• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.68.3-68
• /
• 2001

We describe the looper controller design for a hot strip mill. The looper is to control the strip tension which influences on the width of the strip. It is very important to control the looper control of the hot strip mill, but difficult to control the looper, because there exists mutual interaction among strip gauge, looper angle, and strip tension. In this paper, we present the modeling for the looper of a hot strip mill to control the tension of the strip and suggest a eigenstructure assignment method. The eigenstructure assignment is useful tool that allows the designer to satisfy damping, settling time, and mode decoupling specifications directly by choosing eigenvalue and eigenvectors. Desired eigenvalue and eigenvector are chosen to satisfy the desired responses.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.33-40
• /
• 1991

The decrease in surface roughness of work roll and steel strip in cold rolling of low carbon steel strip has been investigated by working distance, materials, total separating force and total reduction ratio. The main results are as follows; For the same lubricating conditions. 1) The changing of surface roughness of steel strip were similar to work roll. The transcription ratio is in inverse proportion to the carbon content of steel strip. 2) The surface roughness of steel strip is hardly change according to changing of total separating force and total reduction ration. 3) The wear of work rolls surface is more rapid in that case of continuous casted steel strip than ingot casted steel strip. The aluminium content dull powder adhere on the rolls surface, and so. It makes the mirror surface of work roll accelerate.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.24-29
• /
• 2015

This paper designs a looper-tension controller for strip top-tail parts in hot strip finishing mills. A three-degree linear model of the looper-tension system is derived by a Taylor's linearization method, where the actuator's dynamics are ignored because of their fast responses. A feedforward shaping controller for the strip top part and a feedforward model reference controller for the strip tail part are respectively designed, they are combined with an ILQ(Inverse Linear Quadratic optimal control) feedback controller for the strip middle part. It is shown from by a computer simulation that the proposed controller is very effective to the strip top-tail parts including the middle part.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.23-29
• /
• 2008

This study analyzes the rolled circular rod strip with radius of loom and length of 350cm by using finite element analysis. The material strength and its durability of the rolled strip can be predicted through this study. As the penetration tolerance by contact decreases, the contact rigidity of strip increases. As the contact rigidity becomes the highest at the elapsed time of 1.2 second, the contact stress becomes the lowest. On the contrary, von-Mises stress becomes highest at this time. The total deformation on strip increases from the upper part of strip at the position near to rotating roll to the lower part of strip at the position near to fixing roll.

• 한국자기학회지
• /
• 제12권1호
• /
• pp.34-40
• /
• 2002

고에너지 Nd-Fe-B 소결자석 제조용 strip-cast 합금의 미세조직 개선을 위하여, Nd-Fe-B 합금을 다양한 조건하에서 strip casting법으로 제조한 후, 제조 조건이 상 형성, 상 분포 및 조직 형성에 미치는 영향을 조사하였다. 냉각속도 즉, wheel speed가 5 m/s 이하일 때 고특성 소결자석 제조에 적합한 미세조직을 갖는 Strip 합금들을 제조할 수 있었으며, 이때의 한계 조성은 Nd$_{14}$Fe$_{79}$B$_{7}$ 정도로 추정되었다. 또한 조성에 상관없이 5 m/s 이하에서는 strip 표면에 수직한 방향으로 <001> preferred orientation이 발생하였는데, 이것은 궁극적으로 합금의 분쇄.성형시 결정립 배향도 향상에 유리하게 작용할 것으로 보인다. 한편 냉각속도가 증가할수록 Nd$_2$Fe$_{14}$B 결정립의 미세화로 인하여 보자력이 증가하였으나, Nd 함량이 감소할 경우 $\alpha$-Fe 정출의 증가로 인하여 보자력이 감소하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.464-466
• /
• 2009

This study tried to examine the suitability of strip casting process such as PFC (Planar Flow Casting) method for soldering Au-Sn strip. The effect of heat treatment on the tensile behavior and mechanical properties of an Au-Sn strip was investigated through tensile test, micro hardness test, X-ray diffraction (XRD), SEM, and TEM observations. It was apparent that 20-mm width Au-Sn strip could be well produced by using planar flow casting process. Tensile results showed that tensile strength increased from 338.3MPa to 310MPa and plastic strain improved from 0% to 1.5% with heat treatment ($170^{\circ}C$/70 hrs.). The microstructure of Au-Sn strip mainly consisted of two phases; $Au_5Sn(\zeta)$ and AuSn($\sigma$). It was also found that inhomogeneous amorphous local structure continuously changed to the homogeneous two phases microstructure with heat treatment. The fractographical observation after tensile test indicated the cleavage fracture mode of as-casted Au-Sn strip. On the other hand, the heat treated Au-Sn strip showed that fracture propagated along interface between brittle AuSn and ductile $Au_5Sn$ phases. The deformation behavior of strip casted Au-Sn alloy with microstructural evolution and the improve method for ductility of this alloy was also suggested.

• 비파괴검사학회지
• /
• 제28권2호
• /
• pp.205-210
• /
• 2008

파이프라인의 원거리 초음파검사를 위한 자왜 스트립형의 비틀림 모드 도파 변환기에 널리 사용되는 니켈 스트립과 철 코발트합금 스트립의 자기이력곡선을 측정하고 스트립의 자기적 특성이 변환기의 감도에 미치는 영향을 분석하였다. 최적화된 철 코발트합금 변환기의 감도는 니켈 변환기의 그것보다 약 30 배 정도로 우수하였다. 이는 두 자왜물질의 잔류자화 및 보자력의 차이에 주로 기인함이 밝혀졌다.

• 한국환경농학회지
• /
• 제33권1호
• /
• pp.30-36
• /
• 2014

BACKGROUND: Best management practices are often implemented to control nonpoint source pollutants. Best management practices need to be simulated and analyzed for effective Best management practices implementations. Filter strip is one of effective Best management practices in agricultural areas. METHODS AND RESULTS: Soil and Water Assessment Tool model was selected to explore the effectiveness of filter strip to control total phosphorous in Golji watershed. Soil and Water Assessment Tool model was calibrated for flow and total phosphorous by Sequential Uncertainty Fittin ver.2 algorithm provided in Soil and Water Assessment Tool-Calibration and Uncertainty Procedures. Three scenarios defined by filter strip width were applied. The filter strip width of 5 m was able to reduce the most amount of total phosphorous. In other words, the total phosphorous reduction by filter strip of 5 m was 28.0%, while the reduction was 17.5% by filter strip of 1 m. However, the reduction per unit filter strip width were 17.4%, 8.0%, and 4.5% for 1 m, 3 m, and 5 m of filter strips, respectively. CONCLUSION: Best management practices need to be simulated and analyzed so that the BMP scenario can be cost-effective. A large size of BMP might be able to control large amount of pollutants, however it would not be indicated as a cost-effective strategy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2513-2515
• /
• 2000

The Hot Strip Mill(HSM) process consists of reheating furnace, roughing mill, finishing mill and coiler. Reheating furnace heats slab and roughing mill, finishing mill produces strip from this slab. The quality of this production mainly depends on finishing mill, which consists of 6 or 7 stands. Between stands a looper is installed for the better material flow. Automatic gage control(AGC), speed control system and looper system, which are connected with each other, are the main control systems for HSM. The low strip tension can make a loop between stands, which can be caused cobble. On the other hand, high strip tension causes thickness and width reduction, which affects the product quality, and can lead to tear the strip, if it is too high. Because of it, a proper strip tension is needed for better material flow: e.g. A good looper control system is substantial for the better production quality. What is handled in this paper is, the looper controller, which is developed to minimize the fluctuation of width of strip by maintaining an appropriate strip tension between stands and to achieve the stability of the looper control system. And its performance compared with a conventional PID controller is also discussed. The difficulties associated with the maintenance of the constant tension are described.

• 한국자기학회지
• /
• 제14권5호
• /
• pp.196-200
• /
• 2004

고에너지 Nd-Fe-B소결자석 제조용 strip-cast합금의 미세조직을 개선하기 위하여, Nd$_{14}$Fe$_{80}$B$_{6}$6의 기본 조성에 소량의 Cu (0.3 ～ 1.0 at%) Co (0.5 ～ 1.5 at%)를 각각 첨가하고 strip-casting법으로 합금을 제조한 후, 이들 Fe 치환원소의 첨가량 변화가 합금의 상형성, 상분포 및 조직 형성에 미치는 영향을 조사하였다. Cu첨가량이 증가함에 따라 용탕의 유동성이 증가하여 strip 두께가 감소함과 함께 strip표면에 수직한 방향으로의 수지상정 발달이 억제되었으나, Co첨가량이 증가한 경우에는 strip두께의 증가와 함께 strip표면에 수직한 방향으로 수지상정이 잘 발달하여 <001>방향으로의 preferred orientation이 증가하는 경향을 보였다. 이들 Cu와 Co의 첨가는 모두 수지상정을 미세화하는 효과가 있었으나, Cu는 Fe의 정출을 안정화시키는 경향이 있어서 Cu가 함유된 함금에서는 종종 Fe가 종종 정출한 반면, Co는 초정 Fe의 정출을 억제하는 효과가 있었다. 한편, 소량의 Zr (0.3, 0.5 at%)을 첨가하였을 때에는 전체적인 결정립의 조대화와 함께 수지상정의 붕괴를 초래하였다.