling, execution, monitoring, evaluation, and redesigning work processes. Thus, it has created high expectations about not only productivity improvement but also business process innovation. However. having an innovative nature, which is used for process innovation, BPMS implementation has great potential to stir up employee resistance. The analysis and the discussion about the prevention of the resistance against IS(Information Systems) is important because IS change the way people work and also alter the power structure within the organization, in general. The purpose of this study is to investigate factors that have an impact on the effective adoption of BPMS at the enterprise level. To find out these factors, this study considers two characteristics of BPMS: First. BPMS shares some characteristics with other enterprise-wide IS such as ERP. Second, it has special BPMS-specific characteristics. Due to the lack of previous research on BPMS adoption, interviews were carried out with IT-consultants and CIOs who conducted BPMS projects previously to find out BPMS-specific features that would make BPMS unique when compared to other enterprise-wide IS. As a result, the monitoring function was chosen as the main BPMS-specific factor. Thus, this paper reviewed studies both on enterprise-wide IS adoptions, which applied Technology Acceptance Model (TAM) and secondly on computer based monitoring to find out factors that would influence the employees' perception on the monitoring function of BPMS. Based on the literature review, the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses, out factors that would impact the employees' perception on the monitoring function of BPMS. Based on the literature review the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses. The data analysis results showed that two among three monitoring function related factors - enterprise evaluation system and fairness of the boss - were significant. This implies that employees would worry less about the BPMS implementation as long as they perceive the monitoring results will be used fairly for their performance evaluation. However, employees' high self-efficacy on their job was not a significant factor in their perception of the usefulness of BPMS. This is related to cases that showed employees resisted against the information systems because they automated their works (Markus, 1983). One specific case was an electronic company, where the accounting department workers were requested to redefine their job because their working processes were automated due to BPMS implementation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.1
• /
• pp.95-112
• /
• 2020

This paper is to investigate how cognitive bias of college students and entrepreneurs relates to perceived risks and entrepreneurial opportunities that represent uncertainty, and how various cognitive bias and entrepreneurial efficacy In the same way. The purpose of this study is to find improvement points of entrepreneurship education for college students and to suggest problems and improvement possibilities in the decision making process of current entrepreneurs. This empirical study is a necessary to improve the decision-making of individuals who want to start a business at the time when various attempts are made to activate the start-up business and increase the sustainability of the existing SME management. And understanding of the difference in opportunity evaluation, and suggests that it is necessary to provide good opportunities together with the upbringing of entrepreneurs. In order to achieve the purpose of the study, questionnaires were conducted for college students and entrepreneurs. A total of 363 questionnaire data were obtained and demonstrated through structural equation modeling. This study confirms that there is some relationship between perceived risk and cognitive bias. Overconfidence and control illusions among cognitive bias have a significant relationship between perceived risk and wealth. Especially, it is confirmed that control illusion of college students has a significant relationship with perceived risk. Second, cognitive bias demonstrated some significant relationship with opportunity evaluation. Although we did not find evidence that excess self-confidence is related to opportunity evaluation, we have verified that control illusions and current status bias are related to opportunity evaluation. Control illusions were significant in both college students and entrepreneurs. Third, perceived risk has a negative relationship with opportunity evaluation. All students, regardless of whether they are college students or entrepreneurs, judge opportunities positively if they perceive low risk. Fourth, it can be seen from the college students 'group that entrepreneurial efficacy has a moderating effect between perceived risk and opportunity evaluation, but no significant results were found in the entrepreneurs' group. Fifth, the college students and entrepreneurs have different cognitive bias, and they have proved that there is a different relationship between entrepreneurial opportunity evaluation and perceived risk. On the whole, there are various cognitive biases that are caused by time pressure or stress on college students and entrepreneurs who have to make judgments in uncertain opportunities, and in this respect, they can improve their judgment in the future. At the same time, university students can have a positive view of new opportunities based on high entrepreneurial efficacy, but if they fully understand the intrinsic risks of entrepreneurship through entrepreneurial education and fully understand the cognitive bias present in direct entrepreneurial experience, You will get a better opportunity assessment. This study has limitations in that it is based on the fact that university students and entrepreneurs are integrated, and that the survey respondents are selected by the limited random sampling method. It is necessary to conduct more systematic research based on more faithful data in the absence of the accumulation of entrepreneurial research data. Second, the translation tools used in the previous studies were translated and the meaning of the measurement tools might not be conveyed due to language differences. Therefore, it is necessary to construct a more precise scale for the accuracy of the study. Finally, complementary research should be done to identify what competitive opportunities are and what opportunities are appropriate for entrepreneurs.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.80-85
• /
• 2017

Purpose The D530c have cadmium zinc telluride(CZT) detectors that are arranged focus on the heart. This structural characteristic allows for quicker imaging without rotation, but this is sensitive to patient movement and can affect the test results. The aim of this study is to optimize the image quality by reducing patient movement during the examination. Materials and Methods We analyzed the patients' movements, and performed various activities such as provided patient education about correct breathing techniques and avoiding patient movements, and created breathing correction tools to minimize patient movement during exam. The 70 patients who underwent myocardial perfusion SPECT with D530c in November 2016 were categorized as the group before the corrective steps. Another 70 patients who underwent the procedure with D530c from February 14, 2017 to February 21, 2017 were categorized as the improvement group. Images acquired during stress and at rest were compared and analyzed by measuring the durations of heart movements over certain distances (4 mm, 8 mm, 12 mm, or more) noted on the x-, y-, and zaxes. Results After the activities, the durations of heart movements decreased in the images acquired both under stress and at rest. In particular, there were no large motions greater than 12 mm recorded in the stress images after the improvement. There was a significant difference (p<0.005) in the 4-mm and 8-mm fluctuations on the X-axis and the 8-mm fluctuations on the Z axis in the stress images, but there was no significant difference (p>0.005) in the other stress and rest intervals. Conclusion The decrease in the time of motion occurrence due to the 4 mm fluctuation distance that can occur through breathing can be understood as a result of the breathing being corrected through training and motion prevention tools. It is expected that the image quality will be improved by reducing the occurrence time according to the variation distance of 8 mm or 12 mm, which is expected as the actual movement of the patient other than the breathing.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.446-455
• /
• 2015

Based on comparative studies on standards and grading procedures of machine graded lumber in Korea and other countries, this study proposed a procedure of determining the grade classification and design strengths of domestic machine graded lumber. Differences between machine stress rated lumber and E-rated laminations were detailed in order to clarify the need for the procedure improvement. To this improvement the use of average MOE requirement for grading was introduced instead of the fixed minimum MOE requirement which is currently used in the Korean standards. It was found that the fixed minimum MOE requirement method was easier for an inspector to grade but, less efficient as a strength predictor than the average MOE requirement method. The advantage of average MOE requirement method is statistically MOR-MOE regression-based MOR prediction and highly efficient in quality control though it requires a computer-aided operation system in an initial setup. A major weakness of the current Korean grading system was found that different strength characteristics depending on wood species were not reflected on the grade classification and the tabulated allowable design stress. The proposed procedures were developed taking advantages of respective merits of both methods and based on MOR-MOE regression analysis. Through this procedure, the grades of machine stress rated lumber should be revised to become interchangeable with E-rated lamination, which would be beneficial to the cost competitiveness of domestic machine graded lumber and glued laminated timber industry.

• Korea journal of population studies
• /
• v.15 no.2
• /
• pp.15-59
• /
• 1992

After world war II Japanese life expectancy has been improved remarkably, and reached the highest level in the world around late 1970's. The life expectancy of Korean has also shown tremendous improvement in recent years with about 20 year's gap from the Japanese. The reason of rapid improvement of life expectancy can be explained by changes in the structure of cause of death due to health system, living standard, social welfare, health behavior of individuals and so on. Korean in Japan is placed under different situations from both Korean in Korea and Japanese in these regards, and expected to show different picture of cause of death pattern. The objective of this study is the comparision of changing patterns of cause of death of three population groups, Korean in Japan, Korean in Korea and Japanese, and to investigate the reasons which effect to the structural difference of mortality cause with special emphasis on health ecological aspects. One of the major limitations of the Korean causes of death statistics is the under-registration which ranges about 10% of the total events, and inaccuracy of the exact cause of death. Some 20% of registered deaths were unable to classify by ICD. However, it is concluded that the Korean data are evaluated as sufficient to stand for over-viewing of trends of cause of death pattern. The evaluation is done by comparing data from registration and field survey over the same population sample. Population data of Korean in Japan differ between two sources of data; census and foreigner's registration. Correction is done by life table method under the assumption that age-specific mortality pattern would accord with that of the Japanese. The crude death rate was lowest among Korean in Japan, 5.7 deaths per 1,000 population in 1965. The crude death rates of Korean in Japan and Japanese are increasing recently influenced by age structure while Korean in Korea still shows decreasing tendency. The adjusted death rate is lowest among Japanese, followed by Korean in Japan, and Korean in Korea. The leading causes of death of Korean in Korea until 1960's was infectious diseases including pneumonia and tuberculosis. The causes of death structure changed gradually to accidents, neoplasm, hypertensive disease, cerebro-vascular disease in order. The main difference in cause of death between Korean and Japanese if high rate of liver diseases and diabetes for both Korean in Japan and Korea. A special feature of cause of death among Korean in Korea is remakably high rate of hypertensive disease, which is assumed to be caused by physicians tendency in choosing diagnostic categories. The low ischemic heart disease and high vasculo-cerebral disease are the distinctive characteristic of the three population groups compared to western countries. Specific causes of death were selected for detailed sex, age and ethnic group comparisons based on their high death rates. Cancer is the cause of death which showed most dramatical increase in all three population groups. In Korea 20.1% of all death were caused by cancer in 1990 compared with 10.5% in 1981. Cancer of the liver is the leading cause of cancer death among Korean in Japan for both sexes, followed by cancer of the lung and cancer of the stomach, while that of Korean in Korea is cancer of the stomach, followed by cancer of the liver and cancer of the lung for male. Causes of infant mortality were examined among the three population groups since 1980 on yearly bases. For both Japanese and Korean in Japan, leading cause of death ranks as conditions originating in the perinatal period, congenital anomalies, accidents and other violent causes. Trends since 1980 for these two population groups in the leading cause of infant mortality showed no changes. On the contrary, significant changes in leading cause of death structure in Korea were observed : the ranking of leading cause of death in 1981 were congenital asnomalies, pneumonia bronchitis, infectious disease, heart disease, conditions originating in the perinatal period, accident and other violent causes ; in 1990 the ranking shifted to congenital anomalies, accident, pneumonia bronchities, conditions originating in the perinatal period, infectious disease. The mortality rate by congenital anomalies in Korea continuously grew than any other causes. Larger increase ocurred during the 1990's

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.431-440
• /
• 2014

To propose the improvement and management plans to strengthen the pollutant removal efficiency of dam reservoir's constructed wetlands(CWs), the operation status and configuration of CWs (including water depth, operational flow, water flow distribution, residence time, and pollutant removal efficiency, aspect ratio, open water/vegetation ratio etc.) were analyzed in 10 major wetlands constructed in dam reservoirs. The pollutant concentrations in the inflows of the studied CWs were lower than those of American and European constructed wetlands. Especially, organic matter concentrations in all of inflows were below 3 mg/L(as BOD) due to advanced treatment of sewage disposal plant and an intake of low concentration water during dry and normal seasons. The average removal efficiency of total nitrogen(TN) and total phosphorus(TP) for 10 CWs ranged from 7.6~67.6%(mean 24.9%) and -4.9~74.5%(mean 23.7%), respectively, showing high in wetlands treating municipal wastewater. On the other hand, the removal efficiency of BOD was generally low or negative with ranging from -133.3 to 41.7%. From the analysis of the operation status and configuration of CWs, it is suggested that the low removal efficiency of dam reservoir's CWs were caused by both structural (inappropriate aspect ratio, excessive open water area) and operational (neglecting water-level management, lack of facilities and operation for first flush treatment, lake of monitoring during rainy events) problems. Therefore, to enable to play a role as a reduction facility of non-point source(NPS) pollutants, an appropriate design and operation manuals for dam reservoir's CW is urgently needed. In addition, the monitoring during rainy events, when NPS runoff occur, must be included in operation manual of CW, and then the data obtained from the monitoring is considered in estimation of the pollutant removal efficiency by dam reservoir's CW.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• 한국노년학
• /
• v.36 no.3
• /
• pp.905-926
• /
• 2016

Although the concept of the elderly varies depending on scholars and laws, as consumption expenditure is deeply associated with income due to the nature of this study, 55 years old was set as the low limit standard for the elderly according to Prohibition of Discrimination on Age in Employment and Employment Promotion for the Aged Act and the elderly households were limited to single-elderly person household and an elderly couple family household for this study. It is considered consumption characteristics as a significant analysis subject in terms of social welfare because it could be understood as an expressed need which was a reflection of desire. Therefore, the present study aimed to investigate the consumption characteristics of the elderly households by stereotyping the consumption pattern of the elderly households, and find the determining factors for consumption patterns and thus contribute to the establishment of related policies through the expressed needs of the elderly households. K-means of cluster analysis was performed by putting the consumption expenditure of the elderly households to investigate inherent structural type of consumption pattern of the elderly households, which were the investigation subjects. As a result, four groups were stereotyped and named as below: 'health care-centered type', 'saving-centered type', 'livelihood-centered type', and 'food expenses-centered type' Binary Logistic Regression analysis was used to identify the factors that influence the decision of consumption pattern of the elderly households. The result of study showed that the elderly households faced all different needs and problems and thus there is a need for various approach plans to solve this situation. In particular, although the elderly have been viewed as economically poor people so far, the study showed that there were also kind of prepared households through saving. Overall, livelihoodcentered type accounted for the highest portion and, as a factor that influenced this, marital state and household income played an important role. Therefore, it is considered that more active efforts to increase the income of the elderly households are needed. In addition, age, owning of house and subjective health state were found to also have significant influence. Through these results of the study, the elderly's own improvement of awareness on health, presentation of overall standard for health state of the elderly, securement of the elderly's access to cultural life, and financial management coordination for improvement of quality of life, development and dissemination of jobs suitable for the elderly, and dissemination of communal life household, which is a cooperation residential type, were presented as institutional task in the conclusion.