• 한국결정학회지
• /
• 제14권2호
• /
• pp.93-104
• /
• 2003

The crystals of group-Ⅲ nitride semiconductors with wurtzite structure exhibit a strong polarity. Especially, GaN has characteristics of different growth rate, anisotropic electrical and optical properties due to the polarity. In this work, GaN epilayer was grown and the polarities of the crystals were observed by the chemical wet etching and SP-EFM. GaN thin films were deposited on c-plane A1₂O₃ substrate under the variations of growth conditions by HVPE such as the deposition temperature of the buffer layer, the deposition time, the ratio of Group-V and Ⅲ and the deposition temperature of the film. The adquate results were obtained under the conditions of 500℃, 90 seconds, 1333 and 1080℃, respectively. It is observed that the GaN layer grown without the buffer layer has N-polarity and the GaN layer grown on the buffer layer has Ga-polarity. Fine crystal single particles were grown on c-plane A1₂O₃ and SiO₂, layer. The external shape of the crystal shows ｛10-11｝｛10-10｝(000-1) planes as expected in the PBC theory and anisotropic behavior along c-axis is obvious. As a result of etching on each plane, (000-1) and ｛10-11｝planes were etched strongly due to the N-polarity and ｛10-10｝ plane was not affected due to the non-polarity. In the case of the crystal grown on c-plane A1₂O₃, two types of crystals were grown. They were hexagonal pyramidal-shape with ｛10-11｝plane and hexagonal prism with basal plane. The latter might be grown by twin plane reentrant edge (TPRE) growth.

• 한국지능시스템학회논문지
• /
• 제14권5호
• /
• pp.563-570
• /
• 2004

Genetic algorithms have been successfully applied to various optimization problems belonging to NP-hard problems. The sequential ordering problems(SOP) and the job shop scheduling problems(JSP) are well-known NP-hard problems with strong influence on industrial applications. Both problems share some common properties in that they have some imposed precedence constraints. When genetic algorithms are applied to this kind of problems, it is desirable for genetic operators to be designed to produce chromosomes satisfying the imposed precedence constraints. Several genetic operators applicable to such problems have been proposed. We call such genetic operators precedence-preserving genetic operators. This paper presents three existing precedence-preserving genetic operators: Precedence -Preserving Crossover(PPX), Precedence-preserving Order-based Crossover (POX), and Maximum Partial Order! Arbitrary Insertion (MPO/AI). In addition, it proposes two new operators named Precedence-Preserving Edge Recombination (PPER) and Multiple Selection Precedence-preserving Order-based Crossover (MSPOX) applicable to such problems. It compares the performance of these genetic operators for SOP and JSP in the perspective of their solution quality and execution time.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1091-1096
• /
• 2003

Ion implantation in polymeric materials can induce dramatic chemical modifications, such as bond breaking, cross linking, formation of new chemical products, which have strong influences on the macroscopic properties of the materials. In this study ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate change of the optical transmittance property focusing ultraviolet ray range(200-400nm). PC was irradiated with N, Ar, Kr, Xe ions at the ion energy of 50keV and the dose range of 5 ${\times}$ 10$\^$15/, 1 ${\times}$ 10$\^$16/, 7${\times}$10$\^$16/ ions/$\textrm{cm}^2$. FT-IR, XPS, UV/Vis transmittance spectroscopy measurement technologies were employed to obtain chemical. structural properties and optical transmittance of irradiated polymer. The original PC(unimplanted) is quite transparent that it has more than 88% transmittance in the range UV-A(320∼400nm), but after ion implantation, surface colors were changed to the dark brown and the transmittance of UV ray decreased for all implantation condition, and the absorption edge was shift to visible range with increasing mass of implanted ion species and dose.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.39-39
• /
• 2010

The authors have an extensive study of photoluminescences for Zn-polar and O-polar faces of single-crystalline ZnO bulks. In the photoluminescence (PL) spectra at 10 K, Zn-polar and O-polar faces show a common emission feature: neutral donor-bound excitons and their longitudinal-optical (LO) phonon replicas are strong, and free excitons are very weak. However, in the PL spectra at room temperature (RT), Zn-polar and O-polar faces show extremely different emission characteristics: the emission intensity of Zn-polar face is 30 times larger than that of O-polar face, and the band edge of Zn-polar face is 33 meV red-shifted from that of O-polar face. The temperature dependence of photoluminescence indicates that the PL spectra at RT are closely associated with free excitons and their phonon-assisted annihilation processes. As a result, it is found that the RT PL spectra of Zn-polar face is dominated by the first-order LO phonon replica of A free excitons, while that of O-polar face is determined by A free excitons. This is ascribed that Zn-polar face has larger exciton-phonon coupling strength than O-polar face.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.104-110
• /
• 2008

Detached Eddy Simulation (DES) is applied to an axisymmetric base flow at supersonic mainstream. DES is a hybrid approach to modeling turbulence that combines the best features of the Reynolds-averaged Navier-Stokes RANS) and large-eddy simulation (LES) approaches. In the Reynolds-averaged mode, the model is currently based on either the Spalart-Allmaras (S-A) turbulence model. In the large eddy simulation mode, it is based on the Smagorinski subgrid scale model. Accurate predictions of the base flowfield and base pressure are successfully achieved by using the DES methodology with less computational cost than that of pure LES and monotone integrated large-eddy simulation (MILES) approaches. The DES accurately resolves the physics of unsteady turbulent motions, such as shear layer rollup, large-eddy motions in the downstream region, small-eddy motions inside the recirculating region. Comparison of the results shows that it is necessary to resolve approaching boundary layers and free shear-layer velocity profiles from the base edge correctly for the accurate prediction of base flows. The consideration of an empirical constant CDES for a compressible flow analysis may suggest that the optimal value of empirical constant CDES may be larger in the flows with strong compressibility than in incompressible flows.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.104-110
• /
• 2008

Detached Eddy Simulation (DES) is applied to an axisymmetric base flow at supersonic mainstream. DES is a hybrid approach to modeling turbulence that combines the best features of the Reynolds-averaged Navier-Stokes (RANS) and large-eddy simulation (LES) approaches. In the Reynolds-averaged mode, the model is currently based on either the Spalart-Allmaras (S-A) turbulence model. In the large eddy simulation mode, it is based on the Smagorinski subgrid scale model. Accurate predictions of the base flowfield and base pressure are successfully achieved by using the DES methodology with less computational cost than that of pure LES and monotone integrated large-eddy simulation (MILES) approaches. The DES accurately resolves the physics of unsteady turbulent motions, such as shear layer rollup, large-eddy motions in the downstream region, small-eddy motions inside the recirculating region. Comparison of the results shows that it is necessary to resolve approaching boundary layers and free shear-layer velocity profiles from the base edge correctly for the accurate prediction of base flows. The consideration of an empirical constant CDES for a compressible flow analysis may suggest that the optimal value of empirical constant CDES may be larger in the flows with strong compressibility than in incompressible flows.

• 재활복지공학회논문지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2015

국외의 재활보조기기 추세를 분석하였다. 접어지는 기능이 강화되고, 기존의 동력이 없는 장치에 전동구동 보조모듈이 추가되고, 전반적인 보조기기의 완성도가 향상되고 있다. 특히, 접어지는 기능을 포함한 휴대 및 보관하기 용이한 이동 보조기기가 증가하고 있다. 동력 보조 휠 및 상지보조 모듈이 시장에 진입하고 있다. 상대적으로 성숙된 최신기술을 적용한 신개념의 휠체어가 시장이 나오고 있다. 최신 로봇기술을 응용한 하지 외골격 로봇이 경쟁체제에 돌입하였다. 기립형 휠체어, 경사로, 간단한 계단 이동보조장치가 보편화 되고 있다. 보조기기와 다양한 스마트기기가 결합되고 있다. 이외에도 멋진 디자인, 소재, 가공기술 등에 의한 완성도가 제고 되고 있다.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.163-176
• /
• 1994

Over the last few years Total Quality Management (TQM) programs have hem widely adapted by Korean manufacturing firms to improve their productivity, competitive edge and product quality levels. The purpose of this study is to evaluate the level of importance placed on four key TQM factors (customer satisfaction, strong management leadership, continuous improvement, imployee involvement and participation) used during the implementation of korean manufacturing TQM programs and to assess the effectiveness of those key factors in improving the performance of the firms. A Questionaire was developed and sent to senior managers in manufacturing organizations throughout korea. This survey asked qustions regarding 1) the firm's business environment and TQM program development 2) subcomponents of the key factors and 3) the effectiveness of the TQM program at improving the performance of the organization. The survey data were analyzed to determine the degree of correlation between each of the factors and the effectiveness of the TQM programs. This study demonstrated that the TQM programs were instrumental at improving the performance of the firms studied, and that the improvement was positively correlated with the length of time that the program had been implemented and the planned duration of the TQM program implementation. It was found that the person-oriented elements of management leadership and employee involvement were positively correlated and predictive of the success of the TQM Program, while the process-oriented components of customer satisfaction and employee involvement were not useful predictors of the effectiveness of the TQM program implementation.

• 한국중재학회지:중재연구
• /
• 제19권3호
• /
• pp.121-139
• /
• 2009

In this rapidly changing knowledge-based society, technology is regarded as one of critical factors for competitive edge and sustainable growth. Therefore, most of countries in the world have strengthened their efforts to promote industrial technology innovation and development. In Korea, KIAT(Korea Institute for Advancement of Technology) newly established m May 2009 as a quasi-government institute with the integration of six organizations including KTTC(Korea Technology Transfer Center) has played a crucial role in transferring and commercializing industrial technologies between public and private sectors. Generally, technology transfer and commercialization have been conducted by the contracts which are very detailed, complex and diverse. To solve any disputes and controversies between the parties, it is essential to make a prior agreement on the amicable settlement by the use of Arbitration Clause. By reviewing the characteristics, process, current situation and model contracts of domestic technology transfer in Korea, it is quite recommend for arbitration-related organizations such as KCAB(Korean Commercial Arbitration Board) to foster the strong campaign for the popular use of Arbitration Clause. It will contribute to settle any disputes and controversies between the parties more speedy, economically and rationally, thereby promoting the technology transfer and commercialization in Korea.

• 조명전기설비학회논문지
• /
• 제19권1호
• /
• pp.9-14
• /
• 2005

Fabry-Perot 레이저 다이오드의 missing mode의 원인으로 의심되는 활성층 내의 구조적 결함과 리플의 영향을 TDLM(time domain laser model)방식을 사용하여 모델링하였다. 보다 정확한 모델링의 결과를 얻기 위하여 여러가지 비선형 효과를 추가 고려하였다. 이를 이용하여 레이저 다이오드를 시뮬레이션하였고, 모드 스펙트럼(mode spectrum)을 구하였다. 실제 레이저 다이오드의 missing mode를 측정하기 위한 실험 장비를 구성하여 측정 결과를 추출하였고, 시뮬레이션과 측정 실험 결과로부터 결론을 내렸다.