• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1859-1861
• /
• 2005

The ZnO:Al thin films were prepared on glass by Facing Target Sputtering (FTS) system. We investigated electrical, optical, and structural properties of AZO thin film with sputtering current $0.1[A]{\sim}0.6[A]$. We obtained the lowest resistivity $2.3{\times}10^{-4}[{\Omega}-cm]$ at sputtering current 0.6[A] from the 4-point probe and the strong (002) peak at sputtering current 0.3[A] from the X-ray Diffractometer (XRD ). The optical transmittance of AZO thin films show a very high transmittance of $80{\sim}95%$ in the visible range and exhibit the absorption edge of about 350nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.739-742
• /
• 2000

Nanostructured ZnS thin films were grown on the slide glass substrate by the chemical bath deposition using an aqueous so1ution Of ZnSO$_4$and CH$_3$CSNH$_2$at 95$^{\circ}C$. The average grain sizes of the ZnS thin film estimating from the Debye-Scherrer formula are 4.8 nm. The optical transmittance edge of the ZnS thin films (4.0 eV) was shifted to the shelter wavelength compared with that of the bulk ZnS (3.67 eV) due to the quantum size effects. The ZnS thin films showed a strong photoluminescence intensity and a sharp emission band from 410 to 480 nm 3t room temperature. The PWHM of photoluminescence peak was about 40 nm. For the viloet(410 nm) and blue(480 nm) emission of the ZnS thin films, the temperature dependence can be described by an Arrhenius equation with an activation energy of 168 and 157 meV, respectively.

• 대한금속재료학회지
• /
• 제50권3호
• /
• pp.233-236
• /
• 2012

ZnO nanowires were fabricated through thermal evaporation of Zn or ZnS powder using solar energy. The Zn or ZnS powder was heated and evaporated by sunlight. The sunlight was concentrated on the Zn or ZnS powder by a converging lens and then the Zn or ZnS powder was evaporated and oxidized in air. After oxidation, ZnO nanowires were fabricated in the focal point. Strong ultraviolet emission, which corresponds to the near band-edge emission, was observed from the ZnO nanowires synthesized using Zn powder as a source material. Meanwhile, green emission, related to intrinsic defects such as oxygen vacancies, prevailed for the ZnO nanowires fabricated using ZnS powder. No catalysts were used in the fabrication of the ZnO nanowires, which suggested the ZnO nanowires were grown by a vapor-solid mechanism.

• Structural Engineering and Mechanics
• /
• 제3권3호
• /
• pp.255-272
• /
• 1995

The paper considers aspects of the energy dissipation response of selected realistic forms of torsionally balanced and torsionally unbalanced building systems, responding to an ensemble of strong-motion earthquake records. Focus is placed on the proportion of the input seismic energy which is dissipated hysteretically, and the distribution of this energy amongst the various lateral load-resisting structural elements. Systems considered comprise those in which torsional effects are discounted in the design, and systems designed for torsion by typical code-defined procedures as incorporated in the New Zealand seismic standard. It is concluded that torsional response has a fundamentally significant influence on the energy dissipation demand of the critical edge elements, and that therefore the allocation of appropriate levels of yielding strength to these elements is a paramount design consideration. Finally, it is suggested that energy-based response parameters be developed in order to assist evaluations of the effectiveness of code torsional provisions in controlling damage to key structural elements in severe earthquakes.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.97-101
• /
• 2005

The ZnO:Al thin films were prepared on glass by Facing Target Sputtering (FTS) system. We investigated electrical, optical, and structural properties of AZO thin film with sputter ins current 0.1[A]-0.6[A]. We obtained the lowest resistivity $2.3{\times}\;10^{-4}[{\Omega}-cm]$ at sputtering current 0.6[A] from the 4-point probe and the strong (002) peak at sputtering current 0.3[A] from the X-ray Diffractometer (XRD). The optical transmittance of AZO thin films show a very high transmittance of $80\~95\%$ in the visible range and exhibit the absorpt ion edge of about 350 nm.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1182-1184
• /
• 2018

The combination of angular spin momentum with electronics is a promising successor to charge-based electronics. The conduction bands in GaAs may become spin-polarized via optical spin pumping, doping with magnetic ions, or induction of a moment with an external magnetic field. We investigated the spin populations in GaAs with x-ray magnetic circular dichroism for each of these three cases. We find strong anti-symmetric lineshapes at the Ga $L_3$ edge indicating conduction band spin splitting, with differences in line width and amplitude depending on the source of spin polarization.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.78-82
• /
• 2023

The Israeli military's track record boasts victories in four Middle East wars and numerous counter-terrorism battles. This can be attributed to the implementation of a flexible defense acquisition system, allowing for the rapid acquisition of cutting-edge weaponry in response to ever-changing enemy vulnerabilities. If Korea were to adopt the defense acquisition system employed by the Israeli Defense Forces (IDF) it has the potential to transform into a small but strong country, mirroring the accomplishments of the IDF.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3866-3873
• /
• 2023

In 4th^-generation storage rings, whether to operate the beam as round or flat is a critical question. A round beam has equal horizontal and vertical emittances, and is an efficient solution to reduce strong intra-beam scattering effects and lengthen the Touschek lifetimes, but a flat beam produces a brighter photon beam than a round beam. To provide both beams concurrently rather than bifurcating the beam time, this paper presents the exploitation of beam dynamics and the cutting-edge fast pulser that supports concurrent operation of round beam and flat beam.

• Tribology and Lubricants
• /
• 제39권6호
• /
• pp.228-234
• /
• 2023

In this study, reciprocating wear tests are performed on AISI 52100 bearing steel to investigate its tribological behavior in a hexagonal boron nitride (h-BN) water solution. The h-BN-based aqueous lubricant is prepared using an atoxic procedure called ultrasonic sonication in pure water. Ball-on-flat reciprocating sliding experiments are conducted, where the ball is slewed on a fixed flat at 50-㎛ displacement. The lubricating behavior of h-BN is compared with that of deionized (DI) water. Results show that the friction coefficient is higher in h-BN testing than that in DI tests, but the results are equalized as the friction coefficient reaches a stable level. Scanning electron microscopic images reveal significant material loss in the center and mild abrasion on the edge of the wear scar in h-BN tests. However, these effects are minor in DI water situations. The results of energy-dispersive X-ray spectroscopy show that considerable oxidation occurs in the central zone of the wear scar in h-BN cases with strong adhesion and material removal. These findings reveal the importance of determining ideal circumstances that can tolerate material friction and wear.

• 지구물리와물리탐사
• /
• 제20권2호
• /
• pp.61-71
• /
• 2017

최근 도심 내 지반침하 사고가 증가하면서 지하공동 분포의 정밀한 조사를 위하여 지표레이다 탐사가 활발히 진행되고 있다. 하지만, 지표레이다 탐사 자료의 일반적인 해석은 기초적인 자료처리만 적용된 후, 주관적인 분석이 수행되기 때문에 해석 결과의 신뢰도 문제가 발생하게 된다. 이러한 문제를 개선하기 위하여 이 연구에서는 영상처리 분야 기술 중에 하나인 모서리 탐지 기법을 지표레이다 탐사 자료의 공동 및 파이프와 같은 강력한 회절원에 의한 이벤트에 적용시켜 그 특성을 분석하였다. 분석을 위하여 공동 또는 매설관로 등에 대해 얻어진 지표레이다 탐사 현장자료에 영상처리 기술을 적용하였다. 그 결과, 모서리 탐지 기법을 이용하여 공동 또는 매설관로 등의 회절원에 의한 주요 이벤트들이 효과적으로 분리되는 것을 확인할 수 있었다. 또한, 급격한 경사를 가지며 기록되는 강력한 회절원에 의한 이벤트와 달리 지반침하를 일으키는 공동은 비교적 넓은 규모를 가지고 있어 완만한 경사 이벤트로 기록되기 때문에 진폭변화에 따른 방향성 분석을 통해 회절원에 의한 이벤트들과 효과적으로 분리할 수 있었다. 효과적으로 분리된 결과들을 바탕으로 해석을 수행하게 되면 지하공동 분석 시 신뢰도를 향상시킬 수 있을 것이라고 생각한다. 향후, 이러한 기법들이 많은 현장자료에 대해 검증을 거친다면 방대한 양의 지표레이다 탐사 자료 해석의 반자동화에도 기여할 수 있을 것이라고 기대된다.