• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.55-63
• /
• 1995

본 논문은 경계적분법에 의해 날개끝판이 부착된 프로펠러(EPP)의 성능을 해석하는 방법을 기술하고 있다. 나선 프로펠러 날개와 날개끝판을 사각형 판요소로 치환하고, 균일 세기의 쏘오스와 법선 다이폴을 분포하여 해석한다. 포텐셜을 기저로 하는 정식화 과정을 통해 적분방정식을 구하고, 나선날개와 날개끝판에서 동시에 법선방향 비침투조건을 만족시킴으로써 섭동 속도 포텐셜을 구하였다. Kutta조건은 반복작업을 통해 나선날개와 날개끝판의 뒷날에서 압력점프가 없어지도록 함으로써 만족시켰다. 예제계산을 통하여 날개끝판이 나선날개의 날개끝 부근의 하중을 증가시킴을 보였고, 동시에 날개끝판의 뒷날에 걸쳐 후연 보오텍스를 분산시킴으로써 강력한 날개끝 보오텍스의 형성을 피할 수 있음을 확인하였다. EPP의 성능을 추정한 결과는 실험결과와 좋은 일치를 보인다. 에너지절약 추진장치로 채택될 수 있는 EPP의 설계 및 해석을 위하여 본 연구에서 확립된 방법이 적용가능하리라 판단된다.

• Journal of Radiation Protection and Research
• /
• 제46권2호
• /
• pp.48-57
• /
• 2021

Background: In this study, the complexities of step-and-shoot intensity-modulated radiation therapy (IMRT) plans in magnetic resonance-guided radiation therapy systems were evaluated. Materials and Methods: Overall, 194 verification plans from the abdomen, prostate, and breast sites were collected using a ⁶⁰Co-based ViewRay radiotherapy system (ViewRay Inc., Cleveland, OH, USA). Various plan complexity metrics (PCMs) were calculated for each verification plan, including the modulation complexity score (MCS), plan-averaged beam area (PA), plan-averaged beam irregularity, plan-averaged edge (PE), plan-averaged beam modulation, number of segments, average area among all segments (AA/Seg), and total beam-on time (TBT). The plan deliverability was quantified in terms of gamma passing rates (GPRs) with a 1 mm/2% criterion, and the Pearson correlation coefficients between GPRs and various PCMs were analyzed. Results and Discussion: For the abdomen, prostate, and breast groups, the average GPRs with the 1 mm/2% criterion were 77.8 ± 6.0%, 79.8 ± 4.9%, and 84.7 ± 7.3%; PCMs were 0.263, 0.271, and 0.386; PAs were 15.001, 18.779, and 35.683; PEs were 1.575, 1.444, and 1.028; AA/Segs were 15.37, 19.89, and 36.64; and TBTs were 18.86, 19.33, and 5.91 minutes, respectively. The various PCMs, i.e., MCS, PA, PE, AA/Seg, and TBT, showed statistically significant Pearson correlation coefficients of 0.416, 0.627, -0.541, 0.635, and -0.397, respectively, with GPRs. Conclusion: The area-related metrics exhibited strong correlations with GPRs. Moreover, the AA/Seg metric can be used to estimate the IMRT plan accuracy without beam delivery in the ⁶⁰Co-based ViewRay radiotherapy system.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.375-387
• /
• 2018

This paper presents a review on progressive collapse mechanism of steel framed buildings exposed to fire. The influence of load ratios, strength of structural members (beam, column, slab, connection), fire scenarios, bracing systems, fire protections on the collapse mode and collapse time of structures is comprehensively reviewed. It is found that the key influencing factors include load ratio, fire scenario, bracing layout and fire protection. The application of strong beams, high load ratios, multi-compartment fires will lead to global downward collapse which is undesirable. The catenary action in beams and tensile membrane action in slabs contribute to the enhancement of structural collapse resistance, leading to a ductile collapse mechanism. It is recommended to increase the reinforcement ratio in the sagging and hogging region of slabs to not only enhance the tensile membrane action in the slab, but to prevent the failure of beam-to-column connections. It is also found that a frame may collapse in the cooling phase of compartment fires or under travelling fires. This is because that the steel members may experience maximum temperatures and maximum displacements under these two fire scenarios. An edge bay fire is more prone to induce the collapse of structures than a central bay fire. The progressive collapse of buildings can be effectively prevented by using bracing systems and fire protections. A combination of horizontal and vertical bracing systems as well as increasing the strength and stiffness of bracing members is recommended to enhance the collapse resistance. A protected frame dose not collapse immediately after the local failure but experiences a relatively long withstanding period of at least 60 mins. It is suggested to use three-dimensional models for accurate predictions of whether, when and how a structure collapses under various fire scenarios.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권4호
• /
• pp.327-333
• /
• 2021

Magnetic resonance imaging(MRI) uses strong magnetic field to image the cross-section of human body and has excellent image quality with no risk of radiation exposure. Because of above-mentioned advantages, MRI has been widely used in clinical fields. However, the noise generated in MRI degrades the quality of medical images and has a negative effect on quick and accurate diagnosis. In particular, examining a object with a detailed structure such as brain, image quality degradation becomes a problem for diagnosis. Therefore, in this study, we acquired T2 weighted 3D data of multiple sclerosis disease using BrainWeb simulation program, and used quantitative evaluation factors to find appropriate slice thickness among 1, 3, 5, and 7 mm. Coefficient of variation and contrast to noise ratio were calculated to evaluate the noise level, and root mean square error and peak signal to noise ratio were used to evaluate the similarity with the reference image. As a result, the noise level decreased as the slice thickness increased, while the similarity decreased after 5 mm. In conclusion, as the slice thickness increases, the noise is reduced and the image quality is improved. However, since the edge signal is lost due to overlapped signal, it is considered that selecting appropriate slice thickness is necessary.

• Structural Engineering and Mechanics
• /
• 제83권2호
• /
• pp.153-166
• /
• 2022

Structural pounding due to strong seismic excitations can result in severe damage or even collapse of colliding structures. Many researchers focused on studying the mutual pounding between two adjacent structures while very few researches were concerned with the pounding of a series of structures. This paper aims to study the pounding effect on a series of four buildings having different natural frequencies. The paper also investigates the effect of different arrangements of the four buildings on their pounding response. For this, a mathematical model was constructed using Matlab code where, pounding was modeled using a contact force-based approach. A Non-Linear viscoelastic (Hertzdamp) contact element was used and activated only during the approach period of collision. The mathematical model was validated by comparing its prediction versus experimental results on three adjacent buildings. Then the model was used to study the pounding between four adjacent structures arranged in different sequences according to their natural frequencies. The results revealed that increasing the gap distance generally led to decrease the peak responses of the towers. Such response is somehow different from that predicted earlier by the authors for the case of three adjacent buildings. Moreover, the arrangement of towers has a significant effect on their pounding response. Significant difference between the natural frequencies of adjacent structures increases the pounding forces especially when the more flexible buildings are located at the outer edge of the series. The study points out the need for further researches on buildings in series to gain a better understanding of such complex phenomena.

• Wind and Structures
• /
• 제34권5호
• /
• pp.437-450
• /
• 2022

Vortex-induced vibration (VIV) is a significant concern when designing slender structures with square cross sections. VIV strongly depends on structural dynamics and flow states, which depend on the conditions of the approaching flow and shape of a structure. Therefore, the effects of the angle of attack on the coupling effects of VIV for a square cylinder are expected to be significant in practice. In this study, the aerodynamic forces for a fixed and elastically mounted square cylinder were measured using wind pressure tests. Aerodynamic forces on the stationary cylinder are firstly discussed by comparisons of variation of statistical aerodynamic force and wind pressure coefficient with wind angle of attack. The coupling effect between the aerodynamic forces and the motion of the oscillating square cylinder by VIV is subsequently investigated in detail at typical wind angels of attack with occurrence of three typical flow regimes, i.e., leading-edge separation, separation bubble (reattachment), and attached flow. The coupling effect are illustrated by discussing the onset of VIV, characteristics of aerodynamic forces during VIV, and interaction between motion and aerodynamic forces. The results demonstrate that flow states can be classified based on final separation points or the occurrence of reattachment. These states significantly influence coupling effects of the oscillating cylinder. Vibration enhances vortex shedding, which creates strong fluctuations in aerodynamic forces. However, differences in the lock-in range, aerodynamic force, and interaction process for angles of attack smaller and larger than the critical angle of attack revealed noteworthy characteristics in the VIV of a square cylinder.

• 천문학회보
• /
• 제46권1호
• /
• pp.43.1-43.1
• /
• 2021

In this study, we suggest a new method to estimate the mass of a halo coronal mass ejection (CME) using synthetic CMEs. For this, we generate synthetic CMEs based on two assumptions: (1) the CME structure is a full ice-cream cone, (2) the CME electron density follows a power-law distribution (ρ_cme=ρ₀r^-n). The power-law exponent n is obtained by minimizing the root mean square error between the electron number density distributions of an observed CME and the corresponding synthetic CME at a position angle of the CME leading edge. By applying this methodology to 57 halo CMEs, we estimate two kinds of synthetic CME mass. One is a synthetic CME mass which considers only the observed CME region (M_cme1), the other is a synthetic CME mass which includes both the observed CME region and the occulted area larger than 4 solar radii (M_cme2). From these two cases, we derive conversion factors which are the ratio of a synthetic CME mass to an observed CME mass. The conversion factor for M_cme1 ranges from 1.4 to 3.0 and its average is 2.0. For M_cme2, the factor ranges from 1.8 to 5.0 with the average of 3.0. These results imply that the observed halo CME mass can be underestimated by about 2 times when we consider the observed CME region, and about 3 times when we consider the region including the occulted area. Interestingly these conversion factors have a very strong negative correlation with angular widths of halo CMEs.We also compare the results with the CME mass estimated from STEREO observations.

• 산업경영시스템학회지
• /
• 제46권2호
• /
• pp.13-21
• /
• 2023

In the recent era of the fourth industrial revolution, many industries aim to maximize the efficiency of products and services by introducing cutting-edge technologies such as artificial intelligence and big data. In this situation, organizational culture is changing a lot due to the influx of the MZ generation with strong individualistic tendencies and the decreased face-to-face communication between members. However, active communication with colleagues is still essential to maximize performance, and the margins created by simplifying work processes and automating processes must be used for creating work performance. This requires cooperation and commitment through the job immersion of members who have an active attitude. This study analyzed how the organization's autonomous work environment and trust among members, which are creative work performance conditions, affect job immersion using raw data from the Occupational Safety and Health Research Institute. As a result, it was found that both the organization's autonomous working environment and trust among members significantly effected the members' job immersion. in order to achieve productivity and value improvement in companies, efforts are needed to increase workers' job immersion by building an autonomous working environment and trust among members. The results of this study are expected to contribute significantly to the search for ways to increase workers' job commitment to improve organizational productivity.

• 한국진공학회지
• /
• 제19권4호
• /
• pp.293-299
• /
• 2010

수열합성법으로 실리콘 (111) 기판 위에 산화아연 나노막대를 성장하였다. 산화아연 나노막대를 성장하기 전, 실리콘 기판에 스핀코팅법으로 씨앗층을 성장하였다. 산화아연 나노막대는 오토클레이브(autoclave)로 $140^{\circ}C$에서 6시간 동안 성장하였고, 아르곤 분위기에서 300, 500, $700^{\circ}C$의 온도로 20분 동안 열처리하였다. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), photoluminescence (PL)를 이용하여 열처리한 산화아연 나노막대의 구조적, 광학적 특성을 분석하였다. 모든 산화아연 나노막대 시료에서 c-축 배향성을 나타내는 강한 ZnO (002) 회절 피크와 약한 ZnO (004) 회절 피크가 나타났다. 열처리 온도가 증가함에 따라 산화아연 나노로드의 residual stress는 compressive에서 tensile로 변하였다. Hexagonal 형태의 산화아연 나노로드를 관찰하였다. 산화아연 나노로드의 PL 스펙트럼은 free-exciton recombination에 의해 3.2 eV에서 좁은 near-band-edge emission (NBE) 피크와 산화아연 나노막대의 결함에 의해 2.12~1.96 eV에서 넓은 deep-level emission (DLE) 피크가 나타났다. 산화아연 나노막대를 열처리함에 따라, NBE 피크의 세기는 감소하였고 DLE 피크는 열처리에 의해 발생한 산소 관련 결함에 의하여 적색편이 하였다.

• International Journal of Oral Biology
• /
• 제32권1호
• /
• pp.13-22
• /
• 2007

The stem cell research is emerging as a cutting edge topic for a new treatment for many chronic diseases. Recently, dental stem cell would be possible for regeneration of tooth itself as well as periodontal tissue. However, the study of the cell characterization is scarce. Therefore, we performed the genetic profiling and the characterization of mouse fetus/neonate derived dental tissue and cell to find the identification during dental development. We separated dental arch from mandibles of 14.5 d fetal mice and neonate 0 d under the stereoscope, and isolated dental cells primarily from the tissues. Then, we examined morphology and the gene expression profiles of the primary cells and dental tissues from fetus/neonate and adult with RT-PCR. Primary dental cells showed heterogeneous but the majority was shown as fibroblast-like morphology. The change of population doubling time levels (PDLs) showed that the primary dental cells have growth potential and could be expanded under our culture conditions without reduction of growth rate. Immunocytochemical and flow cytometric analyses were performed to characterize the primary dental cell populations from both of fetus (E14.5) and neonate. Alpha smooth muscle actin (${\alpha}-SMA$), vimentin, and von Willebrand factor showed strong expression, but desmin positive cells were not detected in the primary dental cells. Most of the markers were not uniformly expressed, but found in subsets of cells, indicating that the primary dental cell population is heterogeneous, and characteristics of the populations were changed during culture period. And mesenchymal stem cell markers were highly expressed. Gene expression profile showed Wnt family and its related signaling molecules, growth factors, transcription factors and tooth specific molecules were expressed both fetal and neonatal tissue. The tooth specific genes (enamelin, amelogenin, and DSPP) only expressed in neonate and adult stage. These expression patterns appeared same as primary fetal and neonatal cells. In this study we isolated primary cells from whole mandible of fetal and neonatal mice. And we investigated the characteristics of the primary cells and the profile of gene expressions, which are involved in epithelial-mesenchymal interactions during tooth development. Taken together, the primary dental cells in early passages or fetal and neonatal mandibles could be useful stem cell resources.