• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.137-140
• /
• 2003

대부분의 기존 임베디드 웹 서버 시스템은 어떤 특정 기기를 제어하기 위하여 고안되고 있다. 본 논문에서는 StrongArm 계열의 SA1110 chip을 채택하여 H/W 보드를 설계하고 최적의 웹 서버를 만들었다. 최근 널리 사용되고 있는 SA1110 H/W 보드 설계 중 Ethernet Controller인 CS8900A 설계에 관한 세부 사항들과 Ethernet 관련 Kernel patch에 대한 내용을 다루었다. 그리고 CS8900A에 대한 Network device driver 모듈에 대하여 자세히 언급하며, 제작된 보드를 사용하여 웹 서버 프로그램을 작성하여 MS 익스플로러 6.0환경에서 실험하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 추계학술발표논문집 (상)
• /
• pp.501-504
• /
• 2002

실시간 제어 시스템은 그 특수성에 의해 개발자에게 상당한 제약이 있었다. 본 논문에서는 실시간 운영체제 중에서 Linux 를 기반으로 한 RTLinux 를 사용하였다. RTLinux를 StrongARM SA-1110 CPU가 탑재된 영상처리 보드에 올리는 과정을 기술하고, RTLinux의 module 이라는 작업 형태를 이용하여 로봇의 카메라에서 획득한 영상을 실시간으로 전송하도록 구현하였다. 또한, 사용자의 입력을 감시하는 부분을 실시간 모듈로 구현하여 제한된 시간 안에 원하는 결과를 산출하도록 구현하였다.

• 천문학회보
• /
• 제44권2호
• /
• pp.50.3-50.3
• /
• 2019

We show that dynamical evolution in a strong (Galactic Centre-like) tidal field can create clusters that would appear to have very top-heavy IMFs. The tidal disruption of single star forming events can leave several bound 'clusters' spread along 20~pc of the orbit within 1-2 Myr. These surviving (sub)clusters tend to contain an over-abundance of massive stars, with low-mass stars tending to be spread along the whole 'tidal arm'. Therefore observing a cluster in a strong tidal field with a top-heavy IMF does not mean the stars formed with a top-heavy IMF.

• 한국직업건강간호학회지
• /
• 제15권1호
• /
• pp.14-29
• /
• 2006

Purpose: The purposes of this study were to survey the extent of pain and discomfort in the musculoskeletal system among visiting housekeepers, above all concerning neck, shoulder, back, wrist, knee, and arm pain and to find possible relations between symptoms and various working conditions. Method: A questionnaire was answered by 174 woman visiting housekeepers living in Kyeonggi-do and Seoul from December 1, 2003 to February 30, 2004. The symptoms of musculoskeletal system were coded by the pain index which illustrates the extent of the symptoms, and analyzed in view of NIOSH guideline and Kim, et. al.'s notion. Result: 1. As to the complaint rate of subjective musculoskeletal symptoms by body region, the figure was the highest for shoulder with 78.2%, followed by back with 66.7%, knee 53.6%, neck 56.3%, wrist 40.2%, and arm 29.2%, respectively. The logistic analysis showed shoulder pain and arm pain have no relation with working and health conditions, and back pain was significantly related to current health condition. In same way, knee pain and wrist pain were found to be mainly related to marital status. 2. Following the NIOSH guideline, the positive rate of subjective musculoskeletal symptoms was found out in following order: shoulder 69.5%, back 59.2%, knee 54%, neck 46%, wrist 32.8%, and arm 25.3%. To investigate the main cause of each disease, the symptoms were classified by pain index, where the value of more than 3 comes to the NIOSH case, and analyzed in term of complaint rate using discrete logistical method : shoulder pain was highly related to the housekeeping time after work, back pain was to current health condition and the heavy weight carrying and neck, wrist, arm pain were commonly related to the ordinary health condition. For knee pain, working speed was a main cause. 3. In view of Kim et. al.'s standard, where the pain index is over 7, the positive rate was showed in order slightly different from previous analyses : shoulder 33.3%. knee 29.9%, back 28.2%, neck 17.2%, wrist 17.2%, and 16.7%. From the logistical analysis, insufficient rest was shown as the main cause of shoulder, back, arm and wrist pain. For neck pain, ordinary health condition was mainly related. In case of knee pain, any apparent relation is not found. Conclusion: According to the logistic regression analysis of musculoskeletal system, there was strong suggestion that the less insufficient physical rest, the more significant disorder complaint. This means that the most musculoskeletal symptom among the visiting housekeepers can be prevented and cured by sufficient physical resting.

• 융합정보논문지
• /
• 제11권9호
• /
• pp.124-129
• /
• 2021

본 연구는 시간-보간법을 적용한 FLASH analog-to-digital converter (ADC)에 관한 것이다. 시간-보간법은 기존의 FLASH ADC에서 요구되는 전압영역 비교기의 개수를 줄일 수 있으며 이 따른 전력 소모 및 칩 면적의 절약을 기대할 수 있다. 본 연구에서는 5-bit, 즉 31개의 양자화 레벨을 갖는 ADC를 설계 및 구현하였으며, 16개의 양자화 레벨은 기존의 전압영역 비교기 방식을 유지하고, 나머지 15개의 양자화 레벨은 시간영역 비교기를 통하여 처리되도록 구성하여, 기존 5-bit FLASH ADC 대비 전압영역 비교기의 숫자를 48.4% 줄일 수 있었다. 시제품은 14 nm Fin Field-effect transistor (FinFET) 공정으로 제작되었으며 구현면적은 0.0024 mm², 전력소모는 0.8 V 전원전압에서 0.82 mW로 측정되었으며, 400 MS/s의 변환속도 21 MHz 정현파 입력에 대하여 ADC는 28.03 dB의 신호-대-잡음비 (SNDR), 즉 4.36 유효비트(ENOB)의 성능을 보였다.

• Clinical and Experimental Pediatrics
• /
• 제61권1호
• /
• pp.6-11
• /
• 2018

Purpose: Mid-upper-arm circumference (MUAC) is considered an alternative screening method for obesity. The aims of this investigation were to examine the ability of MUAC to correctly identify children with elevated body mass index (BMI) and to determine the best MUAC cutoff point for identification of children with high BMI. Methods: Anthropometric measurements (height, weight, and MUAC) from a cross-sectional sample of 7,921 Pakistani children aged 5-14 years were analyzed. Pearson correlation coefficients between MUAC and other anthropometric measurements were calculated. Receiver operating characteristic curve analysis was used to determine the optimal MUAC cutoff point for identifying children with high BMI. Results: Among 7,921 children, the mean (${\pm}$standard deviation) age, BMI, and MUAC were 10.00 (${\pm}2.86years$), 16.16 (${\pm}2.66kg/m^2$), and 17.73 (${\pm}2.59cm$), respectively. The MUAC had a strong positive correlation with BMI. The optimal MUAC cutoff points indicating elevated BMI in boys ranged from 16.76 to 22.73, while the corresponding values in girls ranged from 16.38 to 20.57. Conclusion: MUAC may be used as a simple indicator of overweight/obesity in children, with reasonable accuracy in clinical settings.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.273-276
• /
• 2004

A356 alloy is one of the most popular casting aluminum alloys due to its good castability. It is well known that the mechanical properties of A356 alloy strongly depend on its characteristic microstructure, such as the size of eutectic Si, primary $\alpha$ dendrite and so on. These microstructural features are determined during the casting and solidification process, which implies the strong relationship with mechanical properties with solidification methods. In the present study, the mechanical characteristics of A356 alloy was investigated by using squeeze cast control arm in terms of the microstructural features, such as the size of eutectic Si, primary a dendrite. By doing so, the most favorable microstructure of A356 could be determined for Al control arm that should be one of the most reliable parts in automobile.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1042-1045
• /
• 2003

In this paper, we present a new method for the monitoring of Electric Control Unit's(ECU) self-diagnostic and the sensor signals of vehicle through Web. In order to measure the ECU's self-diagnostic and sensor signals, the interfaced circuit is designed to communicate ECU and terminal according to the ISO, SAE regulation of communication protocol standard. Microprocessor 80C196KC is used for communicating ECU's self-diagnostic signals and the results are sent to the Embedded Linux System(ELS) through RF module. ELS is developed by SA1110, RF module, Embedded Linux. All commands related in ECU communication are executed through Web. The CGI program composed in web server is executed by user and will return sensor signals from ECU Software on Embedded Linux system is developed to monitor the ECU's sensor signals using the arm compiler tool chain in which RS232 port is programmed by half duplex method. The possibility for remote measurement of ECU sensor signal through Web is verified through the developed systems and algorithms.

• 한국직업건강간호학회지
• /
• 제13권1호
• /
• pp.19-29
• /
• 2004

Purpose: This study was conducted at small-to-medium-sized manufacture enterprises less than 300 employees. Method: For 167 workers in 12 small-to-medium-sized manufacture, we examined the self-recording questionnaires about general characteristics, health characteristics, occupational characteristics and subjective musculoskeletal symptoms designed by NIOSH. Result: Related factors of upper limb musculoskeletal symptoms were found in using of the PC except work, the speed control at working and inappropriate positions for neck, and that using of the PC except work, the degree of intensity at working and the speed control at working for shoulder, and that the degree of intensity at working, the speed control at working, inappropriate positions and excessive workforce for arm/elbow, and that the degree of intensity at working, the speed control at working, inappropriate positions, excessive strong and vibration for hand/wrist/fingers. Conclusion: As a result of multiple logistic regression analysis, musculoskeletal symptoms of neck were influenced by use of the PC except work, household work, and the speed control at working, symptoms of shoulder by using of the PC of except work and the degree of intensity at working, symptoms of arm/elbow by the speed control at working, and symptoms of hand/wrist/fingers by the degree of intensity at work and excessive workforce.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.65-69
• /
• 2004

The small form factor optical data storage devices are developing rapidly nowadays. Since it is designed for portable and compatibility with flash memory, its components such as disk, head, focusing actuator, and spindle motor should be assembled within 5 m thickness. The thickness of focusing actuator is within 2 mm and the total working range is $+/-100{\mu}m$, with the resolution of less than $1{\mu}m$. Since the thickness is limited tightly, it is hard to place the yoke that closes the magnetic circuit and hard to make strong flux density without yoke. Therefore, Halbach array is adopted to increase the magnetic flux of one side without yoke. The proposed Halbach array type focusing actuator has the advantage of thin actuation structure with sacrificing less flux density than conventional magnetic array. The optical head unit is moved on the swing arm type tracking actuator. Focusing coil is attached to swing arm, and Halbach magnet array is positioned at the bottom of deck along the tracking line, and focusing actuator exerts force by the Fleming's left hand rule. The working range and resolution of focusing actuator are analyzed with FEM and experiment.