• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.131-140
• /
• 2005

Responses of the cabinet of the reactor safety system under seismic leadings are analyzed, its dynamic characteristics and structural reliability being evaluated. Analyzed natural frequencies are compared with those measured from a resonance test. Structural safety of the cabinet is evaluated in consideration of the required response spectrums of the operation-base and safe-shutdown earthquakes. Transient responses of the cabinet are analyzed with input ground acceleration measured during the seismic test, accelerations being extracted at the locations of the main internal parts. The transient responses are compared with those from the seismic test, favorable results being shown.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.105-111
• /
• 2003

The three-axis road simulator is the test equipment which can simulate the standardized road conditions for the durability evaluation of automotive components such as suspensions. The road load data are collected and acquired from a vehicle test, and then these data are used to simulate road load conditions by the road simulator which consists of hydraulic actuators, link mechanism and servo controller. The link mechanism must be designed in consideration of the dynamic effect and interference during three axes motions in order to generate accurate motions. In this paper, the structural and kinematic analysis of the link mechanism is performed, and these results can be used for developing the three-axis road simulator. The three-axis road simulator provides considerable savings in cost, development time, and testing risk during developing automotive components.

• 한국수소및신에너지학회논문집
• /
• 제33권3호
• /
• pp.240-246
• /
• 2022

This study was conducted to develop a domestic product for a flow control valve for a hydrogen refueling station, and a domestic prototype was manufactured and the durability performance evaluation was conducted through comparison with an imported products. The stress generated by the internal pressure was checked and safety was confirmed using a commercial structural analysis program, ABAQUS, in accordance with the withstand pressure test standards. In addition, after identifying the weak areas the fatigue life was predicted through a commercial software, fe-safe. This fatigue analysis showed that the hydrogen gas repeated test criteria were satisfied.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.566-572
• /
• 2005

This paper describes the results of structural analysis and loading test of a bogie frame. The purpose of the analysis and test is to evaluate the safety and functionality of the bogie frame under maximum load. The bogie system consist of the bogie frame, suspensions, wheel-sets, a brake system and a transmission system. Of these components, the bogie frame is the major components subjected to the vehicle and passenger loads. The evaluation method used the JIS E 4207 specifications throughout the FEM analysis and static load test. The test results have shown the bogie frame to be safe and stable under design load conditions.

• 비파괴검사학회지
• /
• 제29권3호
• /
• pp.230-234
• /
• 2009

As concrete ages, the surrounding environment is expected to have growing influences on the concrete. As all the impacts of the environment cannot be considered in the strength-estimating model of a nondestructive concrete test, the increase in concrete age leads to growing uncertainty in the strength-estimating model. Therefore, the variation of the model error increases. It is necessary to include those impacts in the probability model of concrete strength attained from the nondestructive tests so as to build a more accurate reliability model for structural performance evaluation. This paper reviews and categorizes the existing strength-estimating statistical models of nondestructive concrete test, and suggests a new form of the strength-estimating statistical models to properly reflect the model uncertainty due to aging of the concrete. This new form of the statistical models will lay foundation for more accurate structural performance evaluation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권1호
• /
• pp.139-145
• /
• 2000

In this experimental program specimens. designed by the test variables, such as percentage of steel fiber incorporated, were constructed and tested to evaluate the flexural performance of reinforced steel fiber concrete beams. Based on the test results reported in this study, the following conclusions are made. Comparing with the load-displacement relationship of standard specimen, specimen over 0.5% of steel fiber incorporated, could be improved significantly flexural performance, such as capacity, ductility, and crack pattern. As increasing in quantity of steel fiber incorporated(0.5%~2.0%), the flexural strength of each specimen was shown the enhancement of 13%~40% in comparision with the standard specimen BSS.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.49-54
• /
• 2000

Cr-Mo-V steel is widely used as a material for the turbine structural component in fossil power plants. It is well known that this material shows the various material degradation phenomenons such as temper embrittlement, carbide coarsening. and softening etc. or ins to the severe operation conditions as high temperature and high pressure. These deteriorative factors cause tile change of mechanical properties as reduction of fracture toughness. Therefor it is necessary to evaluate tile extent of degradation damage for Cr-Mo-V steel in life assessment of turbine structural components. In this paper. the electrochemical potentiokinetic reactivation(EPR) test in $50wt%-Ca(NO_3)_2$ solution is performed to develop the newly technique for degradation damage evaluation of Cr-Mo-V steel. The results obtained from the EPR test are compared with those in small punch(SP) tests recommended by semi-nondestructive testing method using miniaturized specimen. The evaluation parameters used in EPR test are tile reactivation current density$(I_R)$ and charge$(Q_{RC})$ reactivation rate$(I_R/I_{Crit},\;Q_R/Q_{Crit})$. The results suggest that $I_R/I_{Crit}$ in these parameters shows a good correlation with SP test results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.993-996
• /
• 2008

현재 건설현장에서 구조체 콘크리트 강도는 구조체에서 채취한 코어공시체 강도가 가장 신뢰성이 높다고 알려져 있다. 그러나 코어 채취시 구조체의 손상이나 배근의 절단에 의해서 구조체 성능의 지장을 줄 우려가 있고 공시체 채취후의 보수 등에 몇 가지 문제가 있다. 또한 비파괴 검사에 의한 경우 결과값을 추정하는 방법이기 때문에 신뢰도가 매우 저하되는 단점을 가지고 있다. 본 연구 개발의 목표는 접합 분리 시험체 및 콘크리트의 코어채취에 의한 직접적인 강도 측정방법과 계절별 관리용 공시체 강도를 비교분석하여 보다 발전된 구조체 콘크리트의 성능 평가방법을 제시하여 합리적이고 실용적인 구조체 콘크리트의 시공 품질관리 기법을 제안 하는데 목적이 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.78-86
• /
• 2014

본 연구의 목적은 I형 스트럿 및 S형 스트럿 강재댐퍼의 변위 및 속도의존성을 평가하는 것이다. 이를 위하여 12개의 강재댐퍼를 제작하여 의존성 평가를 실시하였으며, 시험 변수는 스트럿 형상, 목표 변위 및 속도이다. 의존성 시험에 의한 반복횟수 평가결과, ASCE 7-10에서 규정한 최소 반복횟수 5회를 충분히 상회하는 것으로 평가되었다. 변위의존성 평가결과, 큰 목표변위 (50mm)의 반복횟수 및 누적에너지소산능력은 적은 목표변위 (25mm)에 비하여 감소하였다. 또한 짧은 목표변위보다 큰 항복강도 및 조기파단을 나타내었다. 속도의존성 평가에서는 빠른 목표속도 (60mm/sec)의 반복횟수 및 누적에너지소산능력이 느린 목표속도 (40mm/sec)에 비하여 감소하였다. 결과적으로 강재댐퍼의 기본 물성, 의존성 평가, 누적에너지소산능력 평가결과, S형 스트럿을 가지는 강재댐퍼의 의존 능력이 I형보다 윌등히 우수한 것으로 평가되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.139-146
• /
• 2014

최근 구조물의 노후화에 따른 급속 교체, 교통 영향 및 환경 영향 최소화의 요구에 따라 프리캐스트 기술을 활용한 모듈러 교량 연구가 활발하게 진행중에 있다. 본 연구는 모듈러 교량과 관련된 연구의 일환으로 모듈러 슬래브 교량의 횡방향 연결부를 대상으로 반복하중 재하 실험을 통하여 횡방향 연결부의 반복 하중에 따른 구조적 거동 특성을 파악하고 사용성 평가하였다. 반복하중의 크기를 결정하기 위하여 RC 보를 1개 제작하였으며 반복하중 재하 실험을 위하여 일체형 RC 보 1개와 분절형 실험체 3개를 제작하였다. 실험결과, 분절형 실험체는 하중 반복 횟수가 증가함에 따라 처짐 및 균열폭이 거의 일정하거나 수렴하는 경향을 나타냈으며, 일체형 RC 보와 비교하여 최대 처짐, 잔류처짐, 균열폭 모두 작게 나타났다. 또한 사용하중을 반복 재하한 실험체의 경우, 처짐 및 균열에 대한 사용성 기준을 모두 만족하였다.