Browse > Article

Finite Element Analysis on Contact and Work Stress of Rolled Strip  

Cho, Jae-Ung (공주대학교 기계.자동차공학부)
Han, Moon-Sik (계명대학교 기계.자동차공학부)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.17, no.2, 2008 , pp. 23-29 More about this Journal
Abstract
This study analyzes the rolled circular rod strip with radius of loom and length of 350cm by using finite element analysis. The material strength and its durability of the rolled strip can be predicted through this study. As the penetration tolerance by contact decreases, the contact rigidity of strip increases. As the contact rigidity becomes the highest at the elapsed time of 1.2 second, the contact stress becomes the lowest. On the contrary, von-Mises stress becomes highest at this time. The total deformation on strip increases from the upper part of strip at the position near to rotating roll to the lower part of strip at the position near to fixing roll.
Keywords
Rolled strip; Strength; Durability; Penetration; von Mises stress; Total deformation;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Kim, G. D. and Kim, J. Y., 2006, "Benchmark Study on Surface Roughness and Mechanical Properties of Rapid Prototypes," Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 4, pp. 56-62   과학기술학회마을
2 Lee, C. W., Kang, H. K., and Shin, K. H., 2004, "A Study on the Fault Diagnosis of the 3-D Roll Shape in Cold Rolling," Journal of Mechanical Science and Technology KSME International Journal, Vol. 18, No. 12, pp. 2174-2181
3 Kim, K. J., Shin, K. S., Jeong, H. T., and Paik, Y. N., 2005, "Textures Evolution of Rolled AA5182 Alloy Sheets after Annealing," Transactions of the Korean Society of Automotive Engineers, Vol. 13, No. 6, pp. 128-134   과학기술학회마을
4 John Swanson, 2005, Nonlinear advanced course, Tae Sung S&E Inc., Republic of Korea
5 Ko, Y. S., Yoon, H. J., and Kim, N. S., 2002, "Prediction of Sperad and Contact Region in Ring Rolling Process Using Rigid-Plastic Finite Element Method," Transactions of the Korean Society of Mechanical Engineers A, Vol. 26, No. 12, pp. 2670-2677   DOI
6 Cho, J. U. and Han, M. S., 2007, "Study on the Dynamic Fracture of Rod Impacting on Plate at High Speed," Transactions of the Korean Society of Machine Tool Engineers, Vol. 16, No. 4, pp. 108-112   과학기술학회마을
7 Kim, K. W., 2006, "Finite Element Analysis of a Steady-state Rolling Tire Taking the Effect of Tread Pattern into Account," International Journal of Automotive Technology, Vol. 7, No. 1, pp. 101-107   과학기술학회마을
8 John Swanson, 2006, Ansys 10.0, Ansys. Inc., U.S.A
9 Park, J. J. and Lee, S. J., 2003, "Design of Rolling Pass Schedule utilizing Grain Refinement by Strain Accumulation," Transactions of the Korean Society of Mechanical Engineers A, Vol. 27, No. 3, pp. 464-471   DOI