• 한국표면공학회지
• /
• 제31권6호
• /
• pp.371-378
• /
• 1998

The zind bate contaminated in the hot dip galvannealed operation was successfully by appling the dross formation mechanism ; the Fe content was lowered from 0.028% to 0.011% and the dress size was decreased from 15~20$\mu\textrm{m}$ to under 3$\mu\textrm{m}$. The cooled metal from CGL zinc bath during operation of the galvannealed steel strip was remelted in graphite crucible at the lab and agitated after increasing Al content from 0.14% to 0.16% with decreasing the molten metal temperature from $470^{\circ}C$to $445^{\circ}C$. The agitating was done by agitator and nitrogen. The molten was analyed by SEM and EDS. It was considered that the Fe and the bottom dross($FeZN_7$) could react with aluminium to from the float dress($Fe_2Al_5$) according to the molten metal temperature down and the float dress rise to the surface of the zine bath. So the Fe and dross in the bath could be romoved out of the bath. It was confirmed that the proper purication conditions of GA zine bath is 0.02% of Al increasing, bath temperature down from $460^{\circ}C$ to $450^{\circ}C$and agitator and nitrogen.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권11호
• /
• pp.536-543
• /
• 2003

In this paper, we describe a unique self oscillating and mixing (SOM) down-converter design using a modified defected ground structure (DGS). The proposed SOM converter is consisted of self-oscillator, which can produce negative resistance and select resonance frequency, RF matching circuit, and IF low pass filter. As the advantage of this SOM converter can mix LO and RF signals as well as inducing LO signal with only one active device. it is designed as a simple structure and the low cost. Also, there is easy advantage to be applied in RFIC/MMIC technology because it offers excellent phase noise performance in spite of using micro-strip structure. The LO signal for the proposed SOM converter is designed at 1㎓ and RF frequency was chosen to be 800MHz. The achieved conversion loss and phase noise performances of the implemented SOM converter are 15㏈ and -95dBc/Hz at 100KHz offset frequency respectively. The equivalent circuit parameters for DGS are extracted by using a three dimensional EM simulator and simple circuit analysis method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권9호
• /
• pp.1455-1462
• /
• 2020

Objective: The purpose of this study was to investigate whether goose growth and feather characteristics are influenced by their line and feeding surroundings, inclusive of floor materials and types, since there are no reports regarding these factors. Methods: The 240 White Roman geese which were hatched and sex identified came from 3 commercial goose farms. They were randomly distributed to 24 pens depending on a completely random design. The study continued for 13 weeks and included 3 lines of commercial geese and 2 floor types (cement strip floor [CSF] or cement floor [CF]). Results: The day one gosling weight from A farm was lower than other two farms (96 g vs 107 and 115 g; p<0.001). Afterwards, the body weight, back length, keel length, chest girth and main wing feather length among 3 farms showed no significance difference prior to 12 weeks. The CF group showed heavier body weight, shorter back length, longer keel length, shorter chest girth and shorter main wing feather length than the CSF group prior to 12 weeks. The down weight in the CF was heavier than the CSF group (57.1 g vs 41.8 g; p<0.01) prior to 13 weeks. Conclusion: The body weight showed the positive relations for dry feather weight (r = 0.59), down weight (r = 0.69), percent of the down weight of live body weight prior to 13 weeks (r = 0.61).

• Journal of Chest Surgery
• /
• 제20권2호
• /
• pp.411-415
• /
• 1987

We have experienced a rare case of traumatic ventricular septal defect caused by fall down injury. The patient suffered from congestive heart failure after trauma and represented new developing typical murmur. Cardiac catheterization revealed a large left-to-right shunt at the ventricular level and a 4.4:1 ratio of pulmonary to systemic flow. Left ventricular angiogram also showed ventricular septal defect low in the muscular septum. At operation, the right ventricle and pulmonary artery were found to be moderately dilated. A marked systolic thrill was palpable over the right ventricle near the apex. Through a small left ventriculotomy an oval defect, 2x.3 cm with a firm scarred margin, was found in the lower muscular ventricular septum. This defect was repaired using Dacron patch and ventriculotomy was closed with long strip of Teflon felt. Postoperative course was uneventful and discharged in good condition.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.150-157
• /
• 1999

As the customer demands thickness quality stricter, new techniques of automatic thickness control(AGC), is adopted to continuous cold rolling mills. The cold rolling mills of Pohang Works have revamped the existing conventional AGC system that control the thickness at all-stands automatically by the mass flow AGC based on the measurement of strip-speed and thickness between mill stands. The No. 2 Cold Rolling Mill be has adopted the New AGC system since Oct. 1995, and The No.1 Cold Rolling Mill since June. 1999. Thanks to the New AGC system, precise control of thickness is possible not only at constant rolling speed region, but also during line speed up and down. This report describes application techniques of the New AGC system and performance of the system.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.630-637
• /
• 2003

In this paper, a DBM(double balanced mixer) of 2 GHz is implemented on FR4(h=1.6mm, ${\epsilon}_r=4.6$) substrate. The structure of double balanced mixer requires, in general, two talons and a quad diode. For balun, a novel planar balun using microstrip to CPS(Coplanar Strip) is suggested and designed. The suggested balun shows the phase imbalance of $180^{\circ}{\pm}1.5^{\circ}$ and the amplitude imbalance of ${\pm}0.2 dB$ for 1.5 to 2.5 GHz. Using the balun, DBM is successfully implemented, and the measured conversion loss of up/down converter show about 6 dB over the bandwidth. The balun may be applicable for MMIC(Monolithic Microwave Integrated Circuit) DBM with the process supporting backside via though more study.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.619-627
• /
• 2024

By analyzing the structure of the currently used Lead Tab tape structure, the outermost layer, low-temperature fusion functionalized olefin, was composed of pp base. To determine whether this could be used as the outermost layer of tab tape, the adhesive strength to metal foils such as copper and aluminum was measured and the adhesive strength was compared with commercially available functionalized olefin. When chlorine was grafted onto PP among the PP used in the composition, the average adhesive strength was similar to that of commercially available LT200T and superior to RE140R and LE320V. The maximum adhesive strength exceeded that of LE200T. When it comes to solvents, xylene has been shown to be better than any other. Physical methods such as substitution of other monomers, switching of additives or let-down hardly changed the adhesion of grafted PP, and the selection of PP is an important factor in preparing functional polymers.

• 한국통신학회논문지
• /
• 제39C권10호
• /
• pp.930-936
• /
• 2014

본 논문에서 소개하는 스마트 멀티탭은 스마트 폰으로 서버 PC를 통해 제어되는 전자기기이다. 네트워크 망에서 동작하는 스마트 멀티탭은 기존 멀티탭에 무선통신 프로토콜인 Zigbee 통신 모듈을 내장시켜서 사용자가 홈서버를 통해 원격에서 가전기기의 전원을 제어할 수 있게 한다. 게이트웨이의 역할을 하는 홈 서버는 인터넷을 통해 스마트 기기와 연결되어 있다. 본 논문의 최종 결과물을 통해 사용자는 스마트 기기로 멀티탭의 ON/OFF 상태정보를 확인하고 즉시 제어를 하거나 사용자가 원하는 시간에 맞춰 제어를 할 수 있다. OFF시에는 SSR모듈로 전기가 지나가는 통로를 막기 때문에 스마트 멀티탭을 구동하는데 드는 미량의 전력 소모(2watt) 이외에 모든 대기전력이 차단된다. 이를 통해 전기에너지 절감 효과를 기대할 수 있다.

• 한국전자파학회논문지
• /
• 제15권1호
• /
• pp.44-50
• /
• 2004

본 논문에서는 FR4(h= 1.6 mm, $\varepsilon_{{\gamma}}$/=4.6) substrate 상에서 2 GHz 대역의 이중 평형 혼합기를 구현하였다. 일반적으로, DBM(Doubly Balanced Mixer)는 2개의 발룬과 쿼드 다이오드로 구성된다. 발룬을 위해, microstrip과 CPS(Coplanar Strip)을 이용한 새로운 발룬 회로가 제안되고, 설계되어졌다. 제안된 발룬의 측정 결과, 1.5 GHz에서 2.5 GHz내에서 위상의 불평형 정도가 180$^{\circ}$$\pm$ $1.5^{\circ}$이내였으며, 진폭의 불평형 정도가 $\pm$ 0.2 ㏈ 이내였다. 발룬을 사용한 DBM이 성공적으로 구현되었으며, 동작 대역 내에서 up/down 변환기로써 변환 손실은 약 6 ㏈ 정도를 보였다. 더 많은 연구를 통해, backside via를 포함하는 프로세스가 있는 MMIC(Monolithic Microwave Integrated Circuit) DBM에 적용 가능할 것이다.d Circuit) DBM에 적용 가능할 것이다.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1937-1941
• /
• 2004

We present lateral actuated piezoelectric actuator using U-shaped PZT strip and lever structure for the RF switch application. In the previous study of RF switch, they used horizontal contact switch fabricated by thin film metals. However, thin film metals could not generate large contact force due to low stiffness. In this work, we suggest lateral contact switch which makes large contact force by increasing stiffness. In addition, we use PZT actuator for the high force actuation. Generally actuator using thin film PZT moves to the vertical direction due to the neutral axis shift. Therefore we need lateral motion generation mechanism based on the thin film PZT actuator. In order to increase lateral motion of thin film PZT actuator, we use U-shaped PZT actuator using residual stress control. Also, thin film PZT actuator can generate very small lateral motion of 120${\times}$10$^{-6}$ ${\mu}{\textrm}{m}$/V for d$_{31}$ mode, thus we suggest lever structure to increase stroke amplification. From the experimental study, fabricated PZT actuator shows maximum lateral displacement of 1 ${\mu}{\textrm}{m}$, and break down voltage of the thin film PZT actuator is above 16V.