• 한국지반환경공학회 논문집
• /
• 제7권3호
• /
• pp.69-76
• /
• 2006

본 연구는 모래지반에서 공동위에 위치한 연속기초의 지지력거동을 연구하기 위하여 강사법으로 조성된 모래지반에서 모형실험을 수행하였다. 모형실험결과와 이론식을 비교하여 지하공동이 연속기초의 지지력에 영향을 미치는 한계범위를 도출하였다. 한계범위의 크기는 기초의 형상, 지반특성, 공동크기, 공동형상 등 여러 가지 인자에 의존한다. 지하공동의 깊이가 편심거리보다 극한지지력에 더 큰 영향을 주는 것으로 나타났다. 또한 연속기초에 미치는 지하공동의 영향은 편심거리에 따른 지지력 감소현상 뿐만 아니라 연속기초의 부등침하 현상에도 큰 영향을 줄 것으로 판단되었다.

• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.1-6
• /
• 1997

An analysis method for the electromagnetic scattering of a tE polarized plane wave from a periodic strip grating over a grounded dielectric slab is consisered from the viewpoint of reflectio ngraing problem. The strip gratings showing bragg and off-bragg balzing phenomena at the frequency of 10GHz are designed, respectively. The strip grating structure is implemented using aluminum plate (hround conductor), paraffin(dielectric material ; .xi.$_{\gamma}$=2.24) and copper (strip conductor ; 0.08mm thickness). The experimental results (reflection power) for bragg as well as off-bragg blazing phenomenon have been compared with the theoretical results and fairly good agreements between theory and experiment have been observed.ed.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3408-3414
• /
• 1996

This paper investigated plane strain stress intensity factors caused by thermal impact on a center-crack strip. The crack was aligned perpendicularly to the strip boundary. The problem was analysed by determining the dislocation density function in the singular integral equations formulated by the dislocation theory. Under the abrupt temperature change along the edge, the center crack behaved as a mode I crack due to the symmetric geometry. The value of maximum stress intensity factor monotonically increased until the ratio of dimensionless crack length approached to about 0.3, followed by gradual decrease. As a result, a critical corresponding crack length was determined.

• 수산해양교육연구
• /
• 제26권1호
• /
• pp.126-133
• /
• 2014

For boarding comfort and pleasant boarding sensitivity of passenger in passenger ship, there are a few methods such as motion sickness rate or MSI(Motion Sickness Incidence) to assess safety of passenger ship. To find out MSI or motion sickness rate of the training vessel Kaya of Pukyong National University, we use lots of various factors: sea condition, incident angle in main sail way, economic speed, calculation position of motion sickness, sea state, work place and reduce zone of ship. In this paper, we adopted Maxsurf Seakeeper program based on Strip Theory and carefully compared theoretical results with experimental results.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.186-191
• /
• 2001

A crack with electrically impermeable surfaces in an electrostrictive material subjected to uniform electric loading is analysed. The effect of electric yielding on stress intensity factor is investigated by using a small scale yielding model and a strip yield zone model. Complete forms of electric fields and elastic fields are derived by using complex function theory. The electrical yield zone shapes for two models are different each other. The two models, however, predict similar yield zone sizes under the small scale yielding conditions. It is found that the influence of electric yielding on the stress intensity factor is insensitive to the modeling of the electrical yield zone shape.

• 한국항공우주학회지
• /
• 제45권3호
• /
• pp.173-179
• /
• 2017

본 논문에서는 모션캡쳐 카메라를 사용한 실험을 통해 날갯짓 비행체의 주 날개, 꼬리날개 구동기 특성 분석에 대하여 기술하였다. 실험은 빛이 차단된 실내에서 진행되었고 지그에 기체를 고정하여 날갯짓으로 인한 영향을 줄였다. 주 날개와 꼬리날개 끝단에 마커를 부착하였고 모션캡쳐 카메라는 입력 신호에 대한 각각의 반응을 측정한다. 실험 결과 주 날개는 날갯짓의 주파수에 따라 진폭이 변하는 경향을 보였고, Modified Strip Theory에 실험 결과와 비행체 제원을 적용하여 양력 및 추력 발생 시뮬레이션을 구현 하였다. 꼬리날개는 종 횡축별로 스텝 신호를 인가하여 이에 따른 결과를 2차 전달함수 형태로 정의하였고, 각 축별로 구동기의 구조 차이로 인하여 최종 응답시간, 오버슈트, 최대값 등에서 차이를 나타내는 것을 확인하였다.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.909-917
• /
• 2005

Based on the theory that formation of Korean Men's Traditional Trousers is related to Mobius strip, this study researches correlation between distinctive construction of Korean Men's Traditional Trousers and historical background based on old documents and restoration. Distinctive construction of Korean Men's Traditional Trousers are as follows. First, Korean Men's Traditional Trousers is manufactured just like Principle of Mobius strip that the square is twisted once, considering its materials' conditions. Second, Korean Men's Traditional Trousers, manufactured larger, feature cubic effect and twisted formative beauty because its waist and ankle parts are tightened with bands. Third, Korean Men's Traditional Trousers, composed of big Sapok and small Sapok in oblique, are suitable for active play due to its high functionality.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.73-81
• /
• 1991

In order to simulate the ceramic filter in the state of the one-strip electrode, the theory has been analyzed and a computer program has been developed using the energy trapping effect. The ceramic filters were fabricated using the PZT-4 specimen. The necessary condition that the ceramic filter has the energy trapping effect is that the electroded portion frequency should be smaller than the unelectroded portion frequency when the wave number is zero. Each of the average differences of the resonant point and bandwidth between by the theoretical calculations and by experiment results was 5.6[%] and 3.72[%]. It is considered that the one-strip ceramic filter having a desired characteristics and the lowest difference can be fabricated easily by means of the simulation developed in this paper and the fabrication methods.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.253-257
• /
• 2001

This study reveals the sheet metal working with multi-forming type ultra precision process. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming ultra precision progressive die as a bending and drawing working of multi-stage and performed through the try out for thin sheet metal. This part I of papers related to the analysis of production part and strip process layout design through the metal forming simulation by DEFORM and IDEAS.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.86-91
• /
• 2002

The production part requiring multiple processes such as piecing, blanking and notching, are performed with a high production rates in progressive die. In order to prevent the dejects of process result, the optimum of strip process layout design, die design, die making, and tryout with inspection etc. are needed. According to these factors of die development process, they required theory and practice of metal working process and its phenomena, die structure, machining conditions for die making, die materials, heat treatment of die camponents, know-how and so on. In this study, we designed and analyzed die camponents also simulated the strip process layout of multiple stage drawing by DEFORM. Especially the result of tryout and its analysis become to the feature of this study.