• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.136-144
• /
• 1996

We developed a part of stroke sensing cylinder for position control of automatic excavator and its measurement system. In this paper, for development of stroke sensing cylinder, we consist of 2-axis control instrument system with Hall sensor. A performance of piston rod with magnetic scales is evaluated by the developed measurement system. Furthermore, the position control for good performance of instrument system is achieved by a sliding mode control which is a new method diminishing the chattering in that control by setting 2-dead band along the swtching line. The unknown parameters for sliding mode control are estimated by the signal compression method.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.450-458
• /
• 2013

The aim of this study was to develop and verify gait training system for post-stroke hemiplegia patients with step length asymmetry. Most post-stroke hemiplegic patients show gait asymmetry and weight shifting training has been suggested as a useful method for improving the walking ability. However, verbal cue by physical therapist may be not effective. Therefore, our weight shift training system was designed to give a feedback to patients through precise plantar pressure and center of pressure (COP) measurement. This weight shifting biofeedback training system is composed of F-Scan plantar pressure measurement system and software development kit (SDK) for Windows operating system. Two post-stroke patients with step length asymmetry were enrolled in this study. After training for six weeks, the weight shift score and step length ratio of two all patients were improved and approached to them of non-disabled. This system developed in this study may improve the step length asymmetry, and therefore this system is also expected to improve a walking ability in hemiplegic patients.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1932-1938
• /
• 2012

The impedance cardiogram has been proposed as a non-invasive, continuous, operator independent, and cost-effective method for cardiac output monitoring. However, it can not be completely considered as non-restrictive method because of attached spot and band type electrodes. Therefore, we developed a improved convenient hand-held typed measurement system for cardiac output by electrical impedance technique. 80 subjects from Yonsei University and the surrounding areas, participated. All subjects measured stroke volume and cardiac output through Physioflow and developed system. To verify the developed system, statistical methods such as correlation, Wilcoxon signed ranks test, and the Bland-Altman analysis were used. The proposed system showed significant correlation in both male and female stroke volume(r=0.715, r=0.704) and cardiac output(r=0.826; r=0.804). From these results, it can be concluded that stroke volume and cardiac output could be improved convenient measurement using the both hands without the help of a specialist.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.185-190
• /
• 2005

The purpose of this study is to design electrical stimulation system fur stroke patients with pharyngeal dysfunction(dysphagia). Dysphagia is that the food has trouble in passing to the mouth from the stomach. Although we have many treatment methods for dysphagia, electrical stimulation system will be useful for stroke patients having dysphagia. Electrical stimulation system can be divided into body and electrodes. The body stimulation is composed to frequency counter, time control and current measurement part. These parts are to control the frequency, stimulating time and current intensity And they can be variable according to the patient's clinical assessment. The electrode plays a role to deliver the current from the system to the muscle. Also the position of the electrode can be variable according to the treatment method. We performed the clinical experiment with stroke patients who had swallowing disorder. The videofluoroscopy was used fur the observation. From the result of clinical experiment based on electrical stimulation, we expected that the dysfunction(in pharynx) level of the patient could be improved. However we could not have enough effectiveness of the treatment because of the number of patients, patient's adaptation and treatment period. We will design the optimized electrical stimulation system based on enough clinical experiment in the future.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1232-1235
• /
• 2004

The purpose of this study is to design electrical stimulation system for pharyngeal dysfunction(dysphagia) in stroke patients. Pharyngeal muscle group activity is important, because contracting muscles provide the driving force at the initiation of the swallow and generate the pressure gradients necessary for bolus movement into the esophagus. Although we have many treatment methods for dysphagia, electrical stimulation system will be useful for stroke patients having dysphagia. Electrical stimulation can be divided into the body stimulation and electrodes. The body stimulation is divided again into frequency counter, time control and current measurement part. These parts are to control the current intensity, frequency and stimulating time. And they can be variable according to the patient's clinical assessment. The electrode plays a role to deliver the current from the system to the muscle. Also the position of the electrode can be variable according to the treatment method. We performed the clinical experiment with the stroke patient who has swallowing disorder. The videofluoroscopy was used for the observation. From the result of clinical experiment based on electrical stimulation, we expected that the dysfunction(in pharynx) level of the patient can be improved. However we could not have enough effectiveness of the treatment because of the number of patients, patient's adaptation and treatment period. We will design the optimized electrical stimulation system based on enough clinical experiment in the future.

• The Journal of Korean Physical Therapy
• /
• 제31권3호
• /
• pp.141-146
• /
• 2019

Purpose: To investigate the effect of an augmented reality (AR) system on muscle strength and function level of the paretic lower limb and the balance ability in the early rehabilitation program of acute stroke patients. Methods: The participants (30 or fewer days after stroke) were randomly assigned to receive intervention with an early rehabilitation program using an AR system (n=1) or an early rehabilitation program consisting of functional electrical stimulation and tilt table use (n=1). Patients in both subjects received interventions 4-5 times a week for 3 weeks. Results: In the paretic limb muscle strength, AR subject was increased from 15 to 39.6 Nm and Control subject was increased from 5 to 30.2 Nm. The paretic limb function of AR subject motor function was increased from 8 to 28 score and Control subject motor function was increased from 6 to 14 score. But sensory function was very little difference between the two subjects (AR subject: from 4 to 10 score, Control subject: from 3 to 10 score). In the balance ability, AR subject had more difference after intervention than control subject (AR subject: 33 score, Control subject: 22 score). Conclusion: The early rehabilitation program using the AR system showed a slightly higher improvement in the motor function of the paretic lower limb and balance ability measurement than the general early rehabilitation program. The AR system, which can provide more active, task-oriented, and motivational environment, may provide a meaningful environment for the initial rehabilitation process after stroke.

• 한국운동역학회지
• /
• 제20권2호
• /
• pp.239-243
• /
• 2010

The putting stroke accounts for 40~50% of total stroke for a golf rounding and most golfers have difficulties on the puting. Studies for the putting stroke have been conducted by analyzing various factors such as kinematics, kinetics, psychologic and physiologic parameters. A lot of devices were developed to support the studies. However there was no appropriate method to measure the position of the ball quantitatively. In this study, we developed a new measurement system to measure and evaluate the putting result. The developed system uses a USB camera to take the 2-dimensional image of the surface including the hole cup at the center of the image and the ball. The position of the ball is extracted as a set of distance and angle in polar coordinate system. We evaluated the new system with an indoor set-up for putting experiments and the system provided accurate measurement results. The proposed system can be combined with the other measurement systems such as 3D motion capture system and force plate without any restriction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.375-380
• /
• 1993

We developed a part of stroke sensing cylinder and its measurement system for system for automatic excavator. In this paper, for development of stroke sensing sylinder, we consist of 2-axis control instrument system with magnetic sensor. A Performence of cylinder rod with magnetic scales is evaluated by its system. Furthmore, the position control for good performance of instrument system is achieved by a sliding mode control which is a new method diminishing the chattering in that control by setting 2-dead band along the swtching line. The unknown parameters for sliding mode control are estimated by the signal compression method.

• 한국엔터테인먼트산업학회논문지
• /
• 제14권3호
• /
• pp.363-373
• /
• 2020

본 연구는 뇌졸중 환자에게 엔터테인먼트요소가 가미된 가상현실과 시각적 되먹임 보행 훈련 프로그램을 병행하여 보행능력과 삶의 질을 향상시키고자 하였다. 이에 휘돌림 보행을 하는 뇌졸중 환자 10명을 선정하여, 가상현실과 힘판을 통한 시각적 되먹임 트레드밀보행훈련을 일일 30분씩, 주5회, 5주간 총 25회 실시하였다. 이러한 보행훈련의 효과를 알아보기 위해 관절가동범위검사, 근활성도 검사, 버그 균형 척도(BBS), 보행분석, 삶의 질(SS-QOL) 평가를 중재 전·후 시행하였다. 본 연구결과, 보행 흔듦기 시기에 마비측 관절가동범위와 근활성도, 동적균형능력, 보행능력, 삶의 질이 중재 후 통계학적으로 유의하게 차이가 있었다(p<0.05). 본 연구결과를 통해 본 연구의 보행훈련이 휘돌림 보행을 하는 뇌졸중 환자의 발처짐, 근활성도, 동적 균형 및 보행능력을 향상시키고, 이로 인한 삶의 질도 개선하는 것을 알 수 있었다. 따라서 휘돌림 보행을 하는 뇌졸중 환자의 보행능력 향상과 삶의 질 개선을 통한 라이프케어증진을 위해 가상현실과 힘판을 통한 시각적 되먹임 트레드밀보행훈련 프로그램 적용을 권장한다.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.16-21
• /
• 2011

The effects of stroke change on turbulent kinetic energy for the in-cylinder flow of a four-valve SI engine were studied. For this study, the same intake manifold, head, cylinder, and the piston were used to examine turbulence characteristics in two different strokes. In-cylinder flow measurements were conducted using three dimensional LDV system. The measurement method, which simultaneously collects 3-D velocity data, allowed a evaluation of turbulent kinetic energy inside a cylinder. High levels of turbulent kinetic energy were found in regions of high shear flow, attributed to the collisions of intake flows. These specific results support the more general conclusion that the inlet conditions play the dominant role in the generation of the turbulence fields during the intake stroke. However, in the absence of two counter rotating vortices, this intake generated turbulent kinetic energy continues to decrease but at a much faster rate.