• Journal of the Semiconductor & Display Technology
• /
• v.19 no.2
• /
• pp.68-71
• /
• 2020

In this study, SiNx and Al₂O₃ thin film was manufactured using PECVD deposition process and applied to crystalline silicon solar cells, resulting in 16.7% conversion efficiency. The structural improvement experiment of the rear electrode resulted in a 1.7% improvement in conversion efficiency compared to the reference cell by reducing the recombination rate of minority carriers and increasing the carrier lifetime by forming a passivation layer consisting of SiNx and Al₂O₃ thin films through the PECVD process.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2000

The selective catalytic reduction(SCR) of nitric oxide by ethane in the presence of oxygen was investigated on Cu-ZSM-5, Co-ZSM-5 and Ga-ZSM-5 catalysts over a range of 400, 450 and $500^{\circ}C$. The catalysts were prepared by ion-exchange method. The composition of the reactant gases were 1000 ppm of NO, 1000 ppm of $C_{2}H_{6}$ and 2.5% of $O_{2}$, and the reaction was conducted in a fixed-bed reactor at 1 atm. For the 20wt% Co-ZSM-5(50) catalyst, the NO conversion reached up to 100%, while the $C_2H_6$ conversion and the CO selectivity were about 50% and 25%, respectively, at $450^{\circ}C$. For the 20wt% Cu-ZSM-5(50) catalyst, the NO conversion and the C2H6 conversion were about 80% and 100%, respectively, but there was no CO produced. The metal ion-exchanged ZSM-5 catalysts exhibited a tendency to increase the NO conversion with the Si/Al ratio of the ZSM-5, that is, NO conversion was inversely proportional to the acidity of the catalysts. But, the effect of the acidity on NO conversion was not so large. From the XRD results of the catalysts before and after SCR reaction it was found that there was no structural change.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.32-39
• /
• 2011

When the laws about the security of ships are revised, or voyage conditions are changed, ship owners have converted rather than built new passenger ships including cruise ships recently. As conversion causes a lot of changes in principal dimension, structural strength, hydrodynamic performance, the number of passengers, and cargo capacity, detailed pre-review is needed. But any studies on conversion have not been carried out yet, this study investigated and analyzed the trend of consulting companies' reports (Delta Marine Report, 2005, 2008). As a result, it was found that lengthening conversion brought about the main changes in principal dimension, and performance. Also it was suggested that there be factors for consideration like hull scantling, hull form, and cutting point to minimize side effects when ship owners build ships having lengthening conversion in mind.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.6
• /
• pp.7-15
• /
• 2002

In this paper, the nonlinear parameter estimation method using the estimated hysteresis of each structural members was studied for the purpose of efficient seismic damage prediction and estimation of MDOF nonlinear structural model in the shaking table test. The hysteresis of each structural members can be obtained by the conversion of measured response histories into relative motions of each structural members and member forces. These hysteresis can be used to evaluate various kinds of damage indices of each structural members. The MDOF nonlinear structural model for further analysis(re-analysis) can be easily reconstructed using estimated nonlinear structural parameters of each structural members. To demonstrate the proposed techniques, several numerical and experimental example analyses are carried out. The results indicate that the proposed method can be very useful to assess local seismic damages of structures.

• Corrosion Science and Technology
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2018

As structural materials, magnesium (Mg) alloys have been widely used in the fields of aviation, automobiles, optical instruments, and electronic products. There are few studies on the effect of coating conditions on the compositional variation during the formation process of the conversion coatings. Rare-earth based conversion coating on AZ91 magnesium alloy was prepared in ceric sulfate and hydrogen peroxide contained solution. The element composition and valence as well as their distribution in the coating were analyzed with energy dispersive X-ray spectroscopy (EDS), Electron probe micro-analyzer (EPMA), X-ray photoelectron spectroscopy (XPS). The effect of treating process on the element composition were also studied. It was found that the conversion coating surface consists of Mg, Al, O, Ce, and the weight content of Ce in the coating was affected by the treating solution concentration and immersion time; the Ce element was distributed in the coating non-uniformly and existed in the form of $Ce^{+3}$ and $Ce^{+4}$, while the O element existed in the form of $OH^-$, $O^{2-}$, $H_2O$. Based on microscopic analysis results, the electrochemical deposition mechanism on the micro-anode and micro-cathode in the process of the coating growth was suggested.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.349-352
• /
• 2007

A GFRP based composite blade was developed for a 2MW wind energy conversion system of type class IIA. The blade sectional geometry was designed to have a general shell-spar and shear web structure. The load cases specified in the IEC61400-1 international specification were considered. For withstanding all relevant extreme loads, the structural analysis for the complete blade was performed using a commercial FEM code. The static load carrying capacity, blade tip deflection and natural frequencies were evaluated to satisfy the strength and stability requirements in accordance with the IEC61400-1 and GL Regulations. The prototype blade was passed the structural proof test for GL certification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.500-503
• /
• 2003

XML been using extensively by standard of data exchanging in the Internet is observed by a technology to replace existent document creation language of HTML etc. Biggest characteristic of this XML is that logic information and physical information that express style of document that do that express structural substance of document were detached. Hereupon, W3C advised XSL that oner style function of form similar to HTML for XML's style and data conversion. Also, XSL's conversion function offers function that change XML document to other data format, and can describe style information through conversion of various document format. But, a XML document conversion technology that use XSLT know-how in domestic is unprepared real condition, and necessity about solution that can edit XSLT document efficiently is putting. This paper does XML document so that conversion and output are available in various document format. And offered research of XSLT document editing system that can edit and create XSLT document efficiently under WYSIWYG environment.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.51-59
• /
• 2013

This study aimed to present the possibilities that a variety of conversions can be made in terms of the spatial function through the situation analysis and in-depth case studies, focusing on the cases of the conversion of historic buildings. Literature analysis and case analysis technique were conducted as the research methods. For the literature analysis, the researcher selected 105 cases of conversion-type buildings by recombining and reanalyzing them to space functional changes; the SPSS PC+ 18.0 program was used as the analysis tool to conduct a frequency analysis and cross analysis. In-depth analysis was conducted to investigate the overview of the architecture, building history, spatial functional changes, space program, conservation value, and the conserved parts by selecting 9 cases in Korean and foreign countries that have been recently converted through literature analysis and the results of the study were as follows. 1) As a result of analyzing the changes in function, the highest percentage of the cases was conversion into the cultural function (63.8%). 2) There were cases for conversion into the commercial function, business function, accommodation function and educational function besides cultural function. 3) As a result of spatial program, the attempts to increase the utilization of the building generally by applying the complex space with more than two functions could be seen. 4) The buildings with historical and architectural value were conserved most of the outer wall and some portion of internal parts; the buildings with symbolic value were renovated largely, while preserving symbolic parts; and the buildings with practical value were renovated in a way that maintains the structural parts while changing the interior space to be suitable for their function.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.4
• /
• pp.376-386
• /
• 2013

This paper proposes an improved Maximum Power Point Tracking method and design methods of unmanned solar vehicle system by parts of hardware, unmanned driving control and power conversion. The hardware design is offered on the weight reduction and structural reliability by using structural analysis software. The technique of curve fitting is applied to unmanned control system due to minimizing the vehicle's behavior. Furthermore, lateral controller applying actuator dynamics is robust enough to prevent performance degradation by measurement noise regarding position and heading angle. The power conversion system contains battery charger system and tapped-inductor boost converter. In the battery charger system, variable step-size MPPT is conducted for quick response of maximum power point tracking. The validity of the proposed algorithm are verified by simulations and experiments.

• Journal of the Korean Society of Costume
• /
• v.58 no.1
• /
• pp.116-132
• /
• 2008

Continuity and discontinuity is a relative concept, and there are various categories of the continuity and discontinuity in our circumference. In the thought of postmodernism of the late of 20th Century, continuous creations of the difference and the repetition have being regarded as a discontinuity. But, because of that catches the moment occurring qualitative skip though the flowing of the everlasting time, this has been known to a shortsighted viewpoint overlooking characteristic of the qualitative continuity of an organism, which have being created continuous formation for life through the flowing of the time. Therefore, this had studied like this complex social condition and various relationships expressed in modern fashion focusing on permanently creative movements and behaviors equal to the qualitative continuity. This Thesis is following study about continuity, and aims at understanding of those formative characteristics through consideration about characteristics of qualitative continuity. And, this analyzes formative characteristics of the qualitative continuity into 5 sets: enlargement, conversion, structural variability, mutual combination, and deconstruction. This thesis intends to grasp complex modern social phenomenon and modern fashion into qualitative continuity that means continuous formation and the change of various relationships according to recognition about the course toward open thinking.